8 6 7 THIS DRAWING IS THE PROPERTY OF ANALOG DEVICES INC. IT IS NOT TO BE REPRODUCED OR COPIED, IN WHOLE OR IN PART, OR USED IN FURNISHING INFORMATION TO OTHERS, OR FOR ANY OTHER PURPOSE DETRIMENTAL TO THE INTERESTS OF ANALOG DEVICES. 2 3 4 5 1 REVISIONS JUMPER TABLE REV JP# THE EQUIPMENT SHOWN HEREON MAY BE PROTECTED BY PATENTS OWNED OR CONTROLLED BY ANALOG DEVICES. ON DESCRIPTION DATE APPROVED OFF 1 2 3 RELAY CONTROL CHART D D 4 CONTROL CODE DEVICE FUNCTION CONNECTOR 5 * SEE ASSEMBLY INSTRUCTIONS C C B B TEMPLATE ENGINEER DATE HARDWARE SERVICES - HW TYPE : Customer Evaluation Product(s): AD9554-1 : N/A HARDWARE SYSTEMS TEST ENGINEER - A PACKAGE COMPONENT ENGINEER : PinCount-lead N/A Package-family : Pitch-pitch StyleVendor Style TEST PROCESS HARDWARE RELEASE - DESIGNER MASTER PROJECT TEMPLATE PTD ENGINEER UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES - TBD SOCKET OEM OEM PART# HANDLER 7 6 5 4 no_template DECIMALS X.XX +-0.010 X.XXX +-0.005 CHECKER - 8 TESTER TEMPLATE TOLERANCES <PTD_ENGINEER> BK/BD SPEC. A <User Define> <User Define> <User Define> - P.O SPEC. A N A LO G D EV C E S SCHEMATIC - 3 FRACTIONS +-1/32 ANGLES +-2 2 REV. DRAWING NO. A 02_037242 SIZE DD SCALE CODE ID NO. 1:1 CodeID SHEET 1 1 OF 8 8 6 7 2 3 4 5 1 REVISIONS REV DESCRIPTION DATE APPROVED D D BYPASS CAPACITORS MP6_DUT MP5_DUT LF_OPLL_2 LDO_OPLL_2 PAD 56 R104 55 54 53 52 51 50 49 R102 48 47 46 45 44 43 R100 LDO_OPLL_3 LF_OPLL_3 MP7_DUT XOA XOB 0.1UF 0.1UF 0.1UF GND 0.1UF C109 C110 0.1UF 0.1UF GND C107 GND C106 GND GND C105 0 0 C 0 GND C104 GND VDD_DUT C VDD_DUT PIN 3 PIN 7 PIN 8 PIN 12 PIN 15 PIN 16 0 15 16 17 18 19 20 21 22 23 24 25 26 27 28 OUT_0BN OUT_0BP R109 R111 0 0 REF_BN REF_BP MP1_DUT R113 0.1UF C120 0.1UF 0.1UF GND GND GND C118 GND 0.1UF C117 GND 0.1UF GND C116 C121 C122 0.1UF 0.1UF 0 OUT_1BN OUT_1BP PIN 19 PIN 23 PIN 28 PIN 27 C123 C125 R117 R4 SDIO/SDA_DUT SCLK/SCL_DUT CSB_DUT DVDD_DIG_2P5 RESETB_DUT LF_OPLL_1 LDO_OPLL_1 LDO_OPLL_0 LF_OPLL_0 R122 AD9554-1BCPZ 0 0 0 B MP2_DUT REF_CP REF_CN C115 PIN 31 PINS 35 PINS 36 0.1UF 0.1UF PIN 43 PIN 40 C126 0.1UF C127 0.1UF PIN 44 PIN 49 C128 GND R114 0 GND REF_AN REF_AP MP0_DUT R107 GND 0 0 OUT_2BP