ERbic Profibus with PU interface, horizontal ERbic Profibus, horizontal with switch with switch pin 1 (switchable bus termination resistor) pin 1 8 4,5 - 4,5 - 8 (switchable bus termination resistor) 17,5 17,5 #4/40 UNC (inner thread) without switch 10 21,1 47,4 21,1 47,4 10 without switch #4/40 UNC 25 25 5,1 5,1 #4/40 UNC 35 35 with switch 44,8 pin 1 switch 64,6 104050 174048 144037 366326 Screw clamp 4 pin 174049 Spring clamp 4 pin Switch IDC terminal 2x2 pin A- and B Line #4-40 UNC Screw clamp 4 pin light grey Spring clamp 4 pin Switch IDC terminal 2x2 pin pebble grey with Screw clamp 4 pin 144475 103663 Node Screw clamp 4 pin 104329 Termination Screw clamp 2 pin yellow Part number Type Cable termination Colour 103648 Node Screw clamp 4 pin 103649 Termination Screw clamp 2 pin yellow Part number Type Cable termination Colour Programming interface (PU) 144536 pebble grey without 134728 44,8 64,6 Signals / Power Fastening screw thread supply A- and B Line #4-40 UNC Screw clamp 4 pin Programming interface (PU) Notes: 1. Operating temperature: -20°C / +70°C 2. Protection class: IP40 3. Sealing plate: Drawing number 103356. Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. switch without switch OFF ON ON 16 without switch OFF 16 with switch Tolerances Information: in mm Angaben zu entsprechender Ident-Nr. siehe Fertigungsunterlagen. For further information about I.D. number see manufacturing document. Designation Subject to modification without prior notice. Drawing will not be updated. ERbic horizontal Profibus General plan 324261 www.ERNI.com Index Date 1:1 Scale All Dimensions All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Signals / Power Fastening supply screw thread Class ERBIC I A2