FINAL PRODUCT/PROCESS CHANGE NOTIFICATION Generic Copy 21-Feb-2007 SUBJECT: ON Semiconductor Final Product/Process Change Notification #15732 TITLE: Final PCN for Assembly Transfer of SC88 and SC88A in SBN to Leshan. PROPOSED FIRST SHIP DATE: 23-April-2007 AFFECTED CHANGE CATEGORY(S): ON Assemble Site AFFECTED PRODUCT DIVISION(S): Analog Switches FOR ANY QUESTIONS CONCERNING THIS NOTIFICATION: Contact your local ON Semiconductor Sales Office or Edwin Soto <[email protected]> SAMPLES: Contact your local ON Semiconductor Sales Office ADDITIONAL RELIABILITY DATA: Available Contact your local ON Semiconductor Sales Office or Laura Rivers <[email protected]> NOTIFICATION TYPE: Final Product/Process Change Notification (FPCN) Final change notification sent to customers. FPCNs are issued at least 60 days prior to implementation of the change. ON Semiconductor will consider this change approved unless specific conditions of acceptance are provided in writing within 30 days of receipt of this notice. To do so, contact your local ON Semiconductor Sales Office. DESCRIPTION AND PURPOSE: This is a Final Product Change Notice to make customers aware that the ON Semiconductor facility in Leshan, China has been qualified as a manufacturing source for the SC88 (SOT363) and SC88A (SOT353) packages. Leshan is an ISO 9001/QS9000 certified factory. Issue Date: 21-Feb-2007 Rev.07-02-05 Page 1 of 3 Final Product/Process Change Notification #15732 RELIABILITY DATA SUMMARY: NLAS4599DFT2G Reliability Report The product was assembled in ON LPS, Leshan China, using ON Semiconductor wafers. 3 qual lot and 1 control lot from device NLAS4599DFT2G were built, to provide distinct qualification information for assembly site transfer from SBN to LPS and die bond process from Epoxy changed to Eutectic. Reliability Test Results: Test HTOL HSTL Conditions TA=+150deg.C Initial 504 Hrs Results (Rej / SS) 0/84, 0/84, 0/84 0/84, 0/84, 0/84 TA=+150deg.C Initial 504 Hrs 1008 Hrs 0/84, 0/84, 0/84 0/84, 0/84, 0/84 0/84, 0/84, 0/84 PC 24 hours bake@125C+ 168hr, 85C/85%RH+ 3X IR @ 260 °C AC - PC 121°C/100% RH/15psig Post PC Electrical 96 Hrs 0/84, 0/84, 0/84 0/84, 0/84, 0/84 Ta=-65/+150deg.C, Air to air, Dwell = 10 min. Post PC Electrical 500 Cycles 0/84, 0/84, 0/84 0/84, 0/84, 0/84 Temp=+130deg.C; RH= 85%, 18.8psig. Post PC Electrical 96 Hrs 0/84, 0/84, 0/84 0/84, 0/84, 0/84 Post PC+TC500cys. End points 0/2, 0/2, 0/2 TC – PC HAST – PC DPA SAT 0/256, 0/256, 0/256 Check for delamination at initial and qual points. Pre MSL 0/5, 0/5, 0/5 Post MSL 0/5, 0/5, 0/5 ELECTRICAL CHARACTERISTIC SUMMARY: All product performance meets current datasheet specifications. Data is available upon request. CHANGED PART IDENTIFICATION: Product with a date code of WW17 may be manufactured at Leshan. Issue Date: 21-Feb-2007 Rev.07-02-05 Page 2 of 3 Final Product/Process Change Notification #15732 AFFECTED DEVICE LIST NLAS4599DFT2 NLAS4599DFT2G NLAST4599DFT2 NLAST4599DFT2G Issue Date: 21-Feb-2007 Rev.07-02-05 Page 3 of 3