Philips Semiconductors Linear Products Product specification Dual high-performance operational amplifier DESCRIPTION NE/SA/SE5512 PIN CONFIGURATIONS The 5512 series of high-performance operational amplifiers provides very good input characteristics. These amplifiers feature low input bias and voltage characteristics such as a 108 op amp with improved CMRR and a high differential input voltage limit achieved through the use of a bias cancellation and PNP input circuits with collector-to-emitter clamping. The output characteristics are like those of a 741 op amp with improved slew rate and drive capability, yet have low supply quiescent current. N Package OUTPUT 1 1 8 V+ -INPUT 1 2 7 OUTPUT 2 +INPUT 1 3 6 -INPUT 2 V- 4 5 +INPUT 2 8 -INPUT 1 7 OUTPUT 1 6 V+ 5 OUTPUT 2 TOP VIEW APPLICATIONS D Package1 • AC amplifiers • RC active filters • Transducer amplifiers • DC gain block • Battery operation • Instrumentation amplifiers + INPUT 1 1 V- 2 +INPUT 2 3 -INPUT 2 4 1 2 TOP VIEW NOTE: 1. The D package pinout is not functionally identical to the N pinout. FEATURES • High input impedance 100MΩ • High PSRR 110dB • High differential input voltage limit • No crossover distortion • Indefinite output short circuit protection • Internally-compensated for unity gain • 600Ω drive capability • MIL-STD processing available • Low input bias < ±20nA • Low input offset current < ±20nA • Low input offset voltage <1mV • Low VOS temperature drift 5µV/°C • Low input bias temperature drift 40pA/°C • Low input voltage noise 30nV/√Hz • Low supply current 1.5mA/amp • High slew rate 1.0V/µs • High CMRR 100dB ORDERING INFORMATION TEMPERATURE RANGE ORDER CODE DWG # 8-Pin Plastic Small Outline (SO) Package DESCRIPTION 0 to 70°C NE5512D 0174C 8-Pin Plastic Dual In-Line Package (DIP) 0 to 70°C NE5512N 0404B 8-Pin Plastic Small Outline (SO) Package -40 to +85°C SA5512D 0174C 8-Pin Plastic Dual In-Line Package (DIP) -40 to +85°C SA5512N 0404B 8-Pin Plastic Dual In-Line Package (DIP) -55 to +125°C SE5512N 0404B August 31, 1994 78 853-0948 13721 Philips Semiconductors Linear Products Product specification Dual high-performance operational amplifier NE/SA/SE5512 ABSOLUTE MAXIMUM RATINGS SYMBOL PARAMETER RATING UNIT ±16 V N package 1212 mW D package 800 mW NE5512 0 to +70 °C SA5512 -40 to +85 °C SE5512 -55 to +125 °C -65 to +150 °C 300 °C VCC Supply voltage PD MAX Maximum power dissipation, TA=25°C (still air)1 TA Operating ambient temperature range TSTG Storage temperature range TSOLD Lead soldering temperature (10sec max) NOTES: 1. The following derating factors should be applied above 25°C N package at 9.7mW/°C D package at 6.4mW/°C August 31, 1994 79 Philips Semiconductors Linear Products Product specification Dual high-performance operational amplifier NE/SA/SE5512 ELECTRICAL PERFORMANCE CHARACTERISTICS VCC = ±15V, TA = 25°C over temperature range, unless otherwise specified. SYMBOL VOS PARAMETER TEST CONDITIONS SE5512 Min VCM CMRR 2 3 Typ Max 1 1.5 5 6 UNIT Input offset current RS=100kΩ TA=+25°C Over temp. Input bias current RS=100kΩ TA=+25°C Over temp. 3 4 30 40 pA/°C Input resistance differential TA=+25°C 100 100 MΩ Input common mode range TA=+25°C Over temp. 4 3 4 10 20 6 8 20 30 40 10 20 6 8 mV µV/°C 5 30 ∆IBIAS/∆T RIN 0.7 1 Min RS=100Ω TA=+25°C Over temp. ∆IOS/∆T IBIAS Max Input offset voltage ∆VOS/∆T IOS NE/SA5512 Typ nA pA/°C 20 30 nA ±13.5 ±13 ±13.7 ±13.2 ±13.5 ±13 ±13.7 ±13.2 V 70 100 70 100 dB VO=±10V over temp. 50 25 200 50 25 200 V/mV 0.6 1 1 V/µs VCC=±15V VIN=±13.5V Input common-mode rejection ratio TA=+25°C VIN=±13V Over temp. RL=2kΩ TA=25°C AV Large-signal voltage gain SR Slew rate TA=25°C GBW Small-signal unity gain bandwidth TA=25°C 3 3 MHz θM Phase margin TA=25°C 45 45 degree VOUT Output voltage swing RL=2kΩ TA=25°C Over temp. VOUT Output voltage swing RL=600Ω1 TA=25°C Over temp. ICC Power supply current RL=Open TA=25°C Over temp. PSRR Power supply rejection ratio AA Amplifier-to-amplifier coupling THD Total harmonic distortion VNOISE ±13 ±12.5 ±13.5 ±13 ±13 ±12.5 ±13.5 ±13 V ±10 ±7.5 ±11.5 ±9 ±10 ±8 ±11.5 ±9 V 3.4 3.6 Over temp. 80 f=1kHz to 20kHz, TA=25°C 100 5 5.5 3.4 3.6 80 100 5 5.5 mA dB dB -120 -120 f=10kHz TA=25°C VO=7VRMS 0.01 0.01 % Input noise voltage f=1kHz TA=25°C 30 30 nV/√Hz INOISE Input noise current f=1kHz TA=25°C 0.2 0.2 pA/√Hz ISC Short-circuit current ±15V, TA=25°C 40 40 mA NOTES: 1. Not to exceed maximum package power dissipation. August 31, 1994 80 Philips Semiconductors Linear Products Product specification Dual high-performance operational amplifier NE/SA/SE5512 EQUIVALENT SCHEMATIC (ONE OP AMP) V+ -VIN +VIN OUTPUT -V August 31, 1994 81