109,22 ±0,13 4,300 ±0,005 IMPROVED CONTACT DESIGN (PRE BEND) 115,06 4,530 28,50 1,122 MAX 1 8 1 8 1 8 1 8 1 8 1 8 1 8 1 1 8 1 8 1 8 1 8 1 8 1 8 1 8 1 8 3,20 ±0,30 0,126 ±0,012 8 25,50 1,004 MAX 7 X 13,97 [,550] = (97,79 3,850 ) 10,89 0,429 T e chnical spe cif icat io ns Stan d ard ap p li c . Standard description Standard description Thickness of plating Thickness of plating Standard description A sse mb l y p ro c e ss Packaging Solder temperature Suitable assembly process A p p ro v al s UL insulation body UL File No. RoHS compliant UL 94 Val u e T e st Data Stan d ard ap p l i c . Val ue PA66 Me c h an i c al p ro p e rti e s . C5210 (acc.JIS) Insertion/withdrawal force IEC 603-7 max. 20 N 30 µin Au over 50 µin Ni Mechanical operations IEC 512-5, 9a min. 1.000 80 µin matte Sn over 50 µin Ni Effectiveness of connector SUS301 (acc.JIS) coupling device IEC 512-8, 15f 50 N 50 µin Ni / 80 µin Sn El e c tri c al p ro p e rti e s Cre e p ag e / c l e aran c e d i stan c e s a) Contact - contact IEC 807-3 0,52 mm Tray b) Contact - shell IEC 807-3 min. 1,0 mm 235°C at 3-5s Vo l tag e p ro o f (D i e l e c tri c Wi th stan d Vo l tag e ) wave a) Contact - contact IEC 512-2, 4a min. 1.000 V AC/DC b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC Current carrying capacity IEC 512-3, 5b 1,5 A @ 25° C V0 Contact resistance IEC 512-2, 2a max. 30 mOhm E145613 Insulation resistance IEC 512-2, 3a min. 500 MOhm Yes En v i ro n me n tal p ro p e rti e s Operation temperature 0 - 70° C NOTE 1: NOTE 2: NOTE 3: NOTE 4: Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. Mate ri al s & Fi n i sh Insulation body Contact material Contact finish, mating zone Contact finish termination zone Shell/shield material Plating shield / shielding pin PANEL GROUND FLANGES TOP, BOTTOM, SIDES (GF9) REAR GROUNDING PIN BETWEEN EVERY PORT [T] 3 SIDE GROUND PINS EACH SIDE, STAGGERED (S1) RoHS COMPLIANT 1:1 Scale Tolerances Information: All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJD 8P8C, 2X8, CATEGORY 5 133080 www.ERNI.com c 25.06.2014 Index Date Class MJ I (1/2) A3 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT 116,16 ±0,20 4,573 ±0,008 107,95 4,250 96,52 3,800 93,98 3,700 0,38 ±0,10 0,015 ±0,004 68,58 2,700 66,04 2,600 54,61 2,150 52,07 2,050 40,64 1,600 26,16 1,030 82,55 3,250 80,01 3,150 TOP OF PCB LP 38,10 1,500 9,15 0,360 2,54 0,100 12,70 0,500 1,27 0,050 10,16 0,400 8 1 1 4,57 0,180 ±0,07 0,128 8 8 1 1 0,89 3,25 8 ±0,00 3 X2 ±0,0 7 0,03 5 ±0,0 03 8 8 1 8 8 1 8 8 8 8 8 1 1 X 12 8 ±0 1 ,6 0 ,07 2,13 0,084 0 ,0 6 3 ,00 3 ±0 X10 2,13 0,084 2,79 0,110 11,40 0,449 8 1 1 8,89 0,350 8 1 1 5,85 0,230 8 1 1 2,54 0,100 1 1 2,79 0,110 109,22 4,300 1:1 Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. 2,54 0,100 24,13 0,950 15,46 0,609 17,19 0,677 26,66 1,050 1:1 Scale Tolerances Information: All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJD 8P8C, 2X8, CATEGORY 5 133080 www.ERNI.com c 25.06.2014 Index Date Class MJ I (2/2) A3