Data sheet... SAK Series SAKS 3 GZ/6.3X32 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com The fuse terminals of the Weidmüller SAK series are available in two different forms: • Fuse terminal with pivoting retaining lever • Fuse terminal with screwed cap General ordering data Order No. Type Version GTIN (EAN) Qty. 0248920000 SAKS 3 GZ/6.3X32 SAK Series, Fuse terminal, Rated cross-section: 10 mm², Screw connection, KrG, Medium yellow, Direct mounting, TS 32 4008190109738 20 pc(s). Creation date September 11, 2012 12:31:27 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 1 Data sheet... SAK Series SAKS 3 GZ/6.3X32 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions Length Height Net weight 54 mm 61 mm 44.6 g Width Height of lowest version -60 °C Storage temperature Continuous operating temp., max. No 1 Snap-on Installation advice Open sides Direct mounting right 12400-198 10 A 22 AWG Voltage size C (CSA) Wire cross section max. (CSA) 600 V 10 AWG Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max. 13 mm 61 mm Temperatures Operating temperature Continuous operating temp., min. 130 °C Additional technical data Explosion-tested version Number of similar terminals Type of mounting CSA ratings data Certificate No. (CSA) Current size C (CSA) Wire cross section min. (CSA) Clampable wires (additional connection) Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, min. 0.5 mm² 10 mm² Clampable wires (rated connection) Type of connection Screw connection Blade size 1.0 x 5.5 mm Number of connections 2 Clamping range, rated connection, max. 16 mm² Tightening torque, min. 1.2 Nm Torque level with DMS electric screwdriver 4 Wire connection cross section, solid core, max. rated connection 0.5 mm² Wire connection cross section, stranded, rated connection, min. 1.5 mm² Wire connection cross section, finely stranded, max. 10 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, min. 0.5 mm² Wire connection cross section AWG, min. AWG 22 Stripping length Connection direction Clamping range, rated connection, min. Clamping screw Tightening torque, max. Gauge to IEC 60947-1 12 mm on side 0.33 mm² M4 2.4 Nm Rated voltage Rated current Pollution severity 500 V 10 A 3 B6 Wire connection cross section, solid core max. rated connection 16 mm² Wire connection cross section, stranded, rated connection, max. 10 mm² Wire connection cross-section, finely stranded, min. 0.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, max. 10 mm² Wire connection cross section AWG, max. AWG 10 Rated data Rated cross-section Rated impulse withstand voltage Current at maximum wires 10 mm² 6 kV 10 A Creation date September 11, 2012 12:31:27 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 2 Data sheet... SAK Series SAKS 3 GZ/6.3X32 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data UL ratings data Certificate No. (UR) E60693VOL1SEC10 Current size C (UR) 8A Conductor size Factory wiring min. (UR) 26 AWG Voltage size C (UR) 600 V Conductor size Factory wiring max. (UR) 8 AWG Conductor size Field wiring max. (UR) 8 AWG KrG Medium yellow Material UL 94 flammability rating KrG V-0 SAK Series on side 2 No Yes Type of connection Number of levels No. of clamping points per level Mounting rail Screw connection 1 2 TS 32 500 V Type of voltage for indicator AC/DC G-Si. 6.3 x 32 for screw fixing AC/DC Display Operating voltage, max. Without LED 500 V EC000899 30-21-18-11 27-14-11-16 27-14-11-16 ETIM 3.0 eClass 4.1 eClass 6.0 EC000899 27-14-11-16 27-14-11-16 Material data Insulating material Colour System specifications Product family Connection direction Number of connections Levels cross-connected internally End cover plate required Display element Operating voltage for display, max. Fuse terminals Cartridge fuse Fuse holder (cartridge holder) Type of voltage for indicator Classifications ETIM 2.0 UNSPSC eClass 5.1 eClass 7.0 Product information Descriptive text ordering data Product description SAKS 3 1''x1/4'' with a red cap available under 0211120000. 500 ac/dc Approvals Approvals Creation date September 11, 2012 12:31:27 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 3