OUT_2BN GND R110 R112 42 41 40 39 38 37 36 35 34 33 32 31 30 29 GND MP3_DUT REF_DP REF_DN OUT2B OUT2B_N VDD M2 REFC REFC_N VDD VDD REFB_N REFB M1 VDD OUT1B_N OUT1B DVDD_DIG_2P5 0 OUT3B OUT3B_N VDD M3 REFD REFD_N VDD VDD REFA_N REFA M0 VDD OUT0B_N OUT0B GND R108 1 2 3 4 5 6 7 8 9 10 11 12 13 14 VDD VDD LDO_0 LF_0 VDD SDIO/SDA SCLK/SCL CS_N VDD_SP RESET_N LF_1 LDO_1 VDD VDD OUT_3BP OUT_3BN GND PAD VDD VDD LDO_3 LF_3 M7 XOA XOB VDD M6 M5 LF_2 LDO_2 VDD VDD U1 0.1UF PIN 55 B C129 0.1UF PINS 56 A A AN A LO G DE V CES THIS DRAWING IS THE PROPERTY OF ANALOG DEVICES INC. IT IS NOT TO BE REPRODUCED OR COPIED, IN WHOLE OR IN PART, OR USED IN FURNISHING INFORMATION TO OTHERS, SCHEMATIC HW TYPE : Customer Evaluation Product(s): AD9554-1 : N/A DESIGN VIEW REV DRAWING NO. <DESIGN_VIEW> A 02_037242 OR FOR ANY OTHER PURPOSE DETRIMENTAL TO THE INTERESTS OF ANALOG DEVICES. PTD ENGINEER THE EQUIPMENT SHOWN HEREON MAY BE PROTECTED BY PATENTS OWNED OR CONTROLLED BY OWNED ANALOG DEVICES. 8 7 6 5 4 3 <PTD_ENGINEER> 2 SIZE SCALE D 1:1 SHEET 1 2 OF 8 8 6 7 5 4 2 3 1 REVISIONS REV REFERENCE INPUTS R296 DNI 49.9 1 PRI T212 100 R253 100 C224 R286 1 SEC 4 3 MABA-007159-000000 GND J2 1 142-0701-851 R295 DNI 0 49.9 0.1UF GND J223 5 4 3 2 R6 R262 DNI R261 0 0.1UF OUT_0BP REF_AN R258 DNI 142-0701-851 5 OUT_0BN R263 0 0.1UF 0.1UF GND C223 DNI GND 0 REF_AP C205 49.9 R224 DNI C204 100 R236 2 3 4 5 0 R235 SEC 4 3 MABA-007159-000000 1 R257 DNI 49.9 0 1 PRI T201 1 J202 142-0701-201 5 GND DNI 142-0701-201 0 R201 J201 2 3 4 5 R234 DNI R204 DNI GND APPROVED CLOCK OUTPUTS GND GND DATE D 100 D DESCRIPTION 5 4 3 2 GND 0 GND GND GND 0 R238 DNI GND 0 0.1UF C218 100 R254 100 49.9 R247 0.1UF DNI R229 DNI R225 DNI 0 R202 0.1UF C201 OUT_1BN REF_BN 2 3 4 5 GND R244 SEC 100 T202 4 3 MABA-007159-000000 1 J204 DNI 142-0701-201 PRI 49.9 1 R232 REF_BP R283 5 1 PRI SEC 0 R5 1 T209 C217 100 5 0 C200 1 J1 0 49.9 142-0701-201 0 2 3 4 5 R237 DNI 49.9 C J203 R228 DNI GND R246 DNI R289 DNI R205 DNI 5 4 3 2 142-0701-851 DNI C GND GND 4 3 MABA-007159-000000 OUT_1BP J218 1 0.1UF 142-0701-851 GND 5 4 3 2 R287 DNI GND GND 0 GND 0 J205 3 B 0 GND R255 49.9 R226 DNI GND R242 MABA-007159-000000 DNI REF_CN 