853-0581B 06688 SEATING PLANE –T– –D– 0.023 (0.58) 0.015 (0.38) 0.070 (1.78) 0.050 (1.27) T 0.785 (19.94) 0.753 (19.13) 0.100 (2.54) BSC E D 0.010 (0.254) 0.165 (4.19) 0.125 (3.18) 0.200 (5.08) 0.165 (4.19) 0.286 (7.26) 0.245 (6.22) 0.110 (2.79) 0.050 (1.27) 0.015 (0.38) 0.010 (0.25) 0.045 (1.143) 0.020 (0.51) 0.175 (4.45) 0.145 (3.68) 0.395 (10.03) 0.300 (7.62) BSC 0.300 (7.62) (NOTE 4) 0.320 (8.13) 0.290 (7.37) (NOTE 4) 5. Pin numbers start with Pin #1 and continue counterclockwise to Pin #14 when viewed from the top. 2. Dimension and tolerancing per ANSI Y14. 5M-1982. 3. “T”, “D”, and “E” are reference datums on the body and include allowance for glass overrun and meniscus on the seal line, and lid to base mismatch. 4. These dimensions measured with the leads constrained to be perpendicular to plane T. NOTES: 1. Controlling dimension: Inches. Millimeters are shown in parentheses. 0581B PIN # 1 –E– 0.110 (2.79) 0.050 (1.27) Philips Semiconductors Package outlines 14-PIN (300 mils wide) CERAMIC DUAL IN-LINE (F) PACKAGE