MC33988FS, Dual intelligent high-current self-protected silicon high side switch (8.0 mOhm) - Fact Sheet

Analog, Mixed Signal and Power Management
MC33988
Dual Intelligent High-current Self-protected Silicon High Side Switch (8.0 mOhm)
Applications
MC33988 Simplified Application Drawing
• Aircraft and marine systems
•
•
•
•
•
Automotive and robotic systems
Farm equipment
Industrial actuator controls
Lamp and inductive load controls
DC motor control applications
requiring diagnostics
• Applications where high side switch
control is required
VDD
VDD
VPWR
33988
VPWR
VDD
Overview
The MC33988 is a dual self-protected
8.0 mΩ silicon switch used to replace
electromechanical relays, fuses, and
discrete devices in power management
applications. The MC33988 is designed for
harsh environments, and it includes selfrecovery features. The device is suitable
for loads with high inrush current, as well
as motors and all types of resistive and
inductive loads.
Programming, control and diagnostics
are implemented via the serial peripheral
Interface (SPI). A dedicated parallel input
is available for alternate and pulse-width
modulation (PWM) control of each output.
SPI-programmable fault trip thresholds
allow the device to be adjusted for optimal
performance in the application.
The MC33988 is packaged in a powerenhanced 12 x 12 mm nonleaded PQFN
package with exposed tabs.
VDD
FS
I/O
WAKE
SO
SI
SCLK
MCU
GND
I/O
SCLK
CS
CS
SI
SO
I/O
RST
I/O
INO
I/O
IN1
A/D
HS1
HS0
LOAD
LOAD
CSNS
FSI
GND
Performance
Typical Values
Outputs
2
RDSON at 25 °C
7.0 mΩ
Operating Voltage
6.0 - 27 V
Peak Current
50 A
PWM Input Control
150 Hz / 1.0 kHz
ESD
± 2000 V
Ambient Operating Temperature
-40 °C ≤ TA ≤ 125 °C
Junction Operating Temperature
-40 °C ≤ TJ ≤ 150 °C
Features
Protection
• Dual 8.0 mΩ max high side switch with
parallel input or SPI control
• 6.0 to 27 V operating voltage with standby
currents < 5.0 μA
• Output current monitoring with two SPIselectable current ratios
• SPI control of over-current limit, overcurrent fault blanking time, output OFF
open load detection, output ON/OFF
control, watchdog timeout, slew-rates, and
fault status reporting
• SPI status reporting of over-current, open
and shorted loads, over-temperature,
under-voltage and over-voltage shutdown,
fail-safe pin status, and program status
• Enhanced -16 V reverse polarity VPWR
protection
Protection
Benefits
MC33988CHFK
• Offers an economical high-current switch
requiring few external parts and is simple
to hook up
Development Tools
Detect
Shut Down
Auto Retry
Status Reporting
Over-voltage
•
•
•
•
Under-voltage
•
•
•
Over-current / SC
•
•
•
Open Load
•
•
Output Current
•
•
Over-temperature
•
•
Short-to-Ground
•
•
•
•
•
Ordering Information
Device
Temperature range (TA)
(for Tape and Reel,
add an R2 suffix)
Package
-40 ≤ TA ≤ 125 °C
16 PQFN
Part Number
Description
• Can be used with micro processors having
SPI in high side switching applications
KIT33988CEVBE
Evaluation Kit - 33988, Dual 8mΩ Intelligent High-current
Self-protected Silicon High Side Switch
• High efficiency, low ON resistance
switching
Documentation
• Reduced PC board space resulting in
enhanced application reliability and lower
costs
• Numerous internal protection and
programmable performance features
• Output internally clamped to -17 V for
inductive load switching applications
• Two integrated high-power switches in the
same solution
Document Number
Title
Description
MC33988
Data Sheet
Dual intelligent high-current
self-protected silicon high side switch
(8.0 mΩ)
SG1002
Selector Guide
Analog Product Selector Guide
SG187
Selector Guide
Automotive Product Selector Guide
AN2467
Application Note
Power Quad Flat No-lead Package
AN3274
Application Note
eXtreme Switch Protection Guidelines
Questions
• Need a dual high side switch capable of
switching 50 A per output?
• Need a micro controller-controlled high
side switch with a programmable watchdog
to monitor the MCU?
• Do you have limited PC board space
available for load control?
(Bottom View)
16 PQFN
98ARL10521D
• Need an easy-to-design high side switch
with internal charge pump capable of low
speed PWM switching with a dedicated
parallel input?
Learn More: F or current inform ation about Fre esca le produ cts,
please
vi sit information
www.freescale.com.
Learn More: For
current
about Freescale products,
please visit www.freescale.com.
Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat & Tm. Off.
SMARTMOS is a trademark of Freescale Semiconductor, Inc. All other product or service names are the property
of their respective owners. © Freescale Semiconductor, Inc., 2009-2012. All rights reserved.
Document Number: MC33988FS
Rev 9.0