Jan-09 LTM4615 144LD 15.00mm X 15.00mm X 2.82mm (TABLE OF MATERIAL DECLARATION) The LTM4615 is RoHS compliant per EU RoHS Directive 2003/95/EC. No. 1 2 3 4 5 6 Note: It contains less than 100ppm cadmium (Cd) and less than 1,000ppm of each - lead (Pb), mercury (Hg), hexavalent chromium (Cr+), polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE) Component Weight Material Mass Materials Analysis Part Name Material Name Materials Analysis (element) CAS Number (gram) (gram) (weight %) Barium Compounds 7727-43-7 0.00352 1.5 Substrate Circuit Board 0.2345 Filler Substances (Silica 0.09360 39.91457 Crystalline) Copper Metal 7440-50-8 0.13132 56 Copper Compounds 1328-53-6 0.00004 0.018 Ecotoxic substances 7439-92-1 0.00000 0.00043 Gold metal or alloy 7440-57-5 0.00108 0.46 Nickel 7440-02-0 0.00492 2.1 Zinc 7440-66-6 0.00002 0.007 Solder Paste Alloy 0.0246 Sn 7440-31-5 0.02337 95.0 Sb 7440-36-0 0.00123 5.0 7439-89-6 Passive/Active 0.3621 Iron Powder (Fe) 0.16371 45.210 7440-50-8 Components Copper (Cu) 0.08995 24.840 7440-02-0 Nickel (Ni) 0.00067 0.185 7440-31-5 Tin (Sn) 0.00036 0.099 Miscellaneous 0.10740 29.660 Active Ics Silicon 0.0124 Silicon 7440-21-3 0.01240 100 Wire Gold 0.0021 Au 7440-57-5 0.00210 99.99 Encapsulation 0.9827 Epoxy Resin Fused Silica 60676-86-0 0.75864 77.2 Epoxy Resin 0.08746 8.9 Phenol Resin 0.08746 8.9 Crytalline Silica 14808-60-7 0.02948 3.0 Carbon Black 1333-86-4 0.00491 0.5 Metal Hydroxide 0.01474 1.5 Total Package Weight 1.6184 Composition derived from MSDS and material C of C from Vendors Component Weight based on assembly of generic parts