GLENAIR 420LB002M08

42
420-002
Sealtite™/Liquidtite Conduit Backshell
Direct Coupling - Low Profile
420 F S 002 M 16 03-6
CONNECTOR
DESIGNATORS
*
A-B -C-D-E-F
G-H-J-K-L-S
* Conn. Desig. B See Note 6
DIRECT COUPLING
Length: S only
(1/2 inch increments:
e.g. 6 = 3 inches)
Product Series
Connector
Designator
Cable Entry (Table V)
Angle and Profile
A = 90
B = 45
S = Straight
Shell Size (Table I)
Finish (Table II)
Basic Part No.
Length ± .060 (1.52)
Min. Order Length 2.0 Inch
(See Note 4)
A Thread
(Table I)
Length *
O-Ring
B
(Table I)
STYLE 2
(STRAIGHT)
J
K **
* Length ± .060 (1.52)
Min. Order Length 1.5 Inch
(See Note 4)
N Wrench Flat
(Table V)
L **
M **
** (Table V)
J
G
(Table III) (Table IV)
E
(Table III) (Table IV)
B
(Table I)
Sealtite/Liquidtite
Conduit or Equivalent
(Customer Furnished)
F (Table IV)
B
(Table I)
H
(Table IV)
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
Series 42 - Page 4
42
420-002
Sealtite™/Liquidtite Conduit Backshell
Direct Coupling - Low Profile
Shell
Size
08/09
10/11
12/13
14/15
16/17
18/19
20/21
22/23
24/25
28/29
32/33
36
40
TABLE III: FRONT ADAPTER
J Max - Conn. Designator
A-E-F
D-B-G-K
J-H-L-S
C
1.180 (30.0) 1.250 (31.8)
1.180 (30.0) 1.250 (31.8)
1.180 (30.0) 1.250 (31.8) 1.735 (44.1)
1.180 (30.0) 1.250 (31.8) 1.915 (48.6)
1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
1.610 (40.9) 1.560 (39.6) 1.915 (48.6)
1.610 (40.9) 1.750 (44.5) 1.915 (48.6)
1.610 (40.9) 1.750 (44.5) 1.915 (48.6)
1.610 (40.9) 2.190 (55.6) 1.915 (48.6)
Elbow
Size
01
02
03
04
05
06
07
Dash
Conduit
No. Size (Ref.)
01
3/8
02
1/2
03
3/4
04
1
05
1 1/4
06
1 1/2
07
2
© 2005 Glenair, Inc.
See inside back cover
fold-out or pages 13 and
14 for Tables I and II.
1. When maximum cable entry (page 22) is exceeded, Style
2 will be supplied. (Function S only).
2. Metric dimensions (mm) are indicated in parentheses.
3. Cable range is defined as the accommodations range for
the wire bundle or cable. Dimensions shown are not
intended for inspection criteria.
4. Consult factory for shorter lengths on straight backshells.
5. Sealtite is a trademark of Anaconda Corp.
6. When using Connector Designator B refer to pages 18
and 19 for part number development.
TABLE IV: ELBOW DIMENSIONS
E
F
G
Max
Max
Max
.630 (16.0) 1.870 (47.5)
.709 (18.0)
.692 (17.6) 1.930 (49.0)
.734 (18.6)
.848 (21.5) 2.130 (54.1)
.990 (25.1)
1.036 (26.3) 2.320 (58.9) 1.090 (27.7)
1.130 (28.7) 2.470 (62.7) 1.325 (33.7)
1.317 (33.5) 2.620 (66.5) 1.827 (46.4)
1.348 (34.2) 2.710 (68.8) 2.027 (51.5)
H
Max
1.940 (49.3)
1.960 (49.8)
2.120 (53.8)
2.290 (58.2)
2.400 (61.0)
2.820 (71.6)
2.820 (71.6)
TABLE V: CABLE ENTRY
L Dimension
K Dimension
Min
Max
Max
Min
.484 (12.3)
.710 (18.0)
.504 (12.8)
.690 (17.5)
.622 (15.8)
.840 (21.3)
.642 (16.3)
.820 (20.8)
.820 (20.8)
.840 (21.3)
1.030 (26.2) 1.050 (26.7)
1.041 (26.4) 1.066 (27.1)
1.290 (32.8) 1.315 (33.4)
1.380 (35.1) 1.410 (35.8)
1.630 (41.4) 1.660 (42.2)
1.575 (40.0) 1.600 (40.6)
1.875 (47.6) 1.900 (48.3)
2.020 (51.3) 2.045 (51.9)
2.350 (59.7) 2.375 (60.3)
CAGE Code 06324
M
Max
1.155 (29.3)
1.282 (32.6)
1.531 (38.9)
1.781 (45.2)
2.218 (56.3)
2.468 (62.7)
3.031 (77.0)
N Max
Wrench Flat
1.000 (25.4)
1.125 (28.6)
1.375 (34.9)
1.625 (41.3)
2.062 (52.4)
2.312 (58.7)
2.875 (73.0)
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
Series 42 - Page 5