Philips Semiconductors Product Specification PowerMOS transistor GENERAL DESCRIPTION N-channel enhancement mode field-effect power transistor in a plastic envelope. The device is intended for use in Switched Mode Power Supplies (SMPS), motor control, welding, DC/DC and AC/DC converters, and in general purpose switching applications. PINNING - TO220AB PIN QUICK REFERENCE DATA SYMBOL PARAMETER MAX. UNIT VDS ID Ptot Tj RDS(ON) Drain-source voltage Drain current (DC) Total power dissipation Junction temperature Drain-source on-state resistance 100 11 60 175 0.25 V A W ˚C Ω PIN CONFIGURATION DESCRIPTION 1 gate 2 drain 3 source tab PHP10N10E SYMBOL d tab g drain s 1 23 LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134) SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VDS VDGR ±VGS ID ID IDM Ptot Tstg Tj Drain-source voltage Drain-gate voltage Gate-source voltage Drain current (DC) Drain current (DC) Drain current (pulse peak value) Total power dissipation Storage temperature Junction Temperature RGS = 20 kΩ Tmb = 25 ˚C Tmb = 100 ˚C Tmb = 25 ˚C Tmb = 25 ˚C - - 55 - 100 100 30 11 7.7 44 60 175 175 V V V A A A W ˚C ˚C THERMAL RESISTANCES SYMBOL PARAMETER Rth j-mb Thermal resistance junction to mounting base Thermal resistance junction to ambient Rth j-a September 1997 CONDITIONS 1 MIN. TYP. MAX. UNIT - - 2.5 K/W - 60 - K/W Rev 1.000 Philips Semiconductors Product Specification PowerMOS transistor PHP10N10E STATIC CHARACTERISTICS Tj = 25 ˚C unless otherwise specified SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT V(BR)DSS Drain-source breakdown voltage Gate threshold voltage Zero gate voltage drain current Zero gate voltage drain current Gate source leakage current Drain-source on-state resistance VGS = 0 V; ID = 0.25 mA 100 - - V VDS = VGS; ID = 1 mA VDS = 100 V; VGS = 0 V; Tj = 25 ˚C VDS = 100 V; VGS = 0 V; Tj = 125 ˚C VGS = ±30 V; VDS = 0 V VGS = 10 V; ID = 5.5 A 2.1 - 3.0 1 0.1 10 0.22 4.0 10 1.0 100 0.25 V µA mA nA Ω MIN. TYP. MAX. UNIT VGS(TO) IDSS IDSS IGSS RDS(ON) DYNAMIC CHARACTERISTICS Tj = 25 ˚C unless otherwise specified SYMBOL PARAMETER CONDITIONS gfs Forward transconductance VDS = 25 V; ID = 5.5 A 3 4.2 - S Ciss Coss Crss Input capacitance Output capacitance Feedback capacitance VGS = 0 V; VDS = 25 V; f = 1 MHz - 400 90 35 500 120 50 pF pF pF td on tr td off tf Turn-on delay time Turn-on rise time Turn-off delay time Turn-off fall time VDD = 30 V; ID = 3 A; VGS = 10 V; RGS = 50 Ω; Rgen = 50 Ω - 9 25 30 20 14 40 45 40 ns ns ns ns Ld Internal drain inductance - 3.5 - nH Ld Internal drain inductance - 4.5 - nH Ls Internal source inductance Measured from contact screw on tab to centre of die Measured from drain lead 6 mm from package to centre of die Measured from source lead 6 mm from package to source bond pad - 7.5 - nH MIN. TYP. MAX. UNIT REVERSE DIODE LIMITING VALUES AND CHARACTERISTICS Tj = 25 ˚C unless otherwise specified SYMBOL PARAMETER CONDITIONS IDR - - - 11 A IDRM VSD Continuous reverse drain current Pulsed reverse drain current Diode forward voltage IF = 11 A ; VGS = 0 V - 1.2 44 1.5 A V trr Qrr Reverse recovery time Reverse recovery charge IF = 11 A; -dIF/dt = 100 A/µs; VGS = 0 V; VR = 30 V - 90 0.35 - ns µC MIN. TYP. MAX. UNIT - - 35 mJ AVALANCHE LIMITING VALUE Tmb = 25 ˚C unless otherwise specified SYMBOL PARAMETER CONDITIONS WDSS Drain-source non-repetitive unclamped inductive turn-off energy ID = 11 A ; VDD ≤ 50 V ; VGS = 10 V ; RGS = 50 Ω September 1997 2 Rev 1.000 Philips Semiconductors Product Specification PowerMOS transistor 120 PHP10N10E Normalised Power Derating PD% 1E+01 110 Zth j-mb / (K/W) BUKX52 100 90 80 1E+00 70 0.5 0.2 0.1 0.05 1E-01 0.02 60 50 40 30 tp PD 10 0 20 