Product Overview MC100EP16VB: Differential Driver / Receiver with High and Low Gain For complete documentation, see the data sheet Product Description The EP16VB is a world-class differential receiver/driver. The device is functionally equivalent to the EP16 and LVEP16 devices but with both high and low gain outputs. QHG and QHGbar outputs have a DC gain several times larger than the DC gain of an EP16. Qbar output is provided for feedback purposes. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01µF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open. Special considerations are required for differential inputs under No Signal conditions to prevent instability. The 100 Series contains temperature compensation. Features • • • • • • 300 ps Typical Propagation Delay Gain > 200 Maximum Frequency > 3 GHz Typical PECL Mode Operating Range: VCC = 3.0 V to 5.5 V with VEE = 0 V NECL Mode Operating Range: VCC = 0 V with VEE = –3.0 V to –5.5 V VBB Output Part Electrical Specifications Product Compliance Status Type Chann els Input / Input Output Level Ratio Output VCC Level Typ (V) tJitterR MS Typ (ps) tskew(oo) Max (ps) tpd Typ (ns) tR & tF Max (ps) fmaxClo fmaxDat Packa ck Typ a Typ ge (MHz) (Mbps) Type MC100EP16VBDR2G Pb-free Active Signal Driver 1 1:2 ECL 0.2 20 0.3 400 3000 SOIC8 Signal Driver 1 0.2 20 0.3 400 3000 TSSO P-8 Signal Driver 1 0.2 20 0.3 400 3000 TSSO P-8 Halide free MC100EP16VBDTG Pb-free Active Halide free MC100EP16VBDTR2 G Pb-free Halide free Active ECL CML 1:2 CML 5 ECL ECL 1:2 ECL CML 3.3 5 3.3 ECL 5 3.3 For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016