Product Brief SingleStone PBA 31307 The BluetoothR module SingleStone Key Benefits offers a qualified ready-to-use solution for accelerated time-to-market. It is based on Infineon's successful BlueMoon R Single Cellular IC, a single-chip Bluetooth solution. The high level of integration of the BlueMoon Single Cellular IC resulted into a competitive module footprint providing an optimized pad layout for easy design-in. The SingleStone module is qualified for a temperature range from -40 to +85 °C enabling a wide spectrum of applications in a variety of different environments. Additionally, SingleStone is Bluetooth 1.2 compliant and supports features such as Adaptive Frequency Hopping, Enhanced SCO and Fast Connection Setup. Thus the SingleStone module is the perfect match for today's and future requirements of a standard Bluetooth HCI application. ■ ■ ■ ■ Bluetooth qualified module component Reduced time-to-market Easy production handling Reduced cost of ownership Applications ■ ■ ■ ■ ■ Consumer, Automotive & Industrial Applications Hands-free gateway Dial-up networking Data transfer & synchronization Advanced Audio Key Features ■ ■ ■ ■ ■ ■ ■ ■ ■ Supporting all released Bluetooth 1.1 profiles Bluetooth 1.2 support – Adaptive frequency hopping – Extended SCO – Fast connection setup Programmable power-down modes On-module Bluetooth reference clock oscillator On-module E²PROM for Bluetooth device data Full automatic tuning and trimming (no manual or SW tuning) High RF sensitivity (-85 dBm @ 0.1% BER) On-chip 2.4 GHz RF driver amplifier with max. +7dBm output power Automatic control of output power for reduced power consumption Note: The Bluetooth word mark is owned by the Bluetooth SIG, Inc. and any use of this mark by Infineon Technologies AG is under license. The BlueMoon trade mark is owned by Infineon Technologies AG. www.infineon.com/bluetooth Wireless Communication N e v e r s t o p t h i n k i n g . Product Brief Block Diagram BlueMoon Single Cellular PMB 8761 Link Manager PCM Baseband Power Mgmt PCM HCI Radio ■ ■ Output Power Control ■ ■ UART TX TX ■ ■ Link Controller ROM Balun Filter BT 1.2 Core ■ HCI-UART (2, 4 wired) PCM (A-law, µ-law) Wake up line On-module E 2 PROM for Bluetooth device data On-module 26 MHz reference clock On-module balun/filter On-module voltage regulator Firmware RX RX RAM Voltage Regulator 26 MHz TCXO EEPROM 3.0 ... 3.6 V 32.768 kHz Product Summary Product Sales Code Package SingleStone PBA 31307 Module 11.86 x 10.6 mm², 72 pads at 1.27 mm pitch Home Infotainment Bringing mobile connectivity to your home. Due to its standardized HCI-UART interface, SingleStone is the perfect module for easy integration into all kinds of consumer electronic devices. Having all RF components integrated and being Bluetooth 1.2 pre-qualified, it allows shortest time-to-market at unbeatable value for money. Similarly, all these applications can be realized in the automotive and industrial environment (e.g. car infotainment), as SingleStone meets segments’ extended quality requirements. Application Example How to reach us: http://www.infineon.com Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81669 München © Infineon Technologies AG 2004. All Rights Reserved. Template: pb_tmplt.fm/4 Published by Infineon Technologies AG Attention please! The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office. Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in lifesupport devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Ordering No. B134-H8256-G1-X-7600 Printed in Germany PS 04041. NB