PHILIPS SA602

RF COMMUNICATIONS PRODUCTS
SA612A
Double-balanced mixer and oscillator
Product specification
Replaces data of September 17, 1990
IC17 Data Handbook
Philips Semiconductors
1997 Nov 07
Philips Semiconductors
Product specification
Double-balanced mixer and oscillator
DESCRIPTION
SA612A
PIN CONFIGURATION
The SA612A is a low-power VHF monolithic double-balanced mixer
with on-board oscillator and voltage regulator. It is intended for low
cost, low power communication systems with signal frequencies to
500MHz and local oscillator frequencies as high as 200MHz. The
mixer is a “Gilbert cell” multiplier configuration which provides gain
of 14dB or more at 45MHz.
D, N Packages
The oscillator can be configured for a crystal, a tuned tank
operation, or as a buffer for an external L.O. Noise figure at 45MHz
is typically below 6dB and makes the device well suited for high
performance cordless phone/cellular radio. The low power
consumption makes the SA612A excellent for battery operated
equipment. Networking and other communications products can
benefit from very low radiated energy levels within systems. The
SA612A is available in an 8-lead dual in-line plastic package and an
8-lead SO (surface mounted miniature package).
INPUT A 1
8
VCC
INPUT B 2
7
OSCILLATOR
GND 3
6
OSCILLATOR
OUTPUT A 4
5
OUTPUT B
SR00098
Figure 1. Pin Configuration
APPLICATIONS
• Cordless telephone
• Portable radio
• VHF transceivers
• RF data links
• Sonabuoys
• Communications receivers
• Broadband LANs
• HF and VHF frequency conversion
• Cellular radio mixer/oscillator
FEATURES
• Low current consumption
• Low cost
• Operation to 500MHz
• Low radiated energy
• Low external parts count; suitable for crystal/ceramic filter
• Excellent sensitivity, gain, and noise figure
ORDERING INFORMATION
TEMPERATURE RANGE
ORDER CODE
DWG #
8-Pin Plastic Dual In-Line Plastic (DIP)
DESCRIPTION
-40 to +85°C
SA612AN
SOT97-1
8-Pin Plastic Small Outline (SO) package (Surface-Mount)
-40 to +85°C
SA612AD
SOT96-1
BLOCK DIAGRAM
8
7
6
5
V CC
OSCILLATOR
VOLTAGE
REGULATOR
GROUND
1
2
3
4
SR00099
Figure 2. Block Diagram
1997 Nov 07
2
853-0391 18662
Philips Semiconductors
Product specification
Double-balanced mixer and oscillator
SA612A
ABSOLUTE MAXIMUM RATINGS
SYMBOL
PARAMETER
RATING
UNIT
VCC
Maximum operating voltage
9
V
TSTG
Storage temperature
-65 to +150
°C
TA
Operating ambient temperature range SA612A
-40 to +85
°C
AC/DC ELECTRICAL CHARACTERISTICS
TA=25°C, VCC = 6V, Figure 3
SYMBOL
VCC
PARAMETER
TEST CONDITION
Power supply voltage range
LIMITS
Min
Typ
4.5
Max
8.0
V
DC current drain
2.4
fIN
Input signal frequency
500
MHz
fOSC
Oscillator frequency
200
MHz
Noise figured at 45MHz
5.0
dB
-13
dBm
Third-order intercept point at 45MHz
RFIN=-45dBm
Conversion gain at 45MHz
14
RIN
RF input resistance
1.5
CIN
RF input capacitance
Mixer output resistance
(Pin 4 or 5)
mA
dB
kΩ
3
pF
1.5
kΩ
radio 2nd IF and demodulator, the SA612A is capable of receiving
-119dBm signals with a 12dB S/N ratio. Third-order intercept is
typically -15dBm (that’s approximately +5dBm output intercept
because of the RF gain). The system designer must be cognizant of
this large signal limitation. When designing LANs or other closed
systems where transmission levels are high, and small-signal or
signal-to-noise issues not critical, the input to the SA612A should be
appropriately scaled.
DESCRIPTION OF OPERATION
The SA612A is a Gilbert cell, an oscillator/buffer, and a temperature
compensated bias network as shown in the equivalent circuit. The
Gilbert cell is a differential amplifier (Pins 1 and 2) which drives a
balanced switching cell. The differential input stage provides gain
and determines the noise figure and signal handling performance of
the system.
The SA612A is designed for optimum low power performance.
