RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 8 14.72 [.580] 0.38±0.10 [.015±.004] L.E.D. 1 13.63 [.537] 1 PCB EDGE LP 3.20±0.20 [.126±.008] 21.59 [.850] MAX 15.88 [.625] L.E.D. 2 16.66 [.656] 10.89 [.429] 11.43±0.13 [.450±.005] NOTE 1: SIDE SHIELD TABS IN REAR 3.05mm (R) MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES ELECTRICAL CHARACTERISTICS CONTACT RESISTANCE: 30 MILLIOHMS MAX OPERATING TEMPERATURE: 0˚C TO 70˚C LED 1 RIGHT LED LED 2 LINK LED 1 RECHTE CODE YELLOW GREEN L1 MEASUREMENT Information:Nr.NO. Dimension Tolerances Scale All Dimensions in mm Consider protection memo from DIN 34 MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni TERMINAL FINISH: SnPb LED LENS: EPOXY LED 2 LEFT Subject to modification without All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Index Designation MOD JACK - MJIM prior notice. Drawing will not be updated. 8C8T, 1X1, INT. MAG., LED ALIGNED 203191 19FEB04 Modification Nr. Date - www.ERNI.com a 2:1 MAT'L Name Plot At - Group/Type MAXMJ RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENER FUER LEITERPLATTE (BESTUECKUNGSSEITE) TOL ±0.05 [.002] UNLESS NOTED 1.27 [.050] 0.64 [.025] 2.54 [.100] 8 ˚.035±.003] X8 8.89 [.350] ˚0.89±0.07 [ ˚3.25±0.07 [ ˚.128±.003] X2 ˚1.02±0.07 [ 11 12 9 10 ˚.040±.003] X4 8.18 [.322] 3.05 [.120] ˚.063±.003] X2 4.06 [.160] ˚1.60±0.07 [ 2.54 [.100] 1 11.43 [.450] 13.26 [.522] 15.49 [.610] ELECTRICAL SCHEMATIC M3D01 ELEKTRISCHES DIAGRAMM PCB CABLE P1 J1 CT P4 P2 J2 P3 J3 CT P5 P6 J6 N/C P7 J4,5 GND P8 J7,8 1000pF/2KV 4X 75 W MAGNETICS SPECIFICATIONS @ 25˚C AUTO MDIX COMPATIBLE LED SPECIFICATIONS TURNS RATIO: (P1-P2 : J1-J2) 1CT : 1 ±3% (P3-P6 : J3-J6) 1CT : 1 ±3% LED ANWEISUNG OCL(100 KHz, 0.1 Vrms, 8 mA) (P1-P2 : P3-P6) 350µH MIN INSERTION LOSS: 0.1-100 MHz RETURN LOSS: 0.5 - 30 MHz: 40 MHz: 50 MHz 60 - 80 MHz CROSSTALK: 1-100 MHz 0.9 OHMS MAX V f I f CIRCUIT DIAGRAM f SCHALTSKIZZE FARBE TYP MAX mA YELLOW 2.1 2.5 20 9 10 11 12 GREEN 2.2 2.5 20 9 10 11 12 -1.1 dB MAX -18 dB MIN -15.5 dB MIN -13.6 dB MIN -12 dB MIN -40 dB TYP CMR: 0.1 - 30 MHz 30 - 60 MHz 60 - 100 MHz -50 dB TYP -40 dB TYP -35 dB TYP ISOLATION 1500 Vrms INFORMATION: Tolerances Scale 2:1 - MAT'L All Dimensions - in mm [in] Consider protection memo from DIN 34 DCR (P1-P2, P3-P6) V COLOR All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without Designation MOD JACK - MJIM prior notice. Drawing will not be updated. 8C8T, 1X1, INT. MAG., LED ALIGNED 203191 www.ERNI.com a 19FEB04 Rev. Date Group/Type MAXMJ I