Product Specification PE4134 High Linearity Quad MOSFET Mixer for PCS & 3G BTS Product Description The PE4134 is a high linearity, passive Quad MOSFET Mixer for PCS & 3G Base Station Receivers, exhibiting high dynamic range performance over a broad LO drive range of up to +20 dBm. This mixer integrates passive matching networks to provide single-ended interfaces for the RF and LO ports, eliminating the need for external RF baluns or matching networks. The PE4134 is optimized for frequency down-conversion using low-side LO injection for PCS & 3G Base Station applications, and is also suitable for up-conversion applications. The PE4134 is manufactured on Peregrine’s UltraCMOS™ process, a patented variation of silicon-on-insulator (SOI) technology on a sapphire substrate, offering the performance of GaAs with the economy and integration of conventional CMOS. Figure 1. Functional Diagram Features • Integrated, single-ended RF & LO interfaces • High linearity: IIP3 >+31 dBm, 1.9 GHz (+17 dBm LO) • Low-conversion loss: 7.4 dB (+17 dBm LO) • High isolation: Typical LO-IF at 33 dB, LO-RF at 31 dB • Optimized for low-side LO injection • Packaged in a 6-lead 3x3 mm DFN Figure 2. Package Type 6-lead 3x3 mm DFN LO 180o Two-Way Power Divider RF 180o Two-Way Power Divider IF Table 1. AC and DC Electrical Specifications @ +25 °C Parameter Frequency Range: LO RF IF1 Minimum Typical Maximum Units 1540 1800 -- --260 1740 2000 -- MHz MHz MHz 7.4 8.0 dB Conversion Loss2 Isolation: LO-RF LO-IF Input IP3 1.8 GHz 1.9 GHz 2.0 GHz 27 27 31 33 dB dB 26 31 28 29 33 31 dBm dBm dBm 22 dBm Input 1 dB Compression Notes: 1. An IF frequency of 260 MHz is a nominal frequency. The IF frequency can be specified by the user as long as the RF and LO frequencies are within the specified maximum and minimum. 2. Conversion Loss includes loss of IF transformer (M/A COM ETK4-2T, nominal loss 0.7 dB at 260 MHz). *Test conditions unless otherwise noted: IF = 260 MHz, LO input drive = 17 dBm, RF input drive = 3 dBm. Document No. 70-0087-03 │ www.psemi.com ©2006 Peregrine Semiconductor Corp. All rights reserved. Page 1 of 9 PE4134 Product Specification Figure 3. Pin Configuration (Top View) IF1 GND LO 1 6 2 5 3 PE4134 4 Pin Name 1 IF1 GND RF Description IF differential output Ground connections for Mixer. Traces should be physically short and connect immediately to ground plane for best performance. The exposed solder pad must also be soldered to the ground plane for best performance. 2 GND 3 LO LO Input 4 RF RF Input 5 GND 6 IF2 Ground connections for Mixer. Traces should be physically short and connect immediately to ground plane for best performance. The exposed solder pad must also be soldered to the ground plane for best performance. Parameter/Conditions Min Max Units TST Storage temperature range -65 150 °C TOP Operating temperature range -40 85 °C PLO LO input power 20 dBm PRF RF input power 12 dBm VESD ESD Sensitive Device 250 V Absolute Maximum Ratings are those values listed in the above table. Exceeding these values may cause permanent device damage. Functional operation should be restricted to the limits in the DC Electrical Specifications table. Exposure to absolute maximum ratings for extended periods may affect device reliability. Electrostatic Discharge (ESD) Precautions When handling this UltraCMOS™ device, observe the same precautions that you would use with other ESD-sensitive devices. Although this device contains circuitry to protect it from damage due to ESD, precautions should be taken to avoid exceeding the rating specified. Latch-Up Avoidance Unlike conventional CMOS devices, UltraCMOS™ devices are immune to latch-up. IF differential output ©2006 Peregrine Semiconductor Corp. All rights reserved. Page 2 of 9 Symbol IF2 Table 2. Pin Descriptions