21.59/ [.850] MAX 1 8 L.E.D. 1 0,54 13,63 L.E.D. 2 0,12 ±0,02 3,05 ±0,50 0,63 15,88 (SEE NOTE 3) 0,45 ±0,01 11,43 ±0,13 0,43 10,89 SEE NOTE 3 PCB EDGE LP 0,58 14,72 0,01 ±0,00 0,38 ±0,10 RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 0,66 16,66 NOTE 1: SIDE SHIELD TABS IN REAR 3.05mm (R) NOTE 2: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5) NOTE 3: APPLICABLE FOR PART 203503: - NO LED PINS - SHIELD ON FRONT SIDE WITHOUT LED OPENINGS LED 2 LEFT LED 2 LINK LED 1 RIGHT LED 1 RECHTE LED CODE 203503 None None None 203336 YELLOW GREEN MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni TERMINAL FINISH: Sn matte LED LENS: EPOXY MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES ELECTRICAL CHARACTERISTICS CONTACT RESISTANCE: 30 MILLIOHMS MAX OPERATING TEMPERATURE: -40°C TO 85°C Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. NO. IDENT. NR. Tolerances Information: SCHEMATIC NUMBER: H3D02 All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Scale 24.04.2008 Index Date 2:1 - All Dimensions in mm [in] Designation MOD JACK - MJIM Subject to modification without prior notice. Drawing will not be updated. 8C8T, 1X1, INT. MAG., LED ALIGNED 203504 www.ERNI.com B L1 Class MAXMJ (1/2) A3 ELECTRICAL SCHEMATIC - 10/100 BASE TX - H3D02 EXTENDED TEMPERATURE RANGE ELEKTRISCHES DIAGRAMM PCB CABLE J1 P1 CT P2 P3 J2 P4 J3 CT P5 J6 P6 N/C P7 J4,5 J7,8 GND P8 4X 75 1000pF/2KV Ohms RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENER FUER LEITERPLATTE (BESTUECKUNGSSEITE) TOL ±0.05 [.002] UNLESS NOTED 0,05 1,27 0,03 0,64 0,10 2,54 0,04 ±0,00 0,89 ±0,07 X8 8 0,06 ±0,00 1,60 ±0,07 X2 1 0,00 0,13 ± 0,07 X2 ± 3,25 0,12 3,05 0,10 2,54 0,35 8,89 9 10 0,16 4,06 0 ±0,0 7 X4 0,04 2 ±0,0 0 1, 3) OTE EN E S ( 11 12 0,32 8,18 0,45 11,43 0,52 13,26 0,61 15,49 MAGNETICS SPECIFICATIONS @ 25°C AUTO MDIX COMPATIBLE TURNS RATIO: LED SPECIFICATIONS (P1-P3 : J1-J2) 1CT : 1 ±3% (P4-P6 : J3-J6) 1CT : 1 ±3% LED ANWEISUNG OCL (100KHz, 0.1Vrms, 8mA) (P1-P3 : P4-P6) DCR (P1-P3, P4-P6) Vf TYP Vf MAX If mA CIRCUIT DIAGRAM SCHALTSKIZZE YELLOW 2.1 2.5 20 9 10 11 12 GREEN 2.2 2.5 20 9 10 11 12 1.1 OHMS MAX INSERTION LOSS: 0.1 MHz - 100 MHz COLOR FARBE 350µH MIN -1.1 dB MAX 0.5 MHz - 30 MHz -18 dB MIN 40 MHz -15.5 dB MIN 50 MHz -13.6 dB MIN 60 MHz - 80 MHz -12 dB MIN CROSSTALK (0.1 MHz - 100 MHz): -40 dB TYP COMMON MODE REJECTION 0.1 MHz - 30 MHz: -50 dB TYP 30 MHz - 60 MHz: -40 dB TYP 60 MHz - 100 MHz: ISOLATION: -35 dB TYP 1500 Vrms Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. RETURN LOSS: Information: Tolerances 1:1 Scale - All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation MOD JACK - MJIM Subject to modification without prior notice. Drawing will not be updated. 8C8T, 1X1, INT. MAG., LED ALIGNED 203504 www.ERNI.com Class MAXMJ I (2/2) A3