DISCRETE SEMICONDUCTORS DATA SHEET age MBD128 PBSS5320D 20 V low VCEsat PNP transistor Product specification 2002 Jun 12 Philips Semiconductors Product specification 20 V low VCEsat PNP transistor PBSS5320D FEATURES QUICK REFERENCE DATA • Low collector-emitter saturation voltage SYMBOL • High current capability VCEO collector-emitter voltage −20 V IC collector current (DC) −3 A ICM peak collector current −5 A RCEsat equivalent on-resistance 133 mΩ • Improved device reliability due to reduced heat generation APPLICATIONS • Supply line switching circuits PARAMETER MAX. UNIT PINNING • Battery management applications PIN • DC/DC converter applications • Strobe flash units • Heavy duty battery powered equipment (motor and lamp drivers). DESCRIPTION DESCRIPTION 1 collector 2 collector 3 base 4 emitter 5 collector 6 collector PNP low VCEsat transistor in a SOT457 (SC-74) plastic package. 6 MARKING 5 4 1, 2, 5, 6 TYPE NUMBER MARKING CODE 3 PBSS5320D 52 4 1 Top view Fig.1 2002 Jun 12 2 2 3 MAM466 Simplified outline (SOT457; SC-74) and symbol. Philips Semiconductors Product specification 20 V low VCEsat PNP transistor PBSS5320D LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VCBO collector-base voltage open emitter − −20 V VCEO collector-emitter voltage open base − −20 V VEBO emitter-base voltage open collector − −5 V IC collector current (DC) − −3 A ICM peak collector current − −5 A IB base current − −500 mA Ptot total power dissipation Tamb ≤ 25 °C; note 1 − 600 mW Tamb ≤ 25 °C; note 2 − 750 mW Tstg storage temperature −65 +150 °C Tj junction temperature − 150 °C Tamb operating ambient temperature −65 +150 °C Notes 1. Device mounted on a printed-circuit board, single side copper, tinplated, mounting pad for collector 1 cm2. 2. Device mounted on a printed-circuit board, single side copper, tinplated, mounting pad for collector 6 cm2. THERMAL CHARACTERISTICS SYMBOL Rth j-a PARAMETER thermal resistance from junction to ambient CONDITIONS VALUE UNIT note 1 208 K/W note 2 160 K/W Notes 1. Device mounted on a printed-circuit board, single side copper, tinplated, mounting pad for collector 1 cm2. 2. Device mounted on a printed-circuit board, single side copper, tinplated, mounting pad for collector 6 cm2. 2002 Jun 12 3 Philips Semiconductors Product specification 20 V low VCEsat PNP transistor PBSS5320D CHARACTERISTICS Tamb = 25 °C unless otherwise specified. SYMBOL ICBO PARAMETER collector-base cut-off current VCB = −20 V; IE = 0 IEBO emitter-base cut-off current hFE DC current gain VCEsat CONDITIONS collector-emitter saturation voltage MIN. MIN. MAX. UNIT − − −100 nA VCB = −20 V; IE = 0; Tj = 150 °C − − −50 µA VEB = −5 V; IC = 0 − − −100 nA VCE = −2 V; IC = −100 mA 200 − − VCE = −2 V; IC = −500 mA 200 − − VCE = −2 V; IC = −1000 mA; note 1 200 − − VCE = −2 V; IC = −2000 mA; note 1 150 − − IC = −500 mA; IB = −5 mA − − −130 mV IC = −500 mA; IB = −50 mA − − −80 mV IC = −1 A; IB = −50 mA − − −160 mV IC = −2 A; IB = −20 mA; note 1 − − −400 mV IC = −2 A; IB = −200 mA; note 1 − − −250 mV IC = −3 A; IB = −300 mA; note 1 − − −400 mV RCEsat equivalent on-resistance IC = −3 A; IB = −300 mA; note 1 − 85 133 mΩ VBEsat base-emitter saturation voltage IC = −2 A; IB = −200 mA; note 1 − − −1.2 V VBEon base-emitter turn-on voltage VCE = −2 V; IC = −1 A; note 1 −1.2 − − V Cc collector capacitance VCB = −10 V; IE = Ie = 0; f = 1 MHz − − 50 pF FT transition frequency IC = −200 mA; VCE = −10 V; f = 100 MHz 100 − − MHz Note 1. Pulse test: tp ≤ 300 µs; δ ≤ 0.02. 2002 Jun 12 4 Philips Semiconductors Product specification 20 V low VCEsat PNP transistor PBSS5320D PACKAGE OUTLINE Plastic surface mounted package; 6 leads SOT457 D E B y A HE 6 5 X v M A 4 Q pin 1 index A A1 c 1 2 3 Lp bp e w M B detail X 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 bp c D E e HE Lp Q v w y mm 1.1 0.9 0.1 0.013 0.40 0.25 0.26 0.10 3.1 2.7 1.7 1.3 0.95 3.0 2.5 0.6 0.2 0.33 0.23 0.2 0.2 0.1 OUTLINE VERSION SOT457 2002 Jun 12 REFERENCES IEC JEDEC EIAJ SC-74 5 EUROPEAN PROJECTION ISSUE DATE 97-02-28 01-05-04 Philips Semiconductors Product specification 20 V low VCEsat PNP transistor PBSS5320D DATA SHEET STATUS DATA SHEET STATUS(1) PRODUCT STATUS(2) DEFINITIONS Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-650A. Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. DEFINITIONS DISCLAIMERS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Right to make changes Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 2002 Jun 12 6 Philips Semiconductors Product specification 20 V low VCEsat PNP transistor PBSS5320D NOTES 2002 Jun 12 7 Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: [email protected]. SCA74 © Koninklijke Philips Electronics N.V. 2002 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 613514/01/pp8 Date of release: 2002 Jun 12 Document order number: 9397 750 09759