BYM07-50 thru BYM07-400, EGL34A thru EGL34G Vishay General Semiconductor Surface Mount Glass Passivated Ultrafast Rectifier FEATURES • Cavity-free glass-passivated junction • Ideal for automated placement • Ultrafast reverse recovery time • Low switching losses, high efficiency ® • Meets environmental standard MIL-S-19500 • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC d* e t n e Pat *Glass-plastic encapsulation is covered by Patent No. 3,996,602, brazed-lead assembly to Patent No. 3,930,306 DO-213AA (GL34) TYPICAL APPLICATIONS For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer, automotive and telecommunication. PRIMARY CHARACTERISTICS IF(AV) 0.5 A VRRM 50 V to 400 V IFSM 10 A trr 50 ns VF 1.25 V, 1.35 V TJ max. 175 °C MECHANICAL DATA Case: DO-213AA, molded epoxy over glass body Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC-Q101 qualified), meets JESD 201 class 2 whisker test Polarity: Two bands indicate cathode end - 1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL BYM07-50 BYM07-100 BYM07-150 BYM07-200 BYM07-300 BYM07-400 UNIT st Fast efficient device: 1 band is green Polarity color bands (2nd band) EGL34A EGL34B EGL34C EGL34D EGL34F EGL34G Gray Red Pink Orange Brown Yellow Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 V Maximum RMS voltage VRMS 35 70 105 140 210 280 V Maximum DC blocking voltage VDC 50 100 150 200 300 400 V Maximum average forward rectified current at TT = 75 °C IF(AV) 0.5 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 10 A Maximum full load reverse current, full cycle average at TA = 55 °C IR(AV) 50 µA TJ, TSTG - 65 to + 175 °C Operating junction and storage temperature range www.vishay.com 628 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88580 Revision: 27-Aug-08 BYM07-50 thru BYM07-400, EGL34A thru EGL34G Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) BYM07-50 BYM07-100 BYM07-150 BYM07-200 BYM07-300 BYM07-400 TEST SYMBOL UNIT CONDITIONS EGL34A EGL34B EGL34C EGL34D EGL34F EGL34G PARAMETER Maximum DC reverse current at rated DC blocking voltage (1) TA = 25 °C TA = 125 °C IR Maximum instantaneous forward voltage (1) 0.5 A VF Max. reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 50 ns Typical junction capacitance 4.0 V, 1 MHz CJ 7.0 pF 5.0 50 µA 1.25 1.35 V Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL BYM07-50 BYM07-100 BYM07-150 BYM07-200 BYM07-300 BYM07-400 EGL34A EGL34B EGL34C RθJA RθJT Maximum thermal resistance (1)(2) EGL34D EGL34F EGL34G 150 70 UNIT °C/W Notes: (1) Thermal resistance from junction to ambient, 0.24 x 0.24" (6.0 x 6.0 mm) copper pads to each terminal (2) Thermal resistance from junction to terminal, 0.24 x 0.24" (6.0 x 6.0 mm) copper pads to each terminal ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE EGL34D-E3/98 0.036 98 2500 7" diameter plastic tape and reel EGL34D-E3/83 0.036 83 9000 13" diameter plastic tape and reel EGL34DHE3/98 (1) 0.036 98 2500 7" diameter plastic tape and reel EGL34DHE3/83 (1) 0.036 83 9000 13" diameter plastic tape and reel Note: (1) Automotive grade AEC-Q101 qualified 12 0.5 Peak Forward Surge Current (A) Average Forward Rectified Current (A) RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 0.4 0.3 0.2 Resistive or Inductive Load 0.1 0 TJ = TJ Max. 8.3 ms Single Half Sine-Wave 10 8 6 4 2 0 0 25 50 75 100 125 150 175 1 10 100 Terminal Temperature (°C) Number of Cycles at 60 Hz Figure 1. Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Document Number: 88580 Revision: 27-Aug-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 629 BYM07-50 thru BYM07-400, EGL34A thru EGL34G Vishay General Semiconductor 35 Pulse Width = 300 µs 1 % Duty Cycle 10 TJ = 150 °C 1 TJ = 25 °C 0.1 20 15 10 0 0.4 0.6 0.8 1.2 1.0 1.4 1.6 1.8 0.1 2.0 1 100 10 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance 100 100 Transient Thermal Impedance (°C/W) Instantaneous Reverse Leakage Current (µA) 25 5 EGL34A - EGL34D EGL34F & EGL34G 0.01 0.2 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 30 Junction Capacitance (pF) Instantaneous Forward Current (A) 100 10 TJ = 150 °C 1 TJ = 125 °C 0.1 TJ = 75 °C 0.01 TJ = 25 °C 0.001 20 0 40 60 80 10 1 0.1 0.01 100 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Figure 4. Typical Reverse Characteristics Figure 6. Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-213AA (GL34) Solderable Ends Mounting Pad Layout 1st BAND 2nd BAND 0.066 (1.676) 0.060 (1.524) 0.079 (2.0) MAX. 0.079 (2.0) MIN. D1 = D2 0.049 (1.25) MIN. 0.022 (0.559) 0.016 (0.406) D2 = D1 +0 - 0.008 (0.20) 0.177 (4.5) REF. 0.145 (3.683) 0.131 (3.327) 1st band denotes type and polarity 2nd band denotes voltage type www.vishay.com 630 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88580 Revision: 27-Aug-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1