LS844 MONOLITHIC DUAL N-CHANNEL JFET Linear Systems Ultra Low Leakage Low Drift Monolithic Dual JFET The LS844 is a high-performance monolithic dual JFET featuring extremely low noise, tight offset voltage and low drift over temperature specifications, and is targeted for use in a wide range of precision instrumentation applications. The LS844 features a 5mV offset and 10-µV/°C drift. The 8 Pin P-DIP and 8 Pin SOIC provide ease of manufacturing, and the symmetrical pinout prevents improper orientation. (See Packaging Information). LS844 Applications: Wideband Differential Amps High-Speed,Temp-Compensated SingleEnded Input Amps High-Speed Comparators Impedance Converters and vibrations detectors. FEATURES LOW DRIFT | V GS1‐2 / T| ≤10µV/°C LOW LEAKAGE IG = 15pA TYP. LOW NOISE en = 3nV/√Hz TYP. LOW OFFSET VOLTAGE | V GS1‐2| ≤5mV ABSOLUTE MAXIMUM RATINGS @ 25°C (unless otherwise noted) Maximum Temperatures Storage Temperature ‐65°C to +150°C Operating Junction Temperature +150°C Maximum Voltage and Current for Each Transistor – Note 1 ‐VGSS Gate Voltage to Drain or Source 60V ‐VDSO Drain to Source Voltage 60V ‐IG(f) Gate Forward Current 50mA Maximum Power Dissipation Device Dissipation @ Free Air – Total 400mW @ +125°C MATCHING CHARACTERISTICS @ 25°C UNLESS OTHERWISE NOTED SYMBOL CHARACTERISTICS VALUE UNITS CONDITIONS | V GS1‐2 / T| max. DRIFT VS. 10 µV/°C VDG=10V, ID=500µA TEMPERATURE TA=‐55°C to +125°C | V GS1‐2 | max. OFFSET VOLTAGE 5 mV VDG=10V, ID=500µA ELECTRICAL CHARACTERISTICS @ 25°C (unless otherwise noted) SYMBOL CHARACTERISTICS MIN. TYP. BVGSS Breakdown Voltage 60 ‐‐ BVGGO Gate‐To‐Gate Breakdown 60 ‐‐ TRANSCONDUCTANCE YfSS Full Conduction 1500 ‐‐ YfS Typical Operation 1000 1500 |YFS1‐2 / Y FS| Mismatch ‐‐ 0.6 DRAIN CURRENT IDSS Full Conduction 1.5 5 |IDSS1‐2 / IDSS| Mismatch at Full Conduction ‐‐ 1 GATE VOLTAGE VGS(off) or Vp Pinchoff voltage 1 ‐‐ VGS(on) Operating Range 0.5 ‐‐ GATE CURRENT ‐IGmax. Operating ‐‐ 15 ‐IGmax. High Temperature ‐‐ ‐‐ ‐IGmax. Reduced VDG ‐‐ 5 ‐IGSSmax. At Full Conduction ‐‐ ‐‐ OUTPUT CONDUCTANCE YOSS Full Conduction ‐‐ ‐‐ YOS Operating ‐‐ 0.2 |YOS1‐2| Differential ‐‐ 0.02 COMMON MODE REJECTION CMR ‐20 log | V GS1‐2/ V DS| 90 110 ‐20 log | V GS1‐2/ V DS| ‐‐ 85 NOISE NF Figure ‐‐ ‐‐ en Voltage ‐‐ ‐‐ ‐‐ ‐‐ CAPACITANCE CISS Input ‐‐ ‐‐ CRSS Reverse Transfer ‐‐ ‐‐ CDD Drain‐to‐Drain ‐‐ 0.5 MAX. ‐‐ ‐‐ ‐‐ ‐‐ 3 15 5 3.5 3.5 50 50 30 100 20 2 0.2 ‐‐ ‐‐ 0.5 7 11 8 3 ‐‐ UNITS V V µmho µmho % mA % V V pA nA pA pA µmho µmho µmho dB CONDITIONS VDS = 0 ID=1nA I G= 1nA ID= 0 IS= 0 VDG= 15V VGS= 0V f = 1kHz VDG= 15V ID= 500µA VDG= 15V VGS= 0V VDS= 15V ID= 1nA VDS=15V ID=500µA VDG= 15V ID= 500µA TA= +125°C VDG = 3V ID= 500µA VDG= 15V , VDS =0 VDG= 15V VGS= 0V VDG= 15V ID= 500µA Click To Buy Note 1 – These ratings are limiting values above which the serviceability of any semiconductor may be impaired dB nV/√Hz pF ∆VDS = 10 to 20V ID=500µA ∆VDS = 5 to 10V ID=500µA VDS= 15V VGS= 0V RG= 10MΩ f= 100Hz NBW= 6Hz VDS=15V ID=500µA f=1KHz NBW=1Hz VDS=15V ID=500µA f=10Hz NBW=1Hz VDS= 15V, ID=500µA VDG= 15V, ID=500µA PDIP & SOIC (Top View) Available Packages: LS844 / LS844 in PDIP & SOIC LS844 / LS844 available as bare die Please contact Micross for full package and die dimensions Tel: +44 1603 788967 Email: [email protected] Web: http://www.micross.com/distribution Information furnished by Linear Integrated Systems and Micross Components is believed to be accurate and reliable. However, no responsibility is assumed for its use; nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Linear Integrated Systems.