142-0701-201 5 1 PRI SEC OUT_2BN 0.1UF R260 DNI 0.1UF 100 4 0.1UF C212 T211 C219 100 SEC R264 T203 100 PRI R243 REF_CP C220 142-0701-851 5 4 3 2 4 3 MABA-007159-000000 OUT_2BP GND 0.1UF 0 GND R290 DNI 0 C202 0 REF_DP 100 C221 0 GND R240 DNI C222 OUT_3BP 0 100 R285 0.1UF 0.1UF 100 R256 R227 DNI 49.9 MABA-007159-000000 5 OUT_3BN REF_DN R231 GND 3 0.1UF C203 R245 4 DNI GND SEC 100 PRI R233 2 3 4 5 1 PRI T210 SEC 0 T204 DNI GND R291 1 5 4 3 2 GND 0 R239 DNI 49.9 5 R230 DNI J208 142-0701-201 0 B 142-0701-851 GND 1 J222 1 R294 DNI R223 DNI J221 1 0 1 100 5 R293 DNI 0 C211 R284 GND R259 DNI 49.9 0 R297 R241 DNI R222 DNI J219 1 5 4 3 2 4 3 MABA-007159-000000 142-0701-851 DNI GND J220 1 0.1UF 142-0701-851 5 4 3 2 R288 DNI GND 0 A A AN A LO G DE V CES THIS DRAWING IS THE PROPERTY OF ANALOG DEVICES INC. IT IS NOT TO BE REPRODUCED OR COPIED, IN WHOLE OR IN PART, OR USED IN FURNISHING INFORMATION TO OTHERS, SCHEMATIC HW TYPE : Customer Evaluation Product(s): AD9554-1 : N/A DESIGN VIEW REV DRAWING NO. <DESIGN_VIEW> A 02_037242 OR FOR ANY OTHER PURPOSE DETRIMENTAL TO THE INTERESTS OF ANALOG DEVICES. PTD ENGINEER THE EQUIPMENT SHOWN HEREON MAY BE PROTECTED BY PATENTS OWNED OR CONTROLLED BY OWNED ANALOG DEVICES. 8 7 6 5 4 3 <PTD_ENGINEER> 2 SIZE SCALE D 1:1 SHEET 1 3 OF 8 8 6 7 2 3 4 5 1 REVISIONS REV DESCRIPTION DATE APPROVED D D SYSCLK INPUT LF & LDO CONNECTIONS Y200 AND Y201 HAVE A COMMON FOOTPRINT 3.3V_TCXO GND 25MHZ 5 TCXO_P CAN USE VECTRON OR CONNOR WINFIELD TCXO VECTRON = YSML276W197H98 25MHZ 270 MABA-007159-000000 15000PF C322 VLDO2 1 WHT R315B 0 0.22UF LDO_OPLL_3 GND C324 0.22UF C312 100 R220 49.9 C309 R309B LDO_OPLL_2 DNI GND B VLDO3 1 WHT 0 XOB TSW-102-08-G-S GND 15PF R217 DNI C208 0 R1 NOTE: CAPS SHOULD BE CLOSEST TO THE PIN OF THE DUT R22 C210 0 DNI 0.1UF 0.1UF 49.9 2 4 CASE Y202 49.152MEGHZ 1 2 3 P12 3 15PF 1 P5 GND GND 1 2 DNI 49.9 R214 SAMTECTSW10608GS3PIN R215 GND XOA 1 2 3 P13 3 GND C308 0 DNI 1 2 4 GND4 1 WHT R216 SAMTECTSW10608GS3PIN 100 SEC VTUNE3 1 WHT 0 GND3 1 WHT 0 DNI 0.1UF DNI GND PRI 49.9 2 3 4 5 1 R213 142-0701-201 T200 VLDO1 1 WHT 0 R313B LF_OPLL_3 0 R23 0 DNI P4 TSW-102-08-G-S LF_OPLL_2 GND VTUNE2 1 WHT R304B 15000PF C207 