ECO-PACTM 2 Half Three Phase Rectifier Bridge PSWD 100 PSVD 100 IdAV = 100 A VRRM= 800-1800V Preliminary Data Sheet VRSM VDSM (V) 800 1200 1400 1600 1800 VRRM Type VDRM (V) 800 PSWD 100/08 1200 PSWD 100/12 1400 PSWD 100/14 1600 PSWD 100/16 1800 PSWD 100/18 T-X18 PSVD 100/08 PSVD 100/12 PSVD 100/14 PSVD 100/16 PSVD 100/18 X13-15 H-K10 T-X18 X13-15 H-K10 A4-6 A4-6 PSWD PSVD Symbol Test Conditions IdAV ① TC = 85°C; module, sinusoidal 120° 100 A IFSM TVJ = 45°C; VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 480 510 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 420 450 A A TVJ = 45°C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1150 1090 A2 s A2 s TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 880 850 A2 s A2s -40...+150 150 -40...+125 °C °C °C 2500 3000 V~ V~ I2t Maximum Ratings TVJ TVJM Tstg VISOL 50/60 Hz, RMS IISOL ≤ 1 mA Md Mounting torque (M4) Weight typ. t = 1 min t=1s 1.5 - 2 14 - 18 24 Nm lb.in. g Features • • • • • Package with DCB ceramic base plate Isolation voltage 3000 V∼ Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering Applications • • • • Supplies for DC power equipment Input rectifier for PWM inverter Battery DC power supplies Field supply for DC motors Advantages • • • • Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability Small and light weight Package style and outline Dimensions in mm (1mm = 0.0394“) Symbol Test Conditions IR VR = VRRM; VR = VRRM; TVJ = 25°C TVJ = TVJM ≤ ≤ VF IF TVJ = 25°C ≤ 1.5 V VT0 rT For power-loss calculations only 0.8 6.6 V mΩ RthJC per diode; DC current per module per diode, DC current (typ.) per module (typ.) 1.2 0.4 1.5 0.5 K/W K/W K/W K/W 11.2 9.7 50 mm mm m/s 2 RthJH dS dA a = 80 A; Characteristic Values Creeping distance on surface Creepage distance in air Max. allowable acceleration 0.05 3 mA mA Data according to IEC 60747 refer to a single diode unless otherwise stated ① for resistive load at bridge output. POWERSEM GmbH, Walpersdorfer Str. 53 2005 POWERSEM reserves the right to change limits, test conditions and dimensions D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20