53,34 ±0,20 2,100 ±0,008 6,90 0,272 IMPROVED CONTACT DESIGN (PRE BEND) 59,18 2,330 28,50 1,122 MAX 1 8 1 8 1 8 1 1 8 1 8 1 8 1 8 3,50 ±0,20 0,138 ±0,008 8 25,50 1,004 MAX 3 X 13,97 = 41,91 1,650 10,89 0,429 T e chnical sp e cif icat io ns Stan d ard ap p l i c . Standard description Standard description Thickness of plating Thickness of plating Standard description A sse mb l y p ro c e ss Packaging Solder temperature Suitable assembly process A p p ro v al s UL insulation body UL File No. RoHS compliant UL 94 Val ue T e st Data Stan d ard ap p l i c . Val ue PA66 Me c hani c al p ro p e rti e s . C5210 (acc.JIS) Insertion/withdrawal force IEC 603-7 max. 20 N 30 µin Au over 50 µin Ni Mechanical operations IEC 512-5, 9a min. 1.000 80 µin matte Sn over 50 µin Ni Effectiveness of connector SUS301 (acc.JIS) coupling device IEC 512-8, 15f 50 N 50 µin Ni / 80 µin Sn El e c tri c al p ro p e rti e s Cre e p ag e / c le aran c e d i stanc e s a) Contact - contact IEC 807-3 0,52 mm Tray b) Contact - shell IEC 807-3 min. 1,0 mm 235°C at 3-5s Vo l tag e p ro o f (Di e l e c tri c Wi th stan d Vo l tag e ) wave a) Contact - contact IEC 512-2, 4a min. 1.000 V AC/DC b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC Current carrying capacity IEC 512-3, 5b 1,5 A @ 25° C V0 Contact resistance IEC 512-2, 2a max. 30 mOhm E145613 Insulation resistance IEC 512-2, 3a min. 500 MOhm Yes En v i ro n me ntal p ro p e rti e s Operation temperature 0 - 70° C NOTE NOTE NOTE NOTE NOTE Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. Mate ri al s & F i n i sh Insulation body Contact material Contact finish, mating zone Contact finish termination zone Shell/shield material Plating shield / shielding pin 1: PANEL GROUND FLANGES TOP; SIDES 8 GF9) 2: REAR GROUNDING PIN BETWEEN EVERY PART 3: 3 SIDE GROUND PINS EACH SIDE; STAGGERED (S1) 1:1 4: RoHS COMPLIANT 5: C-UL APPROVED E145613 AND MEETS FCC REQUIREMENTS 2:1 Scale Tolerances Information: All Dimensions in mm[in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJD 8P8C, 2X4, CATEGORY 5 133046 www.ERNI.com c 25.06.2014 Index Date Class MJ I (1/2) A3 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED 52,07 2,050 40,64 1,600 38,10 1,500 RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT 26,67 1,050 24,13 0,950 2,54 0,100 1,27 0,050 0,8 10,16 0,400 4,57 0,180 9,15 0,360 60,06 ±0,13 2,365 ±0,005 1 8 8 1 3,25 0 ,128 X2 2,13 0,084 X9 2,13 0,084 TOP OF PCB LP 0,38 0,015 1 8 02 26,16 ±0,20 1,030 ±0,008 8 0 ,0 ±0 2,54 0,100 1 1 8 0 ,05 4 2,79 0,110 2,79 0,110 53,34 2,100 Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. 8 1,6 ±0 X6 3 , 06 11,40 0,449 8 5 0,0 35 0,0 8,89 0,350 15,46 0,609 17,19 0,677 8 1 1 1 9± 5,85 0,230 2,54 0,100 12,70 0,500 2 ,00 ±0 2:1 Scale Tolerances Information: All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJD 8P8C, 2X4, CATEGORY 5 133046 www.ERNI.com c 25.06.2014 Index Date Class MJ I (2/2) A3