5 GND C310 DNI 0.1UF TBD0402 C209 R210 R2 J200 1 LDO_OPLL_1 0 DNI R211 3.3V_TCXO B 26MEGHZ R316B GND DNI GND 2 0 DNI VCON CONWIN TCXO NC GND GND DNI 0 OUT LDO_OPLL_0 3 TCXO_P OUTPUT VLDO0 1 WHT 470 GND 8 TRI_STATE 10 R212 0 R209 DNI TCXO_EN 1 2 3 6 7 4 R208 DNI VCONT TCXO_EN R310B 0.22UF VCC 1 VCC C325 R1B DNI 3.3V_TCXO 0 DNI R2B GND 0.01UF Y1 4 DNI Y201 9 C GND DNI GND 3.3V_TCXO GND2 1 WHT GND 2 NDK TCXO GND 0.22UF C206 DNI DNI 3.3V_TCXO TCXO_P R218 0 3 C313 0 R207 OUTPUT 0 GND ENABLE C311 1 R219 GND R206 DNI DNI 3.3V_TCXO GND VTUNE1 1 WHT 15000PF 4 VCC LF_OPLL_1 C323 Y200 R314B GND1 1 WHT 15000PF C15B 0.1UF VECTRON TCXO VTUNE0 1 WHT 0 DNI DNI C LF_OPLL_0 3.3V_TCXO 3.3V_TCXO R305B 0 DNI GND A A AN A LO G DE V CES THIS DRAWING IS THE PROPERTY OF ANALOG DEVICES INC. IT IS NOT TO BE REPRODUCED OR COPIED, IN WHOLE OR IN PART, OR USED IN FURNISHING INFORMATION TO OTHERS, SCHEMATIC HW TYPE : Customer Evaluation Product(s): AD9554-1 : N/A DESIGN VIEW REV DRAWING NO. <DESIGN_VIEW> A 02_037242 OR FOR ANY OTHER PURPOSE DETRIMENTAL TO THE INTERESTS OF ANALOG DEVICES. PTD ENGINEER THE EQUIPMENT SHOWN HEREON MAY BE PROTECTED BY PATENTS OWNED OR CONTROLLED BY OWNED ANALOG DEVICES. 8 7 6 5 4 3 <PTD_ENGINEER> 2 SIZE SCALE D 1:1 SHEET 1 4 OF 8 8 6 7 2 3 4 5 1 REVISIONS REV USB SECTION CLK PIN: SELECTS I2C OR SPI SAMTECTSW10608GS3PIN SCL_U SDA_DUT P310 1 2 GND CSB_DUT SAMTECTSW10608GS3PIN 3.3V_USB GND C 150K INTERNAL PULLUP GND TSW-105-08-G-D GND XTALIN XTALOUT DPLUS DMINUS CLKOUT/T1OUT IFCLK/T0OUT CTL0/FLAGA CTL1/FLAGB CTL2/FLAGC 12 11 15 D+ 16 D5 20 36 SCLK_U 37 38 GND 12PF C306 12PF B 4 7 19 33 35 48 SCL_U SDA_USB 2.2K SCL SDA CY7C68013A-56PVXC USB CHIP RESET* WAKEUP RDY0/SLRD RDY1/SLWR RESERVED AGND RESETB_INT P406 1 2 RESETB_DUT DATA PIN: SELECTS I2C OR SPI SCLK/SCL_DUT 10 SDIO/SDA_DUT GND CSB_INT TSW-102-08-G-S P401 EEPROM ENA GND 1 2 GND CSB_INT RESETB_INT P311 1 2 P400 1 2 R400 1.1K SDA_USB 4 24LC32A-I/P GND R402 2.2K R401 VSS SCLK/SCL_INT SCLK/SCL_INT GND 10 14 3.3V_USB 22 23 49 51 8 9 21 VCC U300 24.000MEGHZ 3.3V_USB 100K 3.3V_USB WP P312 1 2 SDIO_INT C305 GND Y300 1 2 GND R307 C400 0.1UF SCL_U GND SML-LX1206IW-TR (RED) CR301 EN 2 3 4 5 6 7 