Product Overview NBSG16M: Multilevel Input to CML Clock/Data Receiver/ Driver/Translator Buffer For complete documentation, see the data sheet Product Description The NBSG16M is a differential current mode logic (CML) receiver/driver. The device is functionally equivalent to the EP16, LVEP16, or SG16 devices with CML output structure and lower EMI capabilities. Inputs incorporate internal 50 Ω termination resistors and accept NECL (Negative ECL), PECL (Positive ECL), LVTTL, LVCMOS, CML, or LVDS. The CML output structure contains internal 50 Ω source termination resistor to VCC. The device generates 400 mV output amplitude with 50 Ω receiver resistor to VCC. The VBB pin is internally generated voltage supply available to this device only. For all single?ended input conditions, the unused complementary differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB via a 0.01 µF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB output should be left open. Features • • • • • • • • • • Maximum Input Clock Frequency > 10 GHz Typical Maximum Input Data Rate > 10 Gb/s Typical 120 ps Typical Propagation Delay 35 ps Typical Rise and Fall Times Positive CML Output with Operating Range: VCC = 2.375 V to 3.465 V with VEE = 0 V Negative CML Output with RSNECL or NECL Inputs with Operating Range: VCC = 0 V with VEE = -2.375 V to -3.465 V CML Output Level; 400 mV Peak-to-Peak Output with 50 _ Receiver Resistor to VCC 50 Ω Internal Input and Output Termination Resistors Compatible with Existing 2.5 V/3.3 V LVEP, EP, LVEL and SG Devices VBB Reference Voltage Output For more features, see the data sheet Applications • • • • Backplane buffering OC-3 through OC-192 clock or data distribution/driver Gigabit Ethernet clock or data driver Fibre Channel distribution/driver Part Electrical Specifications Product Compliance Status Type Chann els Input / Input Output Level Ratio Output VCC Level Typ (V) tJitterR MS Typ (ps) NBSG16MMNG Pb-free Active Signal Driver 1 1:1 CML Halide free LVD S 2.5 tskew(oo) Max (ps) tpd Typ (ns) tR & tF Max (ps) fmaxClo fmaxDat Packa ck Typ a Typ ge (MHz) (Mbps) Type 0.2 0.12 53 10000 10000 QFN16 0.2 0.12 53 10000 10000 QFN16 3.3 CMO S CML ECL TTL NBSG16MMNR2G Pb-free Halide free Active Signal Driver 1 1:1 CMO S CML 3.3 2.5 LVD S CML ECL TTL For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016