RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT TOP OF PCB LP 14,89 0,586 21,59 0,850 MAX 0,38 ±0,10 0,015 ±0,004 60,19 ±0,20 2,370 ±0,008 59,09 2,326 8 1 LED 2 8 1 LED 1 8 1 8 B 13,80 0,543 1 3,05 ±0,50 0,120 ±0,020 6 x 6.99 [0.275] = (41.94 [1.651]) NOTE 1: REAR SHIELD TABS BETWEEN EACH PORT (T) NOTE 2: SIDE GROUND TAB REAR OF PEG 3.05 mm (R) NOTE 3: PANEL GROUND FLANGES BOTH SIDES, BOTTOM AND TOP (GF5) 10,89 0,429 53,34 ±0,13 2,100 ±0,005 LED 2 LEFT LED 2 LINKS LED 1 RIGHT LED 1 RECHTS LED CODE a 203294 YELLOW GREEN L1 a 203295 GREEN YELLOW L2 a 203296 GREEN GREEN L3 a 203297 GREEN RED L4 a 203298 RED GREEN L5 203282 YELLOW YELLOW L8 203299 ORANGE/GREEN ORANGE/GREEN L9 a Tolerances Information: SCHEMATIC NO: M3D01 1:1 Scale All Dimensions in mm Designation Consider protection memo from DIN 34 MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni TERMINAL FINISH: Sn MATTE B LED LENS: EPOXY MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES ELECTRICAL CHARACTERISTICS CONTACT RESISTANCE: 30 MILLIOHMS MAX OPERATING TEMPERATURE: 0°C TO 70°C NO. IDENT.-NR. All rights reserved. Only for Information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. B 09.06.2008 Index Date Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJIM 8C8T, 1x4, INT. MAG., LED 203293 www.ERNI.com Class MJIM I (1/2) A3 RECOMMENDED PCB LAYOUT - COMPONENT SIDE VIEW EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTÜCKUNGSSEITE) ELECTRICAL SCHEMATIC M3D01 ALL TOLERANCES ±0.05 [.002] UNLESS NOTED ELEKTRISCHER SCHALTPLAN PCB 52,07 2,050 40,64 1,600 38,10 1,500 1,27 0,050 2,54 0,100 24,13 0,950 12,70 0,500 0,89 ±0,07 0,035 ±0,003 10,16 0,400 8 1 1 2.54 [.100] 9 10 9 10 8 1 P3 CT P5 P6 J3 J2 J6 X5 J4,5 J7,8 GND P8 1 1000pF/2KV X16 2,73 0,107 0,76 0,030 11 12 9 10 2,73 0,107 LED SPECIFICATIONS 13,21 0,520 AUTO MDIX COMPATIBLE 27,18 1,070 37,59 1,480 41,15 1,620 1CT : 1 ±3% 1CT : 1 ±3% OCL(100 KHz, 0.1 Vrms, 8 mA) (P1-P2 : P3-P6) 350µH MIN DCR (P1-P2, P3-P6) 0.9 OHMS MAX INSERTION LOSS: 0.1-100 MHz -1.1 dB MAX RETURN LOSS: 0.5 - 30 MHz: 40 MHz: 50 MHz 60 - 80 MHz -18 dB MIN -15.5 dB MIN -13.6 dB MIN -12 dB MIN CROSSTALK: 1-100 MHz -40 dB TYP CMR: 0.1 - 30 MHz 30 - 60 MHz 60 - 100 MHz -50 dB TYP -40 dB TYP -35 dB TYP ISOLATION 1500 Vrms LED ANWEISUNG a 23,62 0,930 TURNS RATIO: (P1-P2 : J1-J2) (P3-P6 : J3-J6) Ohms B 11 12 9,65 0,380 MAGNETICS SPECIFICATIONS @ 25°C 4X 75 9 10 11 12 11 12 8 1,60 ±0,07 0,063 ±0,003 2,29 0,090 1,02 ±0,07 0,040 ±0,003 X2 J1 N/C P7 8 3,25 ±0,07 0,128 ±0,003 X32 P1 CT P4 P2 4,06 0,160 2,54 0,100 8,89 0,350 3,05 0,120 10,16 0,400 26,67 1,050 CABLE 51,56 2,030 53,34 2,100 Information: COLOR FARBE Vf TYP Vf MAX If mA YELLOW 2.1 2.5 20 9 10 11 12 GREEN 2.2 2.5 20 9 10 11 12 RED 2.25 2.5 20 9 10 11 12 ORANGE/GREEN 2.05/2.2 2.5 20 9 10 G 11 12 G N N Tolerances CIRCUIT DIAGRAM SCHALTSKIZZE 1:1 Scale All Dimensions in mm Consider protection memo from DIN 34 Designation All rights reserved. Only for Information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJIM 8C8T, 1x4, INT. MAG., LED 203293 www.ERNI.com Class MJIM I (2/2) A3