ERbic CAN, vertical pin 1 10 4,5 - 26,9 with switch 8 without switch 17,5 switch 47,4 OFF 21 ON 5,1 with switch without switch (switchable bus termination resistor) 25 #4/40 UNC 16 35 64,6 103652 103669 Switch CAN high, low, ground (HLG) Screw clamp 6 pin Screw clamp 10 pin CAN signals incl. power supply anthracite without Node 103653 Termination Part number Type Programming interface (PU) Notes: 1. Operating temperature: -20°C / +70°C 2. Protection class: IP40 3. Sealing plate: Drawing number 103356. Screw clamp 5 pin green CAN signals incl. power supply Cable termination Colour Signals / Power supply Tolerances Information: Scale All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Date Fastening screw thread 1:1 Angaben zu entsprechender Ident-Nr. siehe Fertigungsunterlagen. For further information about I.D. number see manufacturing document. Designation Subject to modification without prior notice. Drawing will not be updated. ERbic vertical CAN General plan 324267 www.ERNI.com Index #4-40 UNC CAN signals incl. power supply Screw clamp 10 pin Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 154824 Class ERBIC I A3