Product Overview NBSG16VS: SiGe Differential Driver / Receiver with Variable Output Swing For complete documentation, see the data sheet Product Description The NBSG16VS is a differential receiver/driver targeted for high frequency applications that require variable output swing. The device is functionally equivalent to the EP16VS device with much higher bandwidth and lower EMI capabilities. This device may be used for applications driving VCSEL lasers. </bR>Inputs incorporate internal 50-ohm termination resistors and accept NECL (Negative ECL), PECL (Positive ECL), LVTTL, LVCMOS, CML, or LVDS. The output amplitude is varied by applying a voltage to the VCTRL input pin. Outputs are variable swing ECL from 100 mV to 750 mV amplitude, optimized for operation from VCC - VEE = 3.0 V to 3.465 V. </bR>The VBB and VMM pins are internally generated voltage supplies available to this device only. The VBB is used as a reference voltage for single-ended NECL or PECL inputs and the VMM pin is used as a reference voltage for LVCMOS inputs. For single-ended input operation, the unused complementary differential input is connected to VBB or VMM as a switching reference voltage. VBB or VMM may also rebias AC coupled inputs. When used, decouple VBB and VMM via a 0.01 5F capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB and VMM outputs should be left open. Features • • • • • • • • • • Maximum Input Clock Frequency up to 12 GHz Typical Maximum Input Data Rate up to 12 Gb/s Typical 40 ps Typical Rise and Fall Times (VCTRL = VCC - 1 V) Compatible with Existing 2.5 V/3.3 V EP Devices 120 ps Typical Propagation Delay (VCTRL = VCC - 1 V) Variable Swing PECL Output with Operating Range: VCC = 2.375 V to 3.465 V with VEE = 0 V Variable Swing NECL Output with NECL Inputs with Operating Range: VCC = 0 V with VEE = -2.375 V to -3.465 V Output Level (100 mV to 750 mV Peak-to-Peak Output; VCC - VEE = 3.0 V to 3.465 V), Differential Output Only 50 Ω Internal Input Termination Resistors VBB and VMM Reference Voltage Output For more features, see the data sheet End Products Part Electrical Specifications Product Compliance Status Type Chann els Input / Input Output Level Ratio Output VCC Level Typ (V) tJitterR MS Typ (ps) NBSG16VSMNG Pb-free Active Signal Driver 1 1:1 RSEC L 3.3 0.5 RSEC L 2.5 RSEC L 3.3 Halide free LVD S 2.5 tskew(oo) Max (ps) tpd Typ (ns) tR & tF Max (ps) fmaxClo fmaxDat Packa ck Typ a Typ ge (MHz) (Mbps) Type 0.125 55 12000 12000 QFN16 55 12000 12000 QFN16 55 12000 12000 QFN16 0.135 ECL CML CMO S TTL NBSG16VSMNHTBG Pb-free Active Halide free Signal Driver 1 1:1 CML ECL 0.5 3.3 0.135 0.125 TTL LVD S CMO S NBSG16VSMNR2G Pb-free Halide free Active Signal Driver 1 1:1 CML ECL TTL LVD S CMO S 2.5 0.5 0.135 0.125 For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016