Product Overview NIMD6001A: Dual N-Channel MOSFET Driver with Diagnostic Output For complete documentation, see the data sheet Product Description NIMD6001N is a dual 3 Amp low side switch with an integrated common disable input and drain diagnostic output. Pulling the Disable pin low will override any applied gate voltages and turn off both FET switches. Should either Drain-Source voltage exceed approximately 50V, a logic 1 will be asserted on the Diagnostic/Feedback pin. Internal isolation diodes permit the Disable and Diagnostic/Feedback pins of multiple devices to be interconnected in a wired-OR configuration without additional components. Features • • • • • • • Benefits 110m Maximum RDSON at VGS=10V Avalanche Energy Specified Gate Drive Disable Input Drain-Source Voltage Diagnostic Feedback Output Electrically Isolated Drains Internal Resistors Limit Peak Transient Gate Current AEC-Q101 Qualified • • • • • • • Applications Low switching losses Inductive load rated Control flexibility Turn-off verification Low crosstalk Lower drive current Rated for automotive applications End Products • Injector Driver • Automobiles Part Electrical Specifications Product Compliance Status Channel Polarity V(BR)DSS Min (V) ID Typ (A) rDS(on) Max (mΩ) NIMD6001ANR2G AEC Qualified Active N-Channel 60 3 130 PPAP Capable Pb-free Halide free PD Max (W) Package Type SOIC-8 Application Diagram For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016