When used with the SA614A as a 45MHz cordless phone/cellular
1997 Nov 07
17
3.0
UNIT
3
Philips Semiconductors
Product specification
Double-balanced mixer and oscillator
SA612A
TEST CONFIGURATION
0.5 to 1.3µH
22pF
1nF
5.5µH
34.545MHz THIRD OVERTONE CRYSTAL
10pF
VCC
100nF
6.8µF
10nF
8
7
6
5
150pF
OUTPUT
1.5 to
44.2µH
612A
330pF
1
2
3
120pF
4
47pF
0.209 to
0.283µH
INPUT
220pF
100nF
SR00101
Figure 3. Test Configuration
8
VCC
18k
BUFFER
6
7
1.5k
1.5k
4
5
25k
BIAS
BIAS
2
1
BIAS
1.5k
1.5k
3
GND
SR00102
Figure 4. Equivalent Circuit
1997 Nov 07
4
Philips Semiconductors
Product specification
Double-balanced mixer and oscillator
SA612A
external signal can be injected at Pin 6 through a DC blocking
capacitor. External L.O. should be 200mVP-P minimum to 300mVP-P
maximum.
Besides excellent low power performance well into VHF, the
SA612A is designed to be flexible. The input, output, and oscillator
ports can support a variety of configurations provided the designer
understands certain constraints, which will be explained here.
Figure 7 shows several proven oscillator circuits. Figure 7a is
appropriate for cordless phones/cellular radio. In this circuit a third
overtone parallel-mode crystal with approximately 5pF load
capacitance should be specified. Capacitor C3 and inductor L1 act
as a fundamental trap. In fundamental mode oscillation the trap is
omitted.
The RF inputs (Pins 1 and 2) are biased internally. They are
symmetrical. The equivalent AC input impedance is approximately
1.5k || 3pF through 50MHz. Pins 1 and 2 can be used
interchangeably, but they should not be DC biased externally. Figure
5 shows three typical input configurations.
The mixer outputs (Pins 4 and 5) are also internally biased. Each
output is connected to the internal positive supply by a 1.5kΩ
resistor. This permits direct output termination yet allows for
balanced output as well. Figure 6 shows three single-ended output
configurations and a balanced output.
Figure 8 shows a Colpitts varacter tuned tank oscillator suitable for
synthesizer-controlled applications. It is important to buffer the
output of this circuit to assure that switching spikes from the first
counter or prescaler do not end up in the oscillator spectrum. The
dual-gate MOSFET provides optimum isolation with low current.
The FET offers good isolation, simplicity, and low current, while the
bipolar circuits provide the simple solution for non-critical
applications. The resistive divider in the emitter-follower circuit
should be chosen to provide the minimum input signal which will
assume correct system operation.
The oscillator is capable of sustaining oscillation beyond 200MHz in
crystal or tuned tank configurations. The upper limit of operation is
determined by tank “Q” and required drive levels. The higher the Q
of the tank or the smaller the required drive, the higher the
permissible oscillation frequency. If the required L.O. is beyond
oscillation limits, or the system calls for an external L.O., the
612A
612A
612A
1
2
1
2
1
INPUT
a. Single-Ended Tuned Input
b. Balanced Input (For Attenuation
of Second-Order Products)
2
c. Single-Ended Untuned Input
SR00103
Figure 5. Input Configuration
1997 Nov 07
5
Philips Semiconductors
Product specification
Double-balanced mixer and oscillator
SA612A
CT*
12pF
5
5
CFU455
or Equivalent
612A
612A
Filter K&L 38780 or Equivalent
*CT matches 3.5kΩ to next stage
4
4
a. Single-Ended Ceramic Filter
b. Single-Ended Crystal Filter
5
5
612A
612A
4
4
c. Single-Ended IFT
d.. Balanced Output
SR00104
Figure 6. Output Configuration
L1
C2
C3
XTAL
8
7
C1
6
5
8
7
2
5
8
7
612A
612A
1
6
3
4
1
2
5
612A
3
TC02101S
a. Colpitts Crystal Oscillator
(Overtone Mode)
6
4
1
TC02111S
b. Colpitts L/C Tank Oscillator
2
3
4
TC02121S
c. Hartley L/C Tank Oscillator
SR00105
Figure 7. Oscillator Circuits
1997 Nov 07
6
Philips Semiconductors
Product specification
Double-balanced mixer and oscillator
SA612A
5.5µH
+6V
10µF
0.10pF
1
0.1µF
8
2
TO
BUFFER
7
612A
10pF
7pF
3
6
4
5
1000pF
