LSU405 LOW NOISE, LOW DRIFT MONOLITHIC DUAL N-CHANNEL JFET Linear Systems replaces discontinued Siliconix U405 with LSU405 The U405/ LSU405 is a Low Noise, Low Drift, Monolithic Dual N-Channel JFET The LSU405 is a high-performance monolithic dual JFET featuring extremely low noise, tight offset voltage and low drift over temperature specifications, and is targeted for use in a wide range of precision instrumentation applications. The LSU405 features a 5mV offset and 10-µV/°C drift. The LSU405 is a direct replacement for discontinued Siliconix U405. The hermetically sealed TO-71 & TO-78 packages are well suited for military applications. . (See Packaging Information). U405 / LSU405 Applications: Wideband Differential Amps High-Speed,Temp-Compensated SingleEnded Input Amps High-Speed Comparators Impedance Converters and vibrations detectors. ELECTRICAL CHARACTERISTICS @ 25°C (unless otherwise noted) SYMBOL CHARACTERISTICS MIN. BVGSS Breakdown Voltage 50 BVGGO Gate‐To‐Gate Breakdown ±50 TRANSCONDUCTANCE YfSS Full Conduction 2000 YfS Typical Operation 1000 |YFS1‐2 / Y FS| Mismatch ‐‐ DRAIN CURRENT IDSS Full Conduction 0.5 |IDSS1‐2 / IDSS| Mismatch at Full Conduction ‐‐ GATE VOLTAGE VGS(off) or Vp Pinchoff voltage ‐0.5 VGS(on) Operating Range ‐‐ GATE CURRENT ‐IGmax. Operating ‐‐ ‐IGmax. High Temperature ‐‐ ‐IGSSmax. At Full Conduction ‐‐ ‐IGSSmax. High Temperature 5 OUTPUT CONDUCTANCE YOSS Full Conduction ‐‐ YOS Operating ‐‐ COMMON MODE REJECTION CMR ‐20 log | V GS1‐2/ V DS| 95 NOISE NF Figure ‐‐ en Voltage ‐‐ CAPACITANCE CISS Input ‐‐ CRSS Reverse Transfer ‐‐ FEATURES LOW DRIFT LOW NOISE LOW PINCHOFF ABSOLUTE MAXIMUM RATINGS @ 25°C (unless otherwise noted) | V GS1‐2 / T| = 10µV/°C TYP. en = 6nV/Hz @ 10Hz TYP. Vp = 2.5V TYP. Maximum Temperatures Storage Temperature ‐65°C to +150°C Operating Junction Temperature +150°C Maximum Voltage and Current for Each Transistor – Note 1 ‐VGSS Gate Voltage to Drain or Source 50V ‐VDSO Drain to Source Voltage 50V ‐IG(f) Gate Forward Current 10mA Maximum Power Dissipation Device Dissipation @ Free Air – Total 300mW MATCHING CHARACTERISTICS @ 25°C UNLESS OTHERWISE NOTED SYMBOL CHARACTERISTICS VALUE UNITS CONDITIONS | V GS1‐2 / T| max. DRIFT VS. 40 µV/°C VDG=10V, ID=200µA TEMPERATURE TA=‐55°C to +125°C | V GS1‐2 | max. OFFSET VOLTAGE 20 mV VDG=10V, ID=200µA TYP. 60 ‐‐ ‐‐ ‐‐ 0.6 ‐‐ 1 ‐‐ ‐‐ ‐4 ‐‐ ‐‐ 5 ‐‐ 0.2 ‐‐ ‐‐ 20 ‐‐ ‐‐ MAX. ‐‐ ‐‐ 7000 2000 3 10 5 ‐2.5 ‐2.3 ‐15 ‐10 100 5 20 2 ‐‐ 0.5 ‐‐ 8 1.5 UNITS V V µmho µmho % mA % V V pA nA pA pA µmho µmho dB dB nV/√Hz pF pF CONDITIONS VDS = 0 ID=1nA I G= 1nA ID= 0 IS= 0 VDG= 10V VGS= 0V f = 1kHz VDG= 15V ID= 200µA f = 1kHz VDG= 10V VGS= 0V VDS= 15V ID= 1nA VDS=15V ID=200µA VDG= 15V ID= 200µA TA= +125°C VDS =0 VDG= 15V TA= +125°C VDG= 10V VGS= 0V VDG= 15V ID= 500µA VDS = 10 to 20V ID=30µA VDS= 15V VGS= 0V RG= 10M f= 100Hz NBW= 6Hz VDS=15V ID=200µA f=10Hz NBW=1Hz VDS= 15V ID= 200µA f= 1MHz Click To Buy Note 1 – These ratings are limiting values above which the serviceability of any semiconductor may be impaired TO-71 / TO-78 (Top View) Micross Components Europe Available Packages: U405 / LSU405 in TO-71 & TO-78 U405 / LSU405 available as bare die Please contact Micross for full package and die dimensions Tel: +44 1603 788967 Email: [email protected] Web: http://www.micross.com/distribution Information furnished by Linear Integrated Systems and Micross Components is believed to be accurate and reliable. However, no responsibility is assumed for its use; nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Linear Integrated Systems.