ERbic CAN, horizontal, reversed pin 1 4,5 - 8 with switch without switch (switchable bus termination resistor) 21,1 47,4 10 17,5 5,1 25 #4/40 UNC 35 without switch OFF ON 44,8 switch 64,6 366366 Switch 104320 Node 104321 Termination Part number Type CAN high, low, ground (HLG) Spring clamp 6 pin anthracite Programming interface (PU) Notes: 1. Operating temperature: -20°C / +70°C 2. Protection class: IP40 3. Sealing plate: Drawing number 103356. CAN signals incl. power supply Screw clamp 10 pin without Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 16 with switch Screw clamp 5 pin green CAN signals incl. power supply Cable termination Colour Signals / Power supply Tolerances Information: Scale All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Date Fastening screw thread 1:1 Angaben zu entsprechender Ident-Nr. siehe Fertigungsunterlagen. For further information about I.D. number see manufacturing document. Designation Subject to modification without prior notice. Drawing will not be updated. ERbic horizontal reversed CAN General plan 324266 www.ERNI.com Index #4-40 UNC Class ERBIC I A3