40 60 80 100 Tmb / C 120 140 160 180 Fig.1. Normalised power dissipation. PD% = 100⋅PD/PD 25 ˚C = f(Tmb) 1E-05 1E-03 t/s 1E-01 1E+01 Fig.4. Transient thermal impedance. Zth j-mb = f(t); parameter D = tp/T Normalised Current Derating ID% t T 1E-02 1E-07 0 120 tp T D= 0 20 20 BUK452-100A ID / A 20 15 10 110 VGS / V = 100 90 8 15 80 7 70 60 10 50 6 40 30 5 20 5 4 10 0 0 20 40 60 80 100 Tmb / C 120 140 160 0 180 2 4 6 8 10 VDS / V Fig.2. Normalised continuous drain current. ID% = 100⋅ID/ID 25 ˚C = f(Tmb); conditions: VGS ≥ 10 V 100 0 ID / A Fig.5. Typical output characteristics, Tj = 25 ˚C. ID = f(VDS); parameter VGS BUK452-100 1.0 BUK452-100A RDS(ON) / Ohm A ID S/ )= VD B N O S( 5.5 6 VGS / V = 6.5 7 tp = 10 us RD 10 4.5 5 0.8 7.5 8 0.6 100 us DC 1 ms 10 0.4 20 10 ms 100 ms 1 0.2 0 0.1 1 10 100 VDS / V Fig.3. Safe operating area. Tmb = 25 ˚C ID & IDM = f(VDS); IDM single pulse; parameter tp September 1997 0 2 4 6 8 10 12 ID / A 14 16 18 20 Fig.6. Typical on-state resistance, Tj = 25 ˚C. RDS(ON) = f(ID); parameter VGS 3 Rev 1.000 Philips Semiconductors Product Specification PowerMOS transistor PHP10N10E ID / A VGS(TO) / V BUK452-100A max. 4 20 25 Tj / C = 16 typ. 3 150 12 min. 2 8 1 4 0 0 0 2 4 6 8 10 -60 -20 20 60 Tj / C VGS / V gfs / S BUK452-100A 180 1E-02 3 1E-03 2 1E-04 1 1E-05 SUB-THRESHOLD CONDUCTION ID / A 1E-01 4 2% typ 98 % 1E-06 0 0 2 4 6 8 10 ID / A 12 14 16 18 0 Fig.8. Typical transconductance, Tj = 25 ˚C. gfs = f(ID); conditions: VDS = 25 V 2.4 140 Fig.10. Gate threshold voltage. VGS(TO) = f(Tj); conditions: ID = 1 mA; VDS = VGS Fig.7. Typical transfer characteristics. ID = f(VGS) ; conditions: VDS = 25 V; parameter Tj 5 100 2 VGS / V 3 4 Fig.11. Sub-threshold drain current. ID = f(VGS); conditions: Tj = 25 ˚C; VDS = VGS Normalised RDS(ON) = f(Tj) a 1 10000 BUK4y2-100 C / pF 2.2 2.0 1.8 1.6 1000 1.4 Ciss 1.2 1.0 0.8 100 Coss 0.6 0.4 Crss 0.2 0 -60 -20 20 60 Tj / C 100 140 10 180 0 40 VDS / V Fig.9. Normalised drain-source on-state resistance. a = RDS(ON)/RDS(ON)25 ˚C = f(Tj); ID = 5.5 A; VGS = 10 V September 1997 20 Fig.12. Typical capacitances, Ciss, Coss, Crss. C = f(VDS); conditions: VGS = 0 V; f = 1 MHz 4 Rev 1.000 Philips Semiconductors Product Specification PowerMOS transistor PHP10N10E BUK452-100 VGS / V 12 120 WDSS% 110 VDS / V =20 10 100 90 80 8 80 70 60 6 50 40 4 30 20 2 10 0 0 0 2 4 6 8 20 10 40 QG / nC Fig.13. Typical turn-on gate-charge characteristics. VGS = f(QG); conditions: ID = 11 A; parameter VDS IF / A 60 80 100 120 Tmb / C 140 160 180 Fig.15. Normalised avalanche energy rating. WDSS% = f(Tmb); conditions: ID = 11 A BUK452-100A VDD + L 20 VDS - VGS -ID/100 10 T.U.T. 0 Tj / C = 25 150 RGS R 01 shunt 0 0 1 VSDS / V 2 Fig.16. Avalanche energy test circuit. WDSS = 0.5 ⋅ LID2 ⋅ BVDSS /(BVDSS − VDD ) Fig.14. Typical reverse diode current. IF = f(VSDS); conditions: VGS = 0 V; parameter Tj September 1997 5 Rev 1.000 Philips Semiconductors Product Specification PowerMOS transistor PHP10N10E MECHANICAL DATA Dimensions in mm 4,5 max Net Mass: 2 g 10,3 max 1,3 3,7 2,8 5,9 min 15,8 max 3,0 max not tinned 3,0 13,5 min 1,3 max 1 2 3 (2x) 0,9 max (3x) 2,54 2,54 0,6 2,4 Fig.17. TO220AB; pin 2 connected to mounting base. Notes 1. Observe the general handling precautions for electrostatic-discharge sensitive devices (ESDs) to prevent damage to MOS gate oxide. 2. Refer to mounting instructions for TO220 envelopes. 3. Epoxy meets UL94 V0 at 1/8". September 1997 6 Rev 1.000 Philips Semiconductors Product Specification PowerMOS transistor PHP10N10E DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. Philips Electronics N.V. 1997 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. September 1997 7 Rev 1.000