ERbic Profibus with PU interface, horizontal, reversed ERbic Profibus, horizontal, reversed with switch with switch (switchable bus termination resistor) (switchable bus termination resistor) pin 1 8 4,5 - 4,5 - 8 pin 1 17,5 17,5 #4/40 UNC (inner thread) without switch 10 21,1 47,4 21,1 47,4 10 without switch #4/40 UNC 25 25 5,1 5,1 #4/40 UNC 35 35 with switch 44,8 switch 44,8 switch 64,6 144176 64,6 Screw clamp 4 pin Switch IDC terminal 2x2 pin pebble grey without A- and B Line 104577 Node Screw clamp 4 pin 104322 Termination Screw clamp 2 pin yellow Part number Type Cable termination Colour Programming interface (PU) #4-40 UNC Signals / Power Fastening supply screw thread 154842 Switch with IDC terminal 2x2 pin pebble grey Part number Type Programming interface (PU) Cable termination Colour Notes: 1. Operating temperature: -20°C / +70°C 2. Protection class: IP40 3. Sealing plate: Drawing number 103356. Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 134109 without switch pin 1 OFF ON ON 16 without switch OFF 16 with switch Tolerances Information: in mm Date 1:1 Angaben zu entsprechender Ident-Nr. siehe Fertigungsunterlagen. For further information about I.D. number see manufacturing document. Designation Subject to modification without prior notice. Drawing will not be updated. ERbic horiz.rev. Profibus General plan 324262 www.ERNI.com Index #4-40 UNC Signals / Power Fastening supply screw thread Scale All Dimensions All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. A- and B Line Class ERBIC I A2