Analog, Mixed Signal and Power Management MC33982 Single Intelligent High-current Self-protected Silicon High Side Switch (2.0 mOhm) Applications • • • • • • MC33982 Simplified Application Drawing Aircraft and marine systems Automotive and robotic systems Farm equipment Industrial actuator controls Lamp and inductive load controls DC motor control applications requiring diagnostics VDD VDD VDD VPWR 33982 VPWR VDD I/O FS Overview I/O WAKE The MC33982 is a self-protected silicon 2.0 mΩ high side switch used to replace electromechanical relays, fuses and discrete devices in power management applications. The MC33982 is designed for harsh environments and includes selfrecovery features. The device is suitable for loads with high inrush current, as well as motors and all types of resistive and inductive loads. SO SI SCLK MCU GND SCLK CS CS SI SO I/O RST I/O IN HS LOAD A/D CSNS FSI GND Programming, control and diagnostics are implemented via the serial peripheral interface (SPI). A dedicated parallel input is available for alternate and pulse-width modulation (PWM) control of the output. SPI programmable fault trip thresholds allow the device to be adjusted for optimal performance in the application. The MC33982 is packaged in a powerenhanced 12 x 12 mm non-leaded PQFN package with exposed tabs. GND PWR GND Performance Typical Values Outputs 1 RDSON at 25 °C 1.7 mΩ Operating Voltage 6.0 - 27 V Peak Current 150 A PWM Input Control 150 Hz / 1.0 kHz ESD ± 2000 V Ambient Operating Temperature -40 °C ≤ TA ≤ 125 °C Junction Operating Temperature -40 °C ≤ TJ ≤ 150 °C Features Protection • Single 2.0 mΩ max high side switch with parallel input or SPI control Protection • 6.0 to 27 V operating voltage with standby currents < 5.0 μA Over-voltage • • Under-voltage • • • Over-current / SC • • • • SPI control of over-current limit, overcurrent fault blanking time, output OFF open load detection, output ON/OFF control, watchdog timeout, slew-rates, and fault status reporting Open Load • • Output Current • • Over-temperature • • • SPI status reporting of over-current, open and shorted loads, over-temperature shutdown, under-voltage, over-voltage shutdown, fail-safe pin status, and program status Short-to-Ground • • \ • Output current monitoring with two SPIselectable current ratios • Enhanced -16 V reverse polarity VPWR protection Benefits • Offers an economical high current switch requiring few external parts and is simple to hook up • Can be used with microprocessors having SPI in high side switching applications • High-efficiency, low ON resistance switching Detect Shut Down Auto Retry Status Reporting • • • • • Ordering Information Device (for Tape and Reel, add an R2 suffix) MC33982CHFK Temperature range (TA) Package -40 °C ≤ TA ≤ 125 °C 16 PQFN Development Tools Part Number Description KIT33982CEVBE Evaluation Kit - 33982, Single 2 mΩ Intelligent High-current Self-protected Silicon High Side Switch Documentation Document Number Title Description MC33982 Data Sheet • Reduced PC board space resulting in enhanced application reliability and lower costs Single intelligent high-current self-protected silicon high side switch (2.0 mΩ) SG1002 Selector Guide Analog Product Selector Guide • Numerous internal protection and programmable performance features SG187 Selector Guide Automotive Product Selector Guide AN2467 Application Note Power Quad Flat No-lead Package AN3274 Application Note eXtreme Switch Protection Guidelines • Output internally clamped to -20 V for inductive load switching applications Questions • Do you need a high side switch capable of typically switching 150 A? • Do you need a micro controller-controlled high side switch with a programmable watchdog to monitor the MCU? (Bottom View) 16 PQFN 98ARL10521D • Do you have limited PC board space available for load control? • Do you need an easy-to-design high side switch with internal charge pump capable of low-speed PWM switching with a dedicated parallel input? Learn More: F or current inform ation about Freescale products, please vi sit www.freescale.com. . Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat & Tm. Off. SMARTMOS is a trademark of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc., 2009-2012. All rights reserved. Document Number: MC33982FS Rev 7.0