6 5 4 3 2 1 REVISIONS C14 J16 OUTP1 R68 100PF 49.9 DEPOP J17 D R18 R16 150 0 0 R19 R69 49.9 DEPOP R17 C13 150 OUTN1 C38 R70 100PF 49.9 DEPOP J19 150 R24 R71 49.9 DEPOP R22 C15 150 OUTN2 ZONE A CP150808 ----- DESCRIPTION NAME DATE BILL LAHEY/M.LYONS PRODUCTION RELEASE 0 DEPOP C1 07/16/2015 R23 R21 0 OUTN0 R12 0 0 R15 C37 150 49.9 DEPOP R13 R83 0 C39 R82 R11 0 100PF DEPOP 49.9 DEPOP OUTP0 C2 150 R25 D J10 R14 C16 OUTP2 ECN# R20 100PF J18 REV J11 100PF 0 DEPOP 100PF A OUTN3 0 R2 0 C40 J5 R26 DUT_VCC 28 C21 100PF 49.9 DEPOP J25 R38 150 0 R37 R77 49.9 DEPOP R39 C22 150 OUTN5 J27 OUTP6 150 0 R44 R79 C23 150 OUTN6 C43 15 16 OUTP1 17 OUTN1 VCCC 0 share pads in layout to minimize stub 13 C5 12 10 100PF 9 8 DUT_VCC 0 DEPOP 2 HMC6832ALP5LE R66 2 J30 C27 J2 0 R54 J3 C3 INP0 0 100PF 49.9 DEPOP J28 150 R49 R81 49.9 DEPOP R47 R45 0 C25 150 OUTN7 R46 0 0 C44 49.9 J12 J1 R60 R52 R50 C8 C7 C10 0.1UF 100PF J13 49.9 INP1 0 R62 R61 0 49.9 * Place one 100pF and one 0.1uF caps as close as possible to each power pin DUT_VCC 100PF DEPOP 0 INN1 0 C4 R48 R64 B C26 R80 R65 R51 100PF OUTP7 J15 49.9 share pads in layout to minimize stub 3 100PF J29 R63 100NF 100PF DEPOP INN0 1 0 DEPOP 0 100PF 3 0 R41 C6 R67 U1 480-HMC6832ALP5LE-00 J14 R53 11 VCC_CORE 1 R43 18 INP0 C24 R42 OUTP2 19 OUTN6 R40 R36 OUTN2 INN0 DUT_VCC 100PF 49.9 DEPOP J26 DEPOP OUTP6 100PF R78 49.9 DEPOP C42 CONFIG GND R76 OUTN5 1 OUTP5 OUTP0 14 TLW-103-05-T-S 27 OUTP5 INN1 26 OUTN0 6 25 OUTN4 INP1 DEPOP GND 5 24 20 21 23 100PF J24 3. The board is to be laid out in an octagonal shape 100NF OUTP4 IN_SEL OUTN4 22 0 OUTN7 150 C41 4 C19 R35 OUTP3 0 0 3 J23 150 R34 R75 49.9 DEPOP R33 OUTP7 100PF 49.9 DEPOP R32 J4 C9 0.1UF C11 100PF TITLE C12 0 DRAWING #: DRAWN BY HMC6832XLP5LE 3 2 SHEET 130-00712-00 ADAN LOPEZ-MARTINEZ 4 A SCH, EV1 HMC6832XLP5LE 0.1UF PROJECT 5 2 Elizabeth Drive Chelmsford, MA 01824 ANALOG DEVICES 100PF 6 C C28 R31 OUTN3 R74 3 0 DUT_VCC 2 OUTP4 2 2 R3 C20 J22 1 CONFIG/NC/VAC_REF0 1 100PF 2. Functionality of pin 18 is as follows: - HMC6832ALP5LE: Pin 11 = CONFIG - HMC6832BLP5LE: Pin 11 = N/C - HMC6832CLP5LE: Pin 11 = VAC_REF0 DEPOP 640452-2 0 DEPOP 10K DEPOP TLW-103-05-T-S 150 R30 1. This board supports the following parts: - HMC6832ALP5LE - HMC6832BLP5LE - HMC6832CLP5LE VCCB C18 R28 VAC_REF1 J20 150 R27 R73 49.9 DEPOP R29 TLW-103-05-T-S B 100PF 49.9 DEPOP NOTICE OF PROPRIETARY PROPERTY: THIS DOCUMENT AND THE INFORMATION CONTAINED IN IT ARE THE PROPRIETARY PROPERTY OF ANALOG DEVICES. IT MAY NOT BE COPIED OR USED IN ANY MANNER NOR MAY ANY OF THE INFORMATION IN OR UPON IT BE USED FOR ANY PURPOSE WITHOUT THE EXPRESSED WRITTEN CONSENT OF AN AUTHORIZED AGENT OF ANALOG DEVICES. C R72 7 OUTP3 * NOTES: DUT_VCC C17 J21 DATE 1 CODE ID NO. 1CN88 11/28/2012 1 OF 2 SIZE REV C 16/07/2015:18:41 A 4 3 2 1 INSTALL J8 AND REMOVE J9 TO USE REGULATOR REMOVE J8 AND INSTALL J9 TO USE EXTERNAL SUPPLY 500X_TP B B TP1 R56 34K 2 * JUMPER INSTALLED, VR = 2.5V * JUMPER REMOVED (DEFAULT), VR = 3.3V C33 500X_TP +3P3V/+2.5V R55 47.5K J6 0.1UF 1 TP3 640452-2 640452-2 C35 10UF 0.1UF NC 14 NC 13 10K C29 1 4.7UF 2 3 DEPOP C30 C32 J7 4.7UF 1 4.7UF REF 400 BAND GAP VR NC VRX NC 7 NC 8 NC R57 RD U2 NC 5 HV 6 NC 2 4 EN C34 100NF 12 11 10 R58 1 0 9 C31 2 DUT_VCC J8 640452-2 0.1UF HMC976LP3E NC C36 NC 16 VDD 15 R59 2 J9 TP2 +5V TP4 1 640452-2 A A * JUMPER INSTALLED, REGULATOR DISABLED * JUMPER REMOVED (DEFAULT), REGULATOR ENABLED ANALOG DEVICES TITLE SCH, EV1 HMC6832XLP5LE PROJECT HMC6832XLP5LE DRAWING #: SHEET 130-00712-00 DRAWN BY ADAN LOPEZ-MARTINEZ 4 3 2 2 Elizabeth Drive Chelmsford, MA 01824 1 DATE CODE ID NO. 11/28/2012 1CN88 2 OF SIZE 2 REV B A 14/07/2015:14:43