DC CONTROL VOLTAGE
FROM SYNTHESIZER
1000pF
0.06µH
MV2105
OR EQUIVALENT
0.01µF
100k
2k
3SK126
2N918
0.01pF
2N5484
2pF
TO SYNTHESIZER
330
100k
100k
0.01µF
TO SYNTHESIZER
1.0nF
SR00106
Figure 8. Colpitts Oscillator Suitable for Synthesizer Applications and Typical Buffers
1997 Nov 07
7
Philips Semiconductors
Product specification
Double-balanced mixer and oscillator
SA612A
TEST CONFIGURATION
0.5 to 1.3µH
22pF
44.545MHz THIRD OVERTONE CRYSTAL
5.5µH
6.8µF
5.6pF
1nF
VCC
100nF
10nF
8
7
6
5
3
4
612A
1
2
SFG455A3
OR EQUIVALENT
455kHZ
47pF
0.209 to 0.283µH
INPUT
45MHz IN
220pF
100nF
SR00107
Figure 9. Typical Application for Cordless/Cellular Radio
1997 Nov 07
8
Philips Semiconductors
Product specification
SA612A
3.50
6.00
3.25
5.75
NOISE FIGURE (dB)
SUPPLY CURRENT 9mA)
Double-balanced mixer and oscillator
8.5V
3.00
6.0V
2.75
4.5V
2.50
2.25
4.5V
6.0V
8.5V
5.50
5.25
5.00
4.75
2.00
4.50
1.75
4.25
4.00
–40 –30 –20 –10
1.50
–40 –30 –20 –10
0 10 20 30 40
TEMPERATURE OC
50
60 70
0
80 90
10 20 30 40 50
TEMPERATURE OC
60 70
80 90
SR00111
SR00108
Figure 10. ICC vs Supply Voltage
Figure 13. Noise Figure
RF1 = 45MHz, IF = 455kHz, RF2 = 45.06MHz
20.0
3rd ORDER PRODUCT
19.5
20
18.5
6.0V
8.5V
4.5V
18.0
17.5
17.0
IF OUTPUT POWER (dBm)
CONVERSION GAIN (dB)
19.0
16.5
16.0
15.5
15.0
14.5
14.0
–40 –30 –20 –10
0
10
20
30 40
50
60
70
80
0
–20
FUND. PRODUCT
–40
–60
90
TEMPERATURE OC
SR00109
–80
–60
–40
–20
0
RF INPUT LEVEL (dBm)
Figure 11. Conversion Gain vs Supply Voltage
20
SR00112
Figure 14. Third-Order Intercept and Compression
–10.0
–11.0
–11.5
–10
–12.0
–11
–12.5
–12
INTERCEPT (dBm)
INPUT INTERCEPT POINT (dBm)
–10.5
–13.0
–13.5
–14.0
–14.5
–15.0
–15.5
–13
–14
–15
–16
–16.0
–17
–16.5
–17.0
–40 –30 –20 –10
0
10
20
30
40
50
60 70
80
–18
90
TEMPERATURE OC
SR00110
4
5
6
7
VCC (VOLTS)
Figure 12. Third-Order Intercept Point
8
9
10
SR00113
Figure 15. Input Third-Order Intermod Point vs VCC
1997 Nov 07
9
Philips Semiconductors
Product specification
Double-balanced mixer oscillator
SA612
SO8: plastic small outline package; 8 leads; body width 3.9mm
1997 Nov 07
10
SOT96-1
Philips Semiconductors
Product specification
Double-balanced mixer oscillator
SA612
DIP8: plastic dual in-line package; 8 leads (300 mil)
1997 Nov 07
SOT97-1
11
Philips Semiconductors
Product specification
Double-balanced mixer oscillator
SA612
DEFINITIONS
Data Sheet Identification
Product Status
Definition
Objective Specification
Formative or in Design
This data sheet contains the design target or goal specifications for product development. Specifications
may change in any manner without notice.
Preliminary Specification
Preproduction Product
This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips
Semiconductors reserves the right to make changes at any time without notice in order to improve design
and supply the best possible product.
Product Specification
Full Production
This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes
at any time without notice, in order to improve design and supply the best possible product.
Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products,
including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips
Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright,
or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes
only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing
or modification.
LIFE SUPPORT APPLICATIONS
Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appliances, devices,
or systems where malfunction of a Philips Semiconductors and Philips Electronics North America Corporation Product can reasonably be expected
to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips
Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully
indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale.
 Copyright Philips Electronics North America Corporation 1997
All rights reserved. Printed in U.S.A.
Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409
Sunnyvale, California 94088–3409
Telephone 800-234-7381
1997 Nov 07
12