8 9 11 ADG3308BRUZ C AVCC VCC 1 EEPROM A0 2 A1 3 5 A2 SDA 6 SCL 7 3.3V_USB A1 A2 A3 A4 A5 A6 A7 A8 GND 74LVC541APW 3.3V_USB Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 SAMTECTSW10608GS3PIN 3.3V_USB U400 R308 300 1 VCCY VCCA SELECTS MAN OR PC 100K 10UF 8 GND A R306 C302 B 19 SCLK/SCL_USB CSB_USB RESETB_USB 20 SDIO/SDA_INT SAMTECTSW10608GS3PIN C301 1UF GND SDIO_USB VCC I0 I1 I2 I3 I4 I5 I6 I7 O7 EN1_N EN2_N 1 MP5_USB MP6_USB MP7_USB 2.2UF 1 2 3 4 5 6 7 8 9 10 TSW-105-08-G-D 1 2 3 4 5 6 7 8 9 10 TSW-105-08-G-D MP2_USB MP3_USB 13 17 C MP5_USB MP5_INT MP6_USB MP6_INT MP7_USB MP7_INT U304 GND 18 SCLK_USB O0 17 SCL_USB O1 16 CSB_USB O2 15 RESETB_USB O3 14 USB_STATUS_USB O4 13 O5 12 O6 11 10 19 18 17 16 15 14 13 12 GND 10 9 8 7 6 5 4 3 2 1 P2 P1 MP0_USB MP0_INT MP1_USB MP1_INT MP2_USB MP2_INT MP3_USB MP3_INT U301B C318B 0.1UF P308 1MEG GND 1 2 3 R301 2 3 4 5 6 7 8 9 SCLK_U SCL_U CSB_U RESETB_U USB_STATUS_U GND C304B GND 20 C319B 0.1UF P306 4700PF C GND SDIO_USB 0.1UF CR300 SML-LX1206IW-TR (RED) C316 0.1UF TRI-STATE BUFFER LINE DRIVER USED TO BUFFER -USB_STATUS (FOR LED) -AND OTHER SIGNALS ONLY GOING FROM USB CHIP TO DUT VDD_COMM P301 1 2 3 C300 A 3.3V_USB 4-1734376-8 GND1 3.3V_USB 6 18 24 34 39 50 R300 750 DD+ C303B 2 3 6 3.3V_USB 1 4 5 VBUS P307 1 2 3 P300 3.3V_USB SCL_USB SCLK/SCL_USB SCLK_USB USB CONNECTOR USB_STATUS_U CSB_U RESETB_U MP0_USB MP1_USB P305 VDD_COMM 1 2 3 U300 CY7C68013A-56PVXC PA0/INT0* 40 PA1/INT1* 41 PA2/SLOE 42 PA3/WU2 43 PA4/FIFOADR0 44 PA5/FIFOADR1 45 PA6/PKTEND 46 PA7/FLAGD/SLCS* 47 PB0/FD0 25 PB1/FD1 26 PB2/FD2 27 PB3/TXD1/FD3 28 PB4/FD4 29 PB5/FD5 30 PB6/FD6 31 PB7/FD7 32 PD0/FD8 52 PD1/FD9 53 USB CHIP PD2/FD10 54 PD3/FD11 55 PD4/FD12 56 PD5/FD13 1 PD6/FD14 2 PD7/FD15 3 APPROVED DATE D 3.3V_USB D DESCRIPTION WRITE PROTECT GND P303 1 2 3 TSW-102-08-G-S I2C HEADER SAMTECTSW10608GS3PIN A A AN A LO G DE V CES THIS DRAWING IS THE PROPERTY OF ANALOG DEVICES INC. IT IS NOT TO BE REPRODUCED OR COPIED, IN WHOLE OR IN PART, OR USED IN FURNISHING INFORMATION TO OTHERS, SCHEMATIC HW TYPE : Customer Evaluation Product(s): AD9554-1 : N/A DESIGN VIEW REV DRAWING NO. <DESIGN_VIEW> A 02_037242 OR FOR ANY OTHER PURPOSE DETRIMENTAL TO THE INTERESTS OF ANALOG DEVICES. PTD ENGINEER THE EQUIPMENT SHOWN HEREON MAY BE PROTECTED BY PATENTS OWNED OR CONTROLLED BY OWNED ANALOG DEVICES. 