Data sheet... SAK terminal with screw connection SAK 35N KRG Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com The Weidmüller SAK feed-through terminals satisfy the requirements of IEC 60947-1 and are available with rated cross-sections from 0.08 mm² to 240 mm². General ordering data Order No. Type Version GTIN (EAN) Qty. 0550620000 SAK 35N KRG SAK terminal with screw connection, Feedthrough terminal, Rated cross-section: 35 mm², Screw connection, KrG, Medium yellow 4008190168674 20 pc(s). Creation date September 11, 2012 12:13:47 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 1 Data sheet... SAK terminal with screw connection SAK 35N KRG Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions Length Height Weight 58 mm 67.5 mm 72.85 g Width Height of lowest version Net weight 16 mm 67.5 mm 72.65 g -60 °C Storage temperature Continuous operating temp., max. 130 °C No right Double terminal Number of similar terminals Type of mounting 1 Clamped 154685-1501714 120 A 12 AWG Voltage size C (CSA) Wire cross section max. (CSA) 600 V 2 AWG Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max. Temperatures Operating temperature Continuous operating temp., min. Additional technical data Explosion-tested version Open sides Version CSA ratings data Certificate No. (CSA) Current size C (CSA) Wire cross section min. (CSA) Clampable wires (additional connection) Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, min. 1.5 mm² 35 mm² Clampable wires (rated connection) Type of connection Blade size Number of connections Clamping range, rated connection, max. Tightening torque, min. Gauge to IEC 60947-1 Screw connection 6.5 x 1.2 mm 2 50 mm² 4 Nm B8 Wire connection cross section, solid core max. rated connection 16 mm² Wire connection cross section, stranded, rated connection, max. 50 mm² Wire connection cross-section, finely stranded, min. 2.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, max. 35 mm² Wire connection cross-section, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, max. 35 mm² Twin wire-end ferrules, max. 16 mm² Wire connection cross section AWG, max. AWG 2 Stripping length 18 mm Connection direction on side Clamping range, rated connection, min. 2.5 mm² Clamping screw M6 Tightening torque, max. 5 Nm Wire connection cross section, solid core, max. rated connection 2.5 mm² Wire connection cross section, stranded, rated connection, min. 4 mm² Wire connection cross section, finely stranded, max. 35 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, min. 1.5 mm² Cross-section for connected conductor, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, min. 2.5 mm² Twin wire-end ferrules, min. Wire connection cross section AWG, min. 1.5 mm² AWG 12 Creation date September 11, 2012 12:13:47 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 2 Data sheet... SAK terminal with screw connection SAK 35N KRG Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Rated data Rated cross-section Rated impulse withstand voltage Current at maximum wires Pollution severity Rated voltage Rated current Standards Voltage size C (UR) 600 V Conductor size Factory wiring max. (UR) 2 AWG Conductor size Field wiring max. (UR) 2 AWG KrG Medium yellow Material UL 94 flammability rating SAK terminal with screw connection on side 2 No Yes Type of connection Number of levels No. of clamping points per level Mounting rail EC000897 30-21-18-11 27-14-11-20 27-14-11-20 ETIM 3.0 eClass 4.1 eClass 6.0 35 mm² 8 kV 125 A 3 800 V 125 A IEC 60947-7-1 UL ratings data Certificate No. (UR) E60693VOL1SEC14 Current size C (UR) 100 A Conductor size Factory wiring min. (UR) 12 AWG Material data Insulating material Colour KrG V-0 System specifications Product family Connection direction Number of connections Levels cross-connected internally End cover plate required Screw connection 1 2 TS 32 Classifications ETIM 2.0 UNSPSC eClass 5.1 eClass 7.0 EC000897 27-14-11-20 27-14-11-20 Product information Descriptive text ordering data Descriptive text technical data Descriptive text accessories It is possible to use twin ferrules with identical rated voltages (LAB 13090). The tightening torque is 4.5 Nm for 16 - 50 mm² and AWG 6 - 2/7 stranded conductors. Twin wire end ferrules ZH 2.5 - ZH 16 can be used. If QIs are aligned side by side, then a TW/AP must be used. Approvals Approvals Creation date September 11, 2012 12:13:47 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 3