Final Product/Process Change Notification Document # : FPCN21114X Issue Date: 19 November 2015 Title of Change: Lead Change from Copper to Nickel plated for high voltage ultrafast devices in Axial package Proposed first ship date: 23 February 2016 Contact information: Contact your local ON Semiconductor Sales Office or Lim Say Meng <[email protected]> Samples: Contact your local ON Semiconductor Sales Office Additional Reliability Data: Contact your local ON Semiconductor Sales Office or Chean Ching Sim < [email protected]> Type of notification: This is a Final Product/Process Change Notification (FPCN) sent to customers. FPCNs are issued 90 days prior to implementation of the change. ON Semiconductor will consider this change accepted, unless an inquiry is made in writing within 30 days of delivery of this notice. To do so, contact <[email protected]>. Change Part Identification: There are no changes in the part numbers, case outline or marking. Change category: ☐ Wafer Fab ☒ Assembly Change Change Sub-Category(s): ☐ Manufacturing Site Change/Addition ☐ Manufacturing Process Change Sites Affected: ☐ All site(s) ☐ not applicable ☐ Test Change ☐ Other _______________ ☒ Material Change ☐ Product specific change ☐ Datasheet/Product Doc change ☐ Shipping/Packaging/Marking ☐ Other: _______________________ ☐ ON Semiconductor site(s) : ☐ External Foundry/Subcon site(s) Suzhou GoodArk Electronic Co Ltd Description and Purpose: This FPCN specify the change of Copper lead to Nickel plated lead for high voltage ultrafast devices in Axial package. This change will improve product robustness, without compromising the product performances of the affected devices. The exposed lead portion for soldering is remained as Copper thus does not affect solderability. There are no changes in the part numbers, case outline or marking. TEM001092 Rev. F Page 1 of 2 Final Product/Process Change Notification Document # : FPCN21114X Issue Date: 19 November 2015 Reliability Data Summary: QV DEVICE NAME: MUR2100ERLG PACKAGE: Axial pakcage Test Specification Condition Interval Results AC JESD22-A102 Ta =121°C, RH=100% 15 psig 96 hrs 0/240 TC JESD22-A104 Ta= -55°C to +150°C 1000 cyc 0/240 H3TRB JESD22-A101 85°C, 85% RH, 18.8psig, Bias = 80% rated V or 100V 1008 hrs 0/240 HTRB JESD22-A108 Ta= 85°C, 80% max rated V 1008 hrs 0/149 SD JSTD002 Ta = 245°C, 10 sec 0/ 45 Electrical Characteristic Summary: There are no changes in electrical characteristics. Product performance meets data sheet specifications. List of affected Standard Parts: TEM001092 Rev. F Part Number Qualification Vehicle MUR180EG MUR2100EG MUR180ERLG MUR2100EG MUR1100EG MUR2100EG MUR1100ERLG MUR2100EG MUR2100EG MUR2100EG MUR2100ERLG MUR2100EG Page 2 of 2