8 7 6 5 4 3 <PTD_ENGINEER> 2 SIZE SCALE D 1:1 SHEET 1 5 OF 8 8 6 7 2 3 4 5 1 REVISIONS REV D 3.3V_TCXO DESCRIPTION DATE APPROVED D VDD_MPIN B GND 200K R405B MP5_INT MP6_INT MP7_INT 10K MP7 R438B GND MP0_INT MP1_INT MP2_INT 10K 10K GTL2003PW 300 R448 300 R447 300 R446 300 1 DS409 C A SML-LX1206GW-TR (GREEN) MP6_DUT VDD_MPIN 3.3V_TCXO MP7_DUT C402B 0.1UF GND 3.3V_TCXO VDD_MPIN MP5_DUT MP6_DUT MP7_DUT GND 3.3V_TCXO GND VCCA VCCB OE_N DIR A1 B1 A2 B2 A3 B3 A4 B4 A5 B5 A6 B6 A7 B7 A8 GND B8 11 12 13 GND 22 2 3 4 5 6 7 8 9 10 C401B 0.1UF MP5-MP9 U401B SN74LVC8T245PWR 21 20 19 18 17 16 15 14 7 DS402 SML-LX1206IW-TR (RED) C A GND 6 300 GND MP0 MP1 MP2 MP6 R437B R418B 10K R409B DREF D1 D2 D3 D4 D5 D6 D7 D8 GREF GND 10K MP5_DUT GND 5 P402 1 2 3 4 5 6 7 8 9 10 TSW-105-08-G-D B DS400 C A R436B R417B GND R404B SREF S1 S2 S3 S4 S5 S6 S7 S8 MP5 C SML-LX1206IW-TR (RED) 10K P404 R426B 1 2 0 3 R427B 4 5 0 6 R428B 7 8 0 9 10 11 12 13 14 15 TSW-105-08-G-T MP3_DUT 300 R416B 3.3V_USB VDD_MPIN MP5 MP6 MP7 10K VDD_MPIN GND C403B 0.1UF GND U402B MP3 R434B USB SIDE 10K DS408 C A 10K GND P405 1 2 3 4 5 6 7 8 9 10 TSW-105-08-G-D 0 SML-LX1206IW-TR (RED) R414B R408B R433B GTL2003PW C404B 0.1UF DUT SIDE MP2 GND MP2_DUT 1 DS403 C A 10K 10K 2 SML-LX1206GW-TR (GREEN) R413B 3 MP1_DUT 300 R432B 3.3V_USB GND MP1 DS407 SML-LX1206GW-TR (GREEN) C A 10K 10K R407B R412B GND MP0_DUT 21 20 19 18 17 16 15 14 R445 R431B GND VDD_MPIN MP0 U404B SN74LVC8T245PWR DS406 C A 10K P403 R421B 1 2 0 3 R422B 4 5 0 6 R423B 7 8 0 9 R424B 10 11 0 12 13 14 15 TSW-105-08-G-T MP0-MP5 11 12 13 R411B C315B 0.1UF SML-LX1206IW-TR (RED) 1 GND 23 24 C 19 18 MP3_INT 17 16 SDA_USB 15 GND 14 13 12 11 20 VDD_MPIN DREF D1 D2 D3 D4 D5 D6 D7 D8 GREF GND VCCA VCCB OE_N DIR A1 B1 A2 B2 A3 B3 A4 B4 A5 B5 A6 B6 A7 B7 A8 GND B8 0 SDA_DUT GND SREF S1 S2 S3 S4 S5 S6 S7 S8 0 2 3 4 5 6 7 8 9 10 VDD_MPIN MP3 USB SIDE DNI U403B 0 DUT SIDE 3.3V_USB VDD_MPIN MP0_DUT MP1_DUT MP2_DUT MP3_DUT 22 2 3 4 5 6 7 8 9 10 3.3V_TCXO GND 1 GND 200K R410B GND R442B C405B 0.1UF R403B