DISCRETE SEMICONDUCTORS DATA SHEET book, halfpage M3D121 PRLL4001; PRLL4002 Rectifiers Product specification Supersedes data of November 1993 1996 Jun 10 Philips Semiconductors Product specification Rectifiers PRLL4001; PRLL4002 FEATURES DESCRIPTION • Glass passivated Cavity free cylindrical glass package through Implotec(1) technology. • High maximum operating temperature • Low leakage current This package is hermetically sealed and fatigue free as coefficients of expansion of all used parts are matched. (1) Implotec is a trademark of Philips. • Excellent stability • Shipped in 8 mm embossed tape k handbook, 4 columns a • Smallest surface mount rectifier outline. MAM061 Marking code PRLL4001: 4001. Marking code PRLL4002: 4002. Fig.1 Simplified outline (SOD87) and symbol. LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). SYMBOL VRRM VR IF(AV) PARAMETER CONDITIONS MIN. MAX. UNIT PRLL4001 − 50 V PRLL4002 − 100 V PRLL4001 − 50 V PRLL4002 − 100 V repetitive peak reverse voltage continuous reverse voltage average forward current averaged over any 20 ms period; Ttp = 105 °C − 1.60 A averaged over any 20 ms period; Tamb = 65 °C; see Fig.2 − 0.68 A − 10 A − 20 A IFRM repetitive peak forward current IFSM non-repetitive peak forward current Tstg storage temperature −65 +175 °C Tj junction temperature −65 +175 °C 1996 Jun 10 half sinewave; 60 Hz 2 Philips Semiconductors Product specification Rectifiers PRLL4001; PRLL4002 ELECTRICAL CHARACTERISTICS Tj = 25 °C; unless otherwise specified. SYMBOL PARAMETER CONDITIONS MAX. VF forward voltage IF = 1 A; see Fig.3 VF(AV) full-cycle average forward voltage IF(AV) = 1 A IR reverse current VR = VRmax 10 µA VR = VRmax; Tamb = 100 °C 50 µA VR = VRRMmax; Tamb = 75 °C 30 µA IR(AV) full-cycle average reverse current 1.1 UNIT 0.8 V V THERMAL CHARACTERISTICS SYMBOL PARAMETER Rth j-tp thermal resistance from junction to tie-point Rth j-a thermal resistance from junction to ambient CONDITIONS note 1 VALUE UNIT 30 K/W 150 K/W Note 1. Device mounted on epoxy-glass printed-circuit board, 1.5 mm thick; thickness of copper ≥40 µm, see Fig.4. For more information please refer to the “General Part of associated Handbook”. 1996 Jun 10 3 Philips Semiconductors Product specification Rectifiers PRLL4001; PRLL4002 GRAPHICAL DATA MBH384 1.0 MBH385 10 handbook, halfpage handbook, halfpage IF (A) IF(AV) (A) 1 0.5 (1) (2) (3) 10−1 0 0 100 0 200 Tamb (°C) 0.5 1 VF (V) 1.5 (1) Tamb = 100 °C. (2) Tamb = 20 °C. (3) Tamb = −50 °C. Fig.2 Maximum average forward current as a function of ambient temperature. Fig.3 50 4.5 50 2.5 1.25 MSB213 Dimensions in mm. Fig.4 Printed-circuit board for surface mounting. 1996 Jun 10 4 Forward current as a function of forward voltage; typical values. Philips Semiconductors Product specification Rectifiers PRLL4001; PRLL4002 PACKAGE OUTLINE 3.5 handbook, full pagewidth 0.2 0.3 OD= 2.05 0.05 MBA505 O D1 = 1.9 0.1 Dimensions in mm. Fig.5 SOD87. DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. 1996 Jun 10 5