RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 14.89 [.586] 21.59 [.850] MAX 0.38±0.10 [.015±.004] 32.22±0.20 [1.269±.008] TOP OF PCB LP 31.12 [1.225] 8 1 8 13.80 [.543] 1 3.20±0.20 [.126±.008] 13.97 [.550] NOTE 1: ONE REAR SHIELD TAB CENTERED NOTE 2: SIDE GROUND TAB REAR OF PEG 3.05 mm (R) NOTE 3: PANEL GROUND FLANGES BOTH SIDES, BOTTOM AND TOP (GF5) LED 2 LED 1 10.89 [.429] NO. IDENT. NR. LED 2 LEFT LED 2 LINK LED 1 RIGHT LED 1 RECHTE LED CODE 25.40±0.13 [1.000±.005] MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES ELECTRICAL CHARACTERISTICS CONTACT RESISTANCE: 30 MILLIOHMS MAX OPERATING TEMPERATURE: 0˚C TO 70˚C Information: YELLOW GREEN L1 203313 GREEN YELLOW L2 203314 GREEN GREEN L3 203315 GREEN RED L4 203316 ORANGE/GREEN ORANGE/GREEN L9 Tolerances Scale 2:1 - All Dimensions in mm Consider protection memo from DIN 34 MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni TERMINAL FINISH: SnPb LED LENS: EPOXY 203312 All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. - Index Date MOD JACK - MJIM 8C8T, 1X2, INT. MAG., LED www.ERNI.com - Designation 203311 MAXMJ I RECOMMENDED PCB LAYOUT - COMPONENT SIDE VIEW EMPFOHLENER FUER LEITERPLATTE - BESTUCKUNGSSEITE ALL TOLERANCES ±0.05 UNLESS NOTED 25.40 [1.000] 24.13 [.950] 1.27 [.050] 10.16 [.400] J1 ˚0.89±0.07 [ CT P5 P6 J6 N/C P7 J4,5 GND P8 ˚1.60±0.07 [ ˚.063±.003] X3 8 1 8 1 2.54 [.100] ˚3.25±0.07 [ ˚.128±.003] X2 ˚1.02±0.07 [ ˚.040±.003] X8 9 10 11 11 12 9 10 12 J7,8 1000pF/2KV 4X 75 W 2.73 [.107] 10.16 [.400] J3 8.89 [.350] J2 P3 2.73 [.107] ˚.035±.003] X16 3.05 [.120] CT P4 P2 2.29 [.090] P1 2.54 [.100] 12.70 [.500] CABLE 4.06 [.160] ELEKTRISCHES DIAGRAMM PCB 2.54 [.100] ELECTRICAL SCHEMATIC M3D01 0.76 [.030] 9.65 [.380] 13.21 [.520] 23.62 [.930] LED SPECIFICATIONS LED ANWEISUNG MAGNETICS SPECIFICATIONS @ 25˚C AUTO MDIX COMPATIBLE TURNS RATIO: (P1-P2 : J1-J2) 1CT : 1 ±3% (P3-P6 : J3-J6) 1CT : 1 ±3% OCL(100 KHz, 0.1 Vrms, 8 mA) (P1-P2 : P3-P6) 350µH MIN INSERTION LOSS: 0.1-100 MHz RETURN LOSS: 0.5 - 30 MHz: 40 MHz: 50 MHz 60 - 80 MHz CROSSTALK: 1-100 MHz 0.9 OHMS MAX -1.1 dB MAX -18 dB MIN -15.5 dB MIN -13.6 dB MIN -12 dB MIN -40 dB TYP CMR: 0.1 - 30 MHz 30 - 60 MHz 60 - 100 MHz -50 dB TYP -40 dB TYP -35 dB TYP ISOLATION 1500 Vrms Vf TYP Vf MAX If mA YELLOW 2.1 2.5 20 9 10 11 12 GREEN 2.2 2.5 20 9 10 11 12 RED 2.25 2.5 20 9 10 11 12 9 10 G 11 12 G N N ORANGE/GREEN Information: 2.05/2.2 Tolerances All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Scale Subject to modification without prior notice. Drawing will not be updated. - Index Date CIRCUIT DIAGRAM SCHALTSKIZZE 20 2:1 - Designation MOD JACK - MJIM 8C8T, 1X2, INT. MAG., LED www.ERNI.com - 2.5 All Dimensions in mm SCHEMATIC NO: M3D01 Consider protection memo from DIN 34 DCR (P1-P2, P3-P6) COLOR FARBE 203311 MAXMJ I