Product Overview MC100EP16F: Differential Driver / Receiver With Reduced Output Swing For complete documentation, see the data sheet Product Description The MC100EP16F is a differential receiver/driver. The device is functionally equivalent to the EP16 device with higher performance capabilities. With reduced output swings, rise/fall transition times are significantly faster than on the EP16. The EP16F is ideally suited for interfacing with high frequency sources. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 uF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open. Features • • • • • • 100 ps Typical Rise and Fall Time Max Frequency >4 GHz PECL Mode Operating Range: VCC= 3.0 V to 5.5 V with VEE = 0 V NECL Mode Operating Range: VCC= 0V with VEE = -3.0 V to -5.5 V Open Input Default State Safety Clamp on Inputs Part Electrical Specifications Product Compliance Status Type Chann els Input / Input Output Level Ratio Output VCC Level Typ (V) tJitterR MS Typ (ps) tskew(oo) Max (ps) tpd Typ (ns) tR & tF Max (ps) fmaxClo fmaxDat Packa ck Typ a Typ ge (MHz) (Mbps) Type MC100EP16FDG Pb-free Active Signal Driver 1 1:1 RSEC L 3.3 0.2 20 0.22 110 4000 SOIC8 Signal Driver 1 RSEC L 3.3 0.2 20 0.22 110 4000 SOIC8 Signal Driver 1 RSEC L 5 0.2 20 0.22 110 4000 TSSO P-8 Signal Driver 1 RSEC L 3.3 0.2 20 0.22 110 4000 TSSO P-8 Halide free MC100EP16FDR2G Pb-free Active Halide free MC100EP16FDTG Pb-free Active Halide free MC100EP16FDTR2G Pb-free Halide free Active CML ECL 1:1 CML ECL 1:1 CML ECL 1:1 ECL CML 5 5 3.3 5 For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016