C406B 0.1UF 0 3.3V_USB R441B VDD_MPIN DNI GND 23 24 C407B 0.1UF VDD_MPIN 3.3V_TCXO GND A A AN A LO G DE V CES THIS DRAWING IS THE PROPERTY OF ANALOG DEVICES INC. IT IS NOT TO BE REPRODUCED OR COPIED, IN WHOLE OR IN PART, OR USED IN FURNISHING INFORMATION TO OTHERS, SCHEMATIC HW TYPE : Customer Evaluation Product(s): AD9554-1 : N/A DESIGN VIEW REV DRAWING NO. <DESIGN_VIEW> A 02_037242 OR FOR ANY OTHER PURPOSE DETRIMENTAL TO THE INTERESTS OF ANALOG DEVICES. PTD ENGINEER THE EQUIPMENT SHOWN HEREON MAY BE PROTECTED BY PATENTS OWNED OR CONTROLLED BY OWNED ANALOG DEVICES. 8 7 6 5 4 3 <PTD_ENGINEER> 2 SIZE SCALE D 1:1 SHEET 1 6 OF 8 8 6 7 2 3 4 5 1 REVISIONS REV DESCRIPTION DATE APPROVED 1.5/1.8 V REGULATORS ADP7104 78.7K - 1.5V 78.7K+75K - 1.8V 78.7K+22.1K - 2.5V 0 OHM FEEDBACK RESISTOR - 1.22V D 3.3V REGULATORS VDD_TCXO C24 1 WHT U507 TSW-102-08-G-S PAD PAD 10UF ADP7104ACPZ-3.3-R7 GND P531 1 2 3 VDD_USB C25 1 WHT GND PI FILTER 1 2 0.1 P506 C 2 VDD_DUT 600OHM 1 UH FERRITE BEAD 1 1 C21 R7 10UF VDD_DUT 1 WHT E1 TP2 1 WHT TSW-102-08-G-S TP1 1 WHT GND TSW-102-08-G-S P11 1 2 GND5 1 WHT SAMTECTSW10608GS3PIN GND C 10UF 3.3V_USB R18 0 DNI BYPASS GND C559 100K GND GND P8 1 2 3 SAMTECTSW10608GS3PIN LDO_OUT R17 C556 10UF R542 GND 1UF P7 LDO_IN 1 SW_OUT 2 3 SAMTECTSW10608GS3PIN EN NC 3.3V_TCXO 7 PG 3 6 ADP1753 15K - 1.5V 15K+49.9K - 1.8V OUT-FB:30.9K, FB-GND:22.1K - 1.2V 1 VOUT P10 1 2 8 VIN 2 SENSE 5 6V_FILT 4 P501 GND 1 SW_OUT 2 Z5.530.3225.0 D C22 10UF GND VDD_MPIN 1 WHT 2.5 V REGULATORS GND 1 WHT GND 8 VIN 2 SENSE_ADJ 5 VOUT EN_UVLO 4 GND B GND TSW-102-08-G-S VDD_COMM 1 WHT C563 VDD_COMM B GND 1 2 R545 GND R543 100NF GND GND 75K 30K C19 12 11 10 9 ADJ1753 TSW-102-08-G-S R546 1 2 TSW-102-08-G-S 1 2 GND6 1 WHT 78.7K 30K P544 ADP1753ACPZ GND P6 ADJ1753 1 2 GND LDO_IN 49.9K 15K R14 R10 0.01UF R3 100K C17 GND A ADP7102ACPZ 22.1K R9 PAD 16 15 14 13 EN 5 6 7 8 LDO_IN 1 2 GND 3 SAMTECTSW10608GS3PIN U2 VOUT VOUT VOUT ADJ 10UF P535 P536 P533 R16 P3 1 VIN 2 VIN 3 VIN 4 GND PG GND SS NC LDO_IN PAD LDO_OUT LDO_IN PAD VIN VIN VOUT VOUT GND 7 DVDD_DIG_2P5 10UF TSW-102-08-G-S C507 10UF 1 SAMTECTSW10608GS3PIN C26 10UF GND DVDD_DIG_2P5 1 WHT C562 GND P532 1 2 3 GND