VISHAY EGL34A

BYM07-50 thru BYM07-400, EGL34A thru EGL34G
Vishay General Semiconductor
Surface Mount Glass Passivated Ultrafast Rectifier
FEATURES
• Superectifier structure for high reliability condition
• Cavity-free glass-passivated junction
SUPERECTIFIER®
• Ideal for automated placement
• Ultrafast reverse recovery time
• Low switching losses, high efficiency
• Meets environmental standard MIL-S-19500
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
DO-213AA (GL34)
• AEC-Q101 qualified
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
TYPICAL APPLICATIONS
For use in high frequency rectification and freewheeling
application in switching mode converters and inverters for
consumer, computer, automotive and telecommunication.
PRIMARY CHARACTERISTICS
IF(AV)
0.5 A
VRRM
50 V to 400 V
IFSM
10 A
trr
50 ns
VF
1.25 V, 1.35 V
TJ max.
175 °C
MECHANICAL DATA
Case: DO-213AA, molded epoxy over glass body
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: Two bands indicate cathode end - 1st band
denotes device type and 2nd band denotes repetitive peak
reverse voltage rating
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL BYM07-50 BYM07-100 BYM07-150 BYM07-200 BYM07-300 BYM07-400 UNIT
Fast efficient device: 1st band is green
Polarity color bands (2nd band)
EGL34A
EGL34B
EGL34C
EGL34D
EGL34F
EGL34G
Gray
Red
Pink
Orange
Brown
Yellow
100
150
200
300
400
V
Maximum repetitive peak reverse
voltage
VRRM
50
Maximum RMS voltage
VRMS
35
70
105
140
210
280
V
Maximum DC blocking voltage
VDC
50
100
150
200
300
400
V
Maximum average forward rectified
current at TT = 75 °C
IF(AV)
0.5
A
Peak forward surge current 8.3 ms single
half sine-wave superimposed
on rated load
IFSM
10
A
Maximum full load reverse current, full
cycle average at TA = 55 °C
IR(AV)
50
μA
TJ, TSTG
- 65 to + 175
°C
Operating junction and storage
temperature range
Document Number: 88580
Revision: 15-Mar-11
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
1
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BYM07-50 thru BYM07-400, EGL34A thru EGL34G
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
BYM07-50 BYM07-100 BYM07-150 BYM07-200 BYM07-300 BYM07-400
TEST
SYMBOL
UNIT
CONDITIONS
EGL34A
EGL34B
EGL34C
EGL34D
EGL34F
EGL34G
PARAMETER
Maximum DC reverse
current at rated DC
blocking voltage
TA = 25 °C
5.0
IR (1)
μA
TA = 125 °C
50
Maximum
instantaneous forward
voltage
0.5 A
Max. reverse
recovery time
IF = 0.5 A,
IR = 1.0 A,
Irr = 0.25 A
trr
50
ns
Typical junction
capacitance
4.0 V, 1 MHz
CJ
7.0
pF
VF (1)
1.25
1.35
V
Note
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Maximum thermal resistance
BYM07-50 BYM07-100 BYM07-150 BYM07-200 BYM07-300 BYM07-400
EGL34A
EGL34B
EGL34C
EGL34D
RJA (1)
150
RJT (2)
70
EGL34F
EGL34G
UNIT
°C/W
Notes
Thermal resistance from junction to ambient, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal
(2) Thermal resistance from junction to terminal, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal
(1)
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
EGL34D-E3/98
0.036
98
2500
7" diameter plastic tape and reel
EGL34D-E3/83
0.036
83
9000
13" diameter plastic tape and reel
EGL34DHE3/98 (1)
0.036
98
2500
7" diameter plastic tape and reel
EGL34DHE3/83 (1)
0.036
83
9000
13" diameter plastic tape and reel
Note
AEC-Q101 qualified
(1)
RATINGS AND CHARACTERISTICS CURVES
12
0.5
Peak Forward Surge Current (A)
Average Forward Rectified Current (A)
(TA = 25 C unless otherwise noted)
0.4
0.3
0.2
Resistive or Inductive Load
0.1
0
TJ = TJ Max.
8.3 ms Single Half Sine-Wave
10
8
6
4
2
0
0
25
50
75
100
125
150
175
1
10
100
Terminal Temperature (°C)
Number of Cycles at 60 Hz
Fig. 1 - Forward Current Derating Curve
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
www.vishay.com
2
For technical questions within your region, please contact one of the following:
Document Number: 88580
[email protected], [email protected], [email protected]
Revision: 15-Mar-11
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BYM07-50 thru BYM07-400, EGL34A thru EGL34G
Vishay General Semiconductor
35
Pulse Width = 300 µs
1 % Duty Cycle
10
TJ = 150 °C
1
TJ = 25 °C
0.1
20
15
10
0
0.4
0.6
1.2
1.0
0.8
1.4
1.6
0.1
2.0
1.8
1
100
10
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 5 - Typical Junction Capacitance
100
Transient Thermal Impedance (°C/W)
100
Instantaneous Reverse Leakage
Current (µA)
25
5
EGL34A thru EGL34D
EGL34F and EGL34G
0.01
0.2
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
30
Junction Capacitance (pF)
Instantaneous Forward Current (A)
100
10
TJ = 150 °C
1
TJ = 125 °C
0.1
TJ = 75 °C
0.01
TJ = 25 °C
0.001
0
20
40
60
1
0.1
0.01
100
80
10
0.1
1
10
100
Percent of Rated Peak Reverse Voltage (%)
t - Pulse Duration (s)
Fig. 4 - Typical Reverse Characteristics
Fig. 6 - Typical Transient Thermal Impedance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-213AA (GL34)
Solderable Ends
Mounting Pad Layout
1st BAND
2nd BAND
0.066 (1.676)
0.060 (1.524)
0.079 (2.0)
MIN.
D1 =
D2
0.079 (2.0)
MAX.
0.049 (1.25)
MIN.
0.022 (0.559)
0.016 (0.406)
D2 = D1
+0
- 0.008 (0.20)
0.177 (4.5) REF.
0.145 (3.683)
0.131 (3.327)
1st band denotes type and polarity
2nd band denotes voltage type
Document Number: 88580
Revision: 15-Mar-11
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
3
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1