Package Dimensions (H) MLPM Package 6-Pin D e D/2 b L R E/2 L3 L4 EXPOSED PAD (OPTIONAL) E PIN 1 MARK AREA (SEE NOTE 1) PIN NO. 1 L2 TOP VIEW L1 D2 BOTTOM VIEW L2 E2 NOTE 2 PIN NO. 1 S A2 A Note 2: If L1 Max is not called out, the metalized feature will extend to the exposed pad. Thus L4 does not apply. A3 SIDE VIEW A1 SYMBOL DESIG A A1 A2 A3 b D D2 E E2 e L L1 L2 L3 L4 R S Note 1: Details of pin #1 are optional, but must be located within the zone indicated. The identifier may be molded, marked or metalized features. 6-PIN 3x3 MIN 0.80 0.00 0.65 0.15 0.33 1.92 1.11 0.20 0.16 --0.17 0.17 08 NOM MAX 0.90 1.00 0.025 0.05 0.70 0.75 0.20 0.25 0.35 0.43 3.00 BSC 2.02 2.12 3.00 BSC 1.21 1.31 0.95 0.29 0.45 0.24 0.40 --0.125 --0.30 ----0.127 REF 108 128 NOTE: ALL MEASUREMENTS ARE IN MILLIMETERS. www.irf.com