Pin No. Table 3. Absolute Maximum Ratings Document No. 70-0087-03 │ UltraCMOS™ RFIC Solutions PE4134 Product Specification Evaluation Kit Figure 4. Evaluation Board Layout Table 4. Bill of Materials Reference Value / Description T2 M/A Com ETK4-2T R1 0Ω U1 PE4134 MLP Mixer J1, J2, J3 SMA Connector Pin1 Applications Support If you have a problem with your evaluation kit or if you have applications questions, please contact applications support: E-Mail: [email protected] (fastest response) Phone: (858) 731-9400 Figure 5. Evaluation Board Schematic Diagram 3 LO 2 T2 1 IF 6-lead MLPM 3 x 3 mm RF 4 5 6 T2, M/A-Com E-Series RF 4:1 Transformer, 2.0 – 1000 MHz, ETK4-2T Figure 6. Evaluation Board Testing Block Diagram, 2-Tone Setup 4134 LO PA IF Eval Board 3 dB 3 dB RF Sig Gen Spectrum Analyzer 3 dB Sig Gen Document No. 70-0087-03 │ www.psemi.com 6 dB Hybrid Tee 6 dB Sig Gen ©2006 Peregrine Semiconductor Corp. All rights reserved. Page 3 of 9 PE4134 Product Specification Typical Performance Data (LO=17 dBm, RF=3 dBm, IF=260 MHz) Figure 8. Input 1dB Compression 0 25 -2 20 1dB Compression (dB) Conversion Loss (dB) Figure 7. Conversion Loss -4 -6 -8 85 C -10 1800 85 C 25 C -40 C 15 10 5 25 C -40 C 1850 1900 1950 0 1800 2000 1850 Frequency (MHz) 1900 1950 2000 Frequency (MHz) Figure 9. Input IP3 Figure 10. Output IP3 30 40 35 25 30 85 C 25 C -40 C 20 OIP3 (dBm) IIP3 (dBm) 25 20 15 85 C 25 C -40 C 15 10 10 5 5 0 1800 1850 1900 1950 Frequency (MHz) ©2006 Peregrine Semiconductor Corp. All rights reserved. Page 4 of 9 2000 0 1800 1850 1900 1950 2000 Frequency (MHz) Document No. 70-0087-03 │ UltraCMOS™ RFIC Solutions PE4134 Product Specification Typical Performance Data (LO=17 dBm, RF=3 dBm, IF=260 MHz) Figure 12. LO-RF Isolation vs. Frequency 0 0 -10 -10 LO-RF Isolation (dB) LO-IF Isolation (dB) Figure 11. LO-IF Isolation vs. Frequency -20 -30 -20 -30 -40 -40 -40 C -50 1800 1850 1900 25 C 1950 85 C -40 C 25 C -50 1800 2000 85 C 1850 1900 1950 2000 Frequency (MHz) Frequency (MHz) Figure 13. LO Port Return Loss @ 25°C Figure 14. RF Port Return Loss @ 25°C 0 0 -5 -5 Return Loss (dB) Return Loss (dB) -10 -15 -20 -25 -30 -10 -15 -20 -35 -40 1500 1550 1600 1650 1700 Frequency (MHz) Document No. 70-0087-03 │ www.psemi.com 1750 1800 -25 1700 1750 1800 1850 1900 1950 2000 2050 2100 Frequency (MHz) ©2006 Peregrine Semiconductor Corp. All rights reserved. Page 5 of 9 PE4134 Product Specification Typical Performance Data @ +25 °C (RF=3 dBm, IF=260 MHz) Figure 15. Conversion Loss across LO Power Figure 16. Input IP3 across LO Power -7 LO=14dBm 40 LO=20dBm LO=18dBm LO=16dBm LO=20dBm 35 LO=18dBm LO=16dBm -8 30 LO=12dBm Input IP3 (dBm) Conversion Loss (dB) -7.5 LO=10dBm -8.5 LO=8dBm -9 LO=14dBm LO=12dBm 25 LO=10dBm LO=8dBm 20 LO=6dBm -9.5 15 LO=6dBm -10 1750 1800 1850 1900 1950 2000 2050 10 1750 1800 1850 Frequency (MHz) 1900 1950 2000 2050 Frequency (MHz) Table 5. Spurious Response Table 6. Spurious Response Spurious Response Spurious Response mRF+nLO mRF+nLO nLO nLO mRF 1 2 3 4 mRF 1 2 3 4 1 5 37 30 50 1 0 32 22 43 2 49 55 65 59 2 57 49 61 62 64 71 64 65 >85 >85 >85 81 3 75 >85 78 80 3 4 >85 84 >85 >85 4 Normalized to dB below PIF Normalized to dB below PIF (RF=1900 Mhz @ 3 dBm, LO=1640 MHz @ 17 dBm) (RF=1900 Mhz @ 3 dBm, LO=1640 MHz @ 17 dBm) ©2006 Peregrine Semiconductor Corp. All rights reserved. Page 6 of 9 Document No. 70-0087-03 │ UltraCMOS™ RFIC Solutions PE4134 Product Specification Figure 17. Package Drawing 6-lead DFN -A- 3.00 6 5 CL -B4 0.125 CL 3.00 PIN MAR 1 K 0.10 C 4 1 2 3 0.10 C 4 0.125 +2° 10° -10° TOP VIEW DETAIL C 0.025 ±0.025 0.100 C 0.70 ± 0.05 0.90 ±0.10 0.20 ±0.05 SEATING PLANE 0.080 C 3 SIDE VIEW SEE DETAIL B 0.025±0.025 CL 0.35 +0.08 -0.02 0.10 0.05 C 0.95 EXPOSED PAD 1 2 DETAIL B -C- 0.17 MIN. 0.29 +0.21 -0.08 3 SEE DETAIL A 0.24 +0.20 -0.08 C A B 0.125 EXPOSED SLUG/ HEAT SINK 0.17 0.30 R0.127 TYP R 0.15 TYP 1.21 ±0.10 0.605 ±0.05 EXPOSED (2X) 6 5 4 3 .20 MIN. THIS FEATURE APPLIES TO BOTH ENDS OF THE PKG. EXPOSED METALIZED FEATURE DETAIL A EDGE OF PLASTIC BODY 1.05±0.05 2.01±0.10 BOTTOM VIEW 1. DIMENSIONS AND TOLERANCES ARE PER ANSi Y14.5 2. DIMENSIONS ARE IN MILLIMETERS, ANGLES ARE IN DEGREES. 