ECO-PACTM 1 Three Phase Rectifier Bridge PSD 24F IdAV VRRM trr with fast Recovery Epitaxial Diode (FRED) + Preliminary Data Sheet VRSM VRRM Type VDSM VDRM (V) (V) 400 400 PSD 24F/04 600 600 PSD 24F/06 ~H ~A ~N Symbol Test Conditions I*dAV IdAVM IFSM TC = 85 °C, ∫ i2 dt TVJ TVJM Tstg VISOL K - Maximum Ratings (per module) 34 A 90 A TVJ = 45 °C t = 10 ms (50 Hz), sine 50 A VR = 0 t = 8.3 ms (60 Hz), sine 55 A TVJ = TVJM t = 10 ms (50 Hz), sine 45 A VR = 0 t = 8.3 ms (60 Hz), sine 50 A TVJ = 45 °C t = 10 ms (50 Hz), sine 15 A²s VR = 0 t = 8.3 ms (60 Hz), sine 15 A²s TVJ = TVJM t = 10 ms (50 Hz), sine 10 A²s VR = 0 t = 8.3 ms (60 Hz), sine 10 A²s -40... + 150 150 °C °C -40... + 125 °C 50/60 Hz, RMS t = 1 min 2500 V∼ IISOL ≤ 1 mA 3000 V∼ 1.5 - 1.8 14 - 16 16 Nm lb.in. g t=1s Md Mounting torque Weight typ. Symbol Test Conditions IR VR = VRRM, TVJ = TVJM ≤ 0.25 mA VR = VRRM, TVJ = 25°C ≤ 0.06 mA IF = 10 A, ≤ 2.09 V 1.18 V 22 mΩ 2.5 0.42 2.8 K/W K/W K/W VF VTO rT RthJC RthJK (M4) Characteristic Value TVJ = 25 °C For power-loss calculations only per diode; DC per module per diode; DC per module IRM = 34 A = 400 - 600 V = 35 ns IF=12A; -diF/dt=100A/µs; VR=100V 0.47 K/W typ. 4 A typ. 35 ns Features • • • • • Package with DCB ceramic base plate • UL registered, E 148688 Isolation voltage 3000 V∼ Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering Applications • • • • Supplies for DC power equipment Input and output rectifier for high frequency Battery DC power supplies Field supply for DC motors Advantages • • • • • Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability Low noise switching Small and light weight Package style and outline Dimensions in mm (1mm = 0.0394“) L=0.05 mH; TVJ= 100°C trr IF=1A; -diF/dt=50A/µs; VR=30V; TVJ= 25°C ds dA a Creeping distance on surface Creeping distance in air Max. allowable acceleration 11.2 9.7 50 mm mm m/s² Data according to IEC 60747 refer to a single diode unless otherwise stated *- for resistive load at bridge output 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20