ECO-PACTM 2 Three Phase Rectifier Bridge PSD 150F IdAV VRRM trr with fast Recovery Epitaxial Diode (FRED) + Preliminary Data Sheet VRSM VRRM Type VDSM VDRM (V) (V) 800 800 PSD 150F/08 1200 1200 PSD 150F/12 PS ~ A1 ~ L9 ~ K10 EG - Symbol Test Conditions I*dAV IFSM TC = 75 °C, (per module) 130 A TVJ = 45 °C t = 10 ms (50 Hz), sine 500 A VR = 0 t = 8.3 ms (60 Hz), sine 550 A TVJ = TVJM t = 10 ms (50 Hz), sine 450 A VR = 0 t = 8.3 ms (60 Hz), sine 500 A TVJ = 45 °C t = 10 ms (50 Hz), sine 1250 A²s VR = 0 t = 8.3 ms (60 Hz), sine 1250 A²s TVJ = TVJM t = 10 ms (50 Hz), sine 1010 A²s VR = 0 t = 8.3 ms (60 Hz), sine 1040 A²s -40... + 150 150 °C °C -40... + 125 °C 3000 V∼ ∫ i2 dt TVJ TVJM Tstg VISOL Maximum Ratings 50/60 Hz, RMS t = 1 min IISOL ≤ 1 mA Md Mounting torque Weight typ. 3600 V∼ 1.5 - 2.0 14 - 18 22 Nm lb.in. g t=1s (M4) Symbol Test Conditions IR VR = VRRM, TVJ = TVJM ≤ 2.5 mA VR = VRRM, TVJ = 25°C ≤ 0.65 mA VF VTO rT RthJC RthJK IF = 60 A, TVJ = 25 °C Characteristic Value ≤ 2.75 V For power-loss calculations only per diode; DC per module per diode; DC per module IRM = 130 A = 800 - 1200 V = 40 ns IF=130A; -diF/dt=100A/µs; VR=100V 1.12 V 5.7 mΩ 0.85 0.14 1.0 K/W K/W K/W 0.16 K/W typ. 7.8 A typ. 40 ns Features • • • • • Package with DCB ceramic base plate • UL registered, E 148688 Isolation voltage 3000 V∼ Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering Applications • • • • Supplies for DC power equipment Input and output rectifier for high frequency Battery DC power supplies Field supply for DC motors Advantages • • • • • Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability Low noise switching Small and light weight Package style and outline Dimensions in mm (1mm = 0.0394“) L=0.05 mH; TVJ= 100°C trr IF=1A; -diF/dt=200A/µs; VR=30V; TVJ= 25°C ds dA a Creeping distance on surface Creeping distance in air Max. allowable acceleration 11.2 9.45 50 mm mm m/s² Data according to IEC 60747 refer to a single diode unless otherwise stated *- for resistive load at bridge output 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20