LDO_IN GND PAD NC 3 6 C557 10UF PG C560 10UF 1 2 6V_FILT 1UF 18.2K GND 18.2K U508 GND R547 LDO7 - DIG 2.5 C23 10UF C558 R541 R544 100K TSW-102-08-G-S P9 1 2 VDD_MPIN TSW-102-08-G-S A GND AN A LO G DE V CES THIS DRAWING IS THE PROPERTY OF ANALOG DEVICES INC. IT IS NOT TO BE REPRODUCED OR COPIED, IN WHOLE OR IN PART, OR USED IN FURNISHING INFORMATION TO OTHERS, SCHEMATIC HW TYPE : Customer Evaluation Product(s): AD9554-1 : N/A DESIGN VIEW REV DRAWING NO. <DESIGN_VIEW> A 02_037242 OR FOR ANY OTHER PURPOSE DETRIMENTAL TO THE INTERESTS OF ANALOG DEVICES. PTD ENGINEER THE EQUIPMENT SHOWN HEREON MAY BE PROTECTED BY PATENTS OWNED OR CONTROLLED BY OWNED ANALOG DEVICES. 8 7 6 5 4 3 <PTD_ENGINEER> 2 SIZE SCALE D 1:1 SHEET 1 7 OF 8 8 6 7 2 3 4 5 1 REVISIONS REV DESCRIPTION DATE APPROVED D D DC TO DC STEP DOWN - 6V TO 3.3V 6V WALL WART CONNECTION L500 P500 1 2 3 C P PJ-102A N C500 470UF 4.7UF 1UH C501 C 6V_FILT 6VDC P N DC TO DC STEP DOWN C502 470UF C509 CR501 1 3 GND GND 1UF BAT54 8.5V OVER PROTECTION CIRCUIT C511 10 R523 10K 0 PV EN 19 FREQ 20 VREG C514 3 GND 15 1UF R503 11 0 SYNC R531 2 C526 10 100NF R512 2.21K 7 TRK 16 BST 14 SW 13 DH DL PGOOD CSL 8 SS 6 FB 17 C512 GND B IN COMP CLKSET CLKOUT L501 SW_OUT 33UH 18 C513 B R502 1K 33PF ADP1828ACPZ R602 2700PF TSW-102-08-G-S P600 SW_OUT_0 C515 200 2.7K R19 GND R508 SW_OUT_0 12 PAD 2 5 GND PGND PAD 4 1 9 0.01UF C508 3 2 1 2K 1 3 1 2 R507 C505 4.7UF C504 1UF 22UF Q504 MMBT3904 1 R514 C503 R532 DNI SI2316BDS-T1-E3 A P503 1 2 TSW-102-08-G-S SI2316BDS-T1-E3 3 Q500 C 6V_FILT U500 10 Q501 2 3300PF CR502 MMSZ4693T1G 1UF 17.4K R521 10K 0 R513 GND R510B C506 1UF 12.1K GND A A AN A LO G DE V CES THIS DRAWING IS THE PROPERTY OF ANALOG DEVICES INC. IT IS NOT TO BE REPRODUCED OR COPIED, IN WHOLE OR IN PART, OR USED IN FURNISHING INFORMATION TO OTHERS, SCHEMATIC HW TYPE : Customer Evaluation Product(s): AD9554-1 : N/A DESIGN VIEW REV DRAWING NO. <DESIGN_VIEW> A 02_037242 OR FOR ANY OTHER PURPOSE DETRIMENTAL TO THE INTERESTS OF ANALOG DEVICES. PTD ENGINEER THE EQUIPMENT SHOWN HEREON MAY BE PROTECTED BY PATENTS OWNED OR CONTROLLED BY OWNED ANALOG DEVICES. 8 7 6 5 4 3 <PTD_ENGINEER> 2 SIZE SCALE D 1:1 SHEET 1 8 OF 8