View PDF

-1-
FINAL PRODUCT/PROCESS CHANGE NOTIFICATION
Generic Copy
25-AUG-2003
SUBJECT: ON Semiconductor Final Product/Process Change Notification #13015
TITLE: Final Notification for IPCN#12477 - Switching Diode Transfer to ISMF Fab
EFFECTIVE DATE: 25-Oct-2003
AFFECTED CHANGE CATEGORY:
ON Semiconductor Fab Site
Subcontractor Fab Site
Die Shrink
AFFECTED PRODUCT DIVISION: Bipolar Discretes Products Div
ADDITIONAL RELIABILITY DATA: Available
Contact your local ON Semiconductor Sales Office or Laura Rivers <[email protected]>
SAMPLES: Contact your local ON Semiconductor Sales Office
or Dianne Von Borstel <[email protected]>
FOR ANY QUESTIONS CONCERNING THIS NOTIFICATION:
Contact Sales Office or Brenda Cunningham <[email protected]>
NOTIFICATION TYPE:
Final Product/Process Change Notification (FPCN)
Final change notification sent to customers. FPCNs are issued at least 60 days prior to implementation
of the change.
ON Semiconductor will consider this change approved unless specific conditions of acceptance
are provided in writing within 30 days of receipt of this notice. To do so, contact your local ON
Semiconductor Sales Office.
DESCRIPTION AND PURPOSE:
This is the second of three FPCNs that will be issued to complete the changes stated in IPCN #12477 High Frequency, High Voltage NPN Transistors and Switching Diode Transfer from Primarion Fab to
ISMF Fab.
This notification applies only to the finished goods affected device list below. The list is comprised of
Switching Diodes only. In order to continue to fully support our customer's requirements for Switching
Diodes, the fabrication of these devices is being moved from ON Semiconductor's current
subcontractor wafer fab, Primarion in Phoenix Arizona to ON Semiconductor's internal wafer fab
ISMF in Seremban, Malaysia. The Seremban site is TS16949 and ISO9001:2000 certified.
A non-active area die size reduction will take place to optimize our assembly process. Power handling
and surge capability will not be affected by this reduction. See data below for verification.
Issue Date: 25 Aug, 2003
Page 1 of 3
-2-
Final Product/Process Change Notification #13015
RELIABILITY DATA SUMMARY:
Qualification Vehicle: [Qualification by die similarity]
BAS16LT1 [Die Qualified in SOT-23 package in SBN, Malaysia, and LPS,China]
Qual Vehicle
BAS16LT1
Technology
Switching Diode
Reason Chosen
Similarity to transferring device,
BAS116LT1.
Device = BAS16LT1
TEST:
CONDITIONS
A/clave
Ta = 121 deg C,
P =15 psig, RH = 100%
INTERVAL
0 hrs
96 hrs
SIZE
231
231
FAILURES
0
0
TC
Ta = -65/150 deg C, Air to Air
Dwell >= 10 min.
0 hrs
500 cyc
1000 cyc
231
231
231
0
0
0
H3TRB
Ta = 85 deg C,
RH = 85%, VR = 0.8V
0 hrs
504 hrs
1008 hrs
231
231
231
0
0
0
HTRB
Ta = 150 deg C, VR = 0.8V
0 hrs
504 hrs
1008 hrs
231
231
231
0
0
0
IOL
Ta = 25 deg C, delta
Tj => 100 deg C,
2 minutes on/off
0 cyc
7500 cyc
15000 cyc
231
231
231
0
0
0
Electro Static
Discharge
Human Body Model
Machine Model
N/A
N/A
6
6
Class 1 <2kV
Class C >400V
ELECTRICAL CHARACTERISTIC SUMMARY:
CHARACTERIZATION DATA SUMMARY:
BAS116LT1
Temp:
25C
25C
25C
Parameter:
VF1
VF2
VF3
Condition:
@IF=1mA
@IF=10mA
@IF=50mA
Max Limit:
9.00E-01
1.00E+00
1.10E+00
Min Limit:
----
25C
VF4
@IF=150mA
1.25E+00
--
25C
IR1
@VR=75V
5.00E-12
--
CONTROL
Min:
Max:
Average:
Std Dev:
7.57E-01
7.62E-01
7.59E-01
1.05E-03
8.38E-01
8.42E-01
8.40E-01
8.75E-04
9.05E-01
9.08E-01
9.06E-01
7.45E-04
9.78E-01
9.83E-01
9.81E-01
1.33E-03
1.63E-11
4.07E-11
2.63E-11
6.29E-12
QUAL LOT - A
Min:
Max:
Average:
Std Dev:
7.55E-01
7.58E-01
7.57E-01
7.54E-04
8.37E-01
8.40E-01
8.38E-01
8.01E-04
8.99E-01
9.03E-01
9.01E-01
1.33E-03
9.63E-01
9.74E-01
9.68E-01
3.51E-03
2.97E-11
5.32E-11
4.26E-11
7.15E-12
Issue Date: 25 Aug, 2003
Page 2 of 3
-3-
Final Product/Process Change Notification #13015
QUAL LOT - B
Min:
Max:
Average:
Std Dev:
7.55E-01
7.58E-01
7.56E-01
8.75E-04
8.38E-01
8.40E-01
8.39E-01
8.13E-04
9.00E-01
9.04E-01
9.02E-01
1.27E-03
9.66E-01
9.75E-01
9.70E-01
2.70E-03
4.37E-11
7.19E-11
5.56E-11
8.24E-12
QUAL LOT - C
Min:
Max:
Average:
Std Dev:
7.57E-01
7.59E-01
7.58E-01
4.89E-04
8.39E-01
8.40E-01
8.39E-01
4.89E-04
9.00E-01
9.03E-01
9.02E-01
8.94E-04
9.63E-01
9.72E-01
9.69E-01
2.48E-03
2.53E-11
5.47E-11
4.11E-11
7.79E-12
Control Max
0.749
2.499
Lot A Max
0.747
2.537
Lot B Max
0.557
2.499
Lot C Max
0.974
2.503
SURGE DATA SUMMARY:
Parameter
Spec Min.
IF (A)
0.2
IFSM (A)
0.5
CHANGED PART IDENTIFICATION:
No Physical marking change. Beginning with date code 0342, customers may receive units from either
site.
AFFECTED DEVICE LIST (WITHOUT SPECIALS):
PART
BAS116LT1
BAV199LT1
Issue Date: 25 Aug, 2003
Page 3 of 3