3 COPLANARITY APPLIES TO EXPOSED HEAT SLUG AS W ELL AS THE TERMINALS. 4 PROFILE TOLERANCE APPLIES TO PLASTIC BODY ONLY. Document No. 70-0087-03 │ www.psemi.com ©2006 Peregrine Semiconductor Corp. All rights reserved. Page 7 of 9 PE4134 Product Specification Figure 18. Tape and Reel Specifications 6-lead DFN Table 7. Dimensions Dimension DFN 3x3 mm Ao 3.23 ± 0.1 Bo 3.17 ± 0.1 Ko 1.37 ± 0.1 P 4 ± 0.1 W 8 +0.3, -0.1 T 0.254 ± 0.02 R7 Quantity 3000 R13 Quantity N.A. Note: R7 = 7 inch Lock Reel, R13 = 13 inch Lock Reel Table 8. Ordering Information Order Code Part Marking Description Package Shipping Method 4134-01 4134 PE4134-06DFN3x3-12800F 6-lead 3x3 mm DFN 12800 units / Canister 4134-02 4134 PE4134-06DFN3x3-3000C 6-lead 3x3 mm DFN 3000 units / T&R 4134-00 4134-EK PE4134-06DFN3x3-EK Evaluation Board 1 / Box ©2006 Peregrine Semiconductor Corp. All rights reserved. Page 8 of 9 Document No. 70-0087-03 │ UltraCMOS™ RFIC Solutions PE4134 Product Specification Sales Offices The Americas North Asia Pacific Peregrine Semiconductor Corporation Peregrine Semiconductor K.K. 9450 Carroll Park Drive San Diego, CA 92121 Tel 858-731-9400 Fax 858-731-9499 5A-5, 5F Imperial Tower 1-1-1 Uchisaiwaicho, Chiyoda-ku Tokyo 100-0011 Japan Tel: +81-3-3502-5211 Fax: +81-3-3502-5213 Europe Peregrine Semiconductor, Korea Peregrine Semiconductor Europe #B-2402, Kolon Tripolis, #210 Geumgok-dong, Bundang-gu, Seongnam-si Gyeonggi-do, 463-480 S. Korea Tel: +82-31-728-4300 Fax: +82-31-728-4305 Bâtiment Maine 13-15 rue des Quatre Vents F- 92380 Garches, France Tel: +33-1-47-41-91-73 Fax : +33-1-47-41-91-73 South Asia Pacific Space and Defense Products Peregrine Semiconductor, China Americas: Tel: 505-881-0438 Fax: 505-881-0443 Europe, Asia Pacific: 180 Rue Jean de Guiramand 13852 Aix-En-Provence cedex 3, France Tel: +33(0) 4 4239 3361 Fax: +33(0) 4 4239 7227 Shanghai, 200040, P.R. China Tel: +86-21-5836-8276 Fax: +86-21-5836-7652 For a list of representatives in your area, please refer to our Web site at: www.psemi.com Data Sheet Identification Advance Information The product is in a formative or design stage. The data sheet contains design target specifications for product development. Specifications and features may change in any manner without notice. Preliminary Specification The data sheet contains preliminary data. Additional data may be added at a later date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best possible product. Product Specification The data sheet contains final data. In the event Peregrine decides to change the specifications, Peregrine will notify customers of the intended changes by issuing a DCN (Document Change Notice). Document No. 70-0087-03 │ www.psemi.com The information in this data sheet is believed to be reliable. However, Peregrine assumes no liability for the use of this information. Use shall be entirely at the user’s own risk. No patent rights or licenses to any circuits described in this data sheet are implied or granted to any third party. Peregrine’s products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications intended to support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of the use of its products in such applications. The Peregrine name, logo, and UTSi are registered trademarks and UltraCMOS and HaRP are trademarks of Peregrine Semiconductor Corp. ©2006 Peregrine Semiconductor Corp. All rights reserved. Page 9 of 9