RECOMMENDED PANEL CUTOUT 60,19 ±0,20 2,370 ±0,008 0,38 ±0,10 0,015 ±0,004 TOP OF PCB LP 14,89 0,586 21,59 0,850 MAX EMPFOHLENER FRONTPLATTEN AUSSCHNITT 59,09 2,326 8 1 8 L.E.D. 2 1 8 1 8 13,80 0,543 1 3,05 ±0,50 0,120 ±0,020 6 x 6.99 [0,275] = (41.94 [1.651]) 10,89 0,429 L.E.D. 1 53,34 ±0,13 2,100 ±0,005 NOTE 1: REAR SHIELD TABS BETWEEN EACH PORT (T) NOTE 2: SIDE GROUND TAB REAR OF PEG 3.05 mm (R) NOTE 3: PANEL GROUND FLANGES BOTH SIDES, BOTTOM AND TOP (GF5) MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni TERMINAL FINISH: Sn MATTE LED LENS: EPOXY MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES OPERATING TEMPERATURE: -40°C TO 85°C Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. NOTE 4: RoHS COMPLIANT NO. IDENT.-NR. LED 2 LEFT LED 2 LINKS LED 1 RIGHT LED 1 RECHTS LED CODE 203340 GREEN GREEN L3 2:1 Scale Tolerances Information: SCHEMATIC NO: H3D01 All Dimensions in mm [in] All rights reserved. Only for Information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJIM 8C8T, 1x4, INT. MAG., LED 203340 www.ERNI.com C 24.04.2008 Index Date Class MJIM I (1/2) A3 RECOMMENDED PCB LAYOUT - COMPONENT SIDE VIEW EMPFOHLENER FUER LEITERPLATTE - BESTUECKUNGSSEITE ALL TOLERANCES ±0.05 [.002] UNLESS NOTED ELECTRICAL SCHEMATIC - 10/100 BASE TX - H3D01 EXTENDED TEMPERATURE RANGE ELEKTRISCHER SCHALTPLAN 52,07 2,050 40,64 1,600 38,10 1,500 PCB 26,67 1,050 1,27 0,050 10,16 0,400 CT P4 0,89 ±0,07 0,035 ±0,003 x 32 1,60 ±0,07 0,063 ±0,003 x 5 8 1 8 1 8 1 8 1 2,54 0,100 10 11 P3 J3 CT P5 J6 P6 10 J4,5 11 12 10 12 11 GND P8 12 9 10 11 12 2,29 0,090 9 J2 N/C P7 9 3,25 ±0,07 0,128 ±0,003 x 2 P2 1,02 ±0,07 0,040 ±0,003 x 16 2,73 0,107 0,76 0,030 J7,8 4 x 75 Ω 1000pF/2KV 4,06 0,160 9 J1 P1 2,54 0,100 12,70 0,500 2,54 0,100 8,89 0,350 10,16 0,400 3,05 0,120 24,13 0,950 CABLE 2,73 0,107 9,65 0,380 13,21 0,520 23,62 0,930 27,18 1,070 MAGNETICS SPECIFICATIONS @ 25°C 37,59 1,480 41,15 1,620 AUTO MDIX COMPATIBLE TURNS RATIO: 51,56 2,030 (P1-P2 : J1-J2) 1CT : 1 ±3% (P3-P6 : J3-J6) 1CT : 1 ±3% 53,34 2,100 LED SPECIFICATIONS LED ANWEISUNG OCL (100KHz, 0.1Vrms, 8mA) (P1-P2 : P3-P6) DCR (P1-P2, P3-P6) 350µH MIN 1.1 OHMS MAX INSERTION LOSS: 0.1 MHz - 100 MHz -1.1 dB MAX 40 MHz -18 dB MIN -15.5 dB MIN 50 MHz -13.6 dB MIN 0.5 MHz - 30 MHz 60 MHz - 80 MHz -12 dB MIN CROSSTALK (0.1 MHz - 100 MHz): -40 dB TYP COMMON MODE REJECTION -50 dB TYP 0.1 MHz - 30 MHz: 30 MHz - 60 MHz: -40 dB TYP 60 MHz - 100 MHz: ISOLATION: -35 dB TYP 1500 Vrms Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. RETURN LOSS: Information: COLOR FARBE Vf TYP Vf MAX mA GREEN 2.2 2.5 20 Tolerances If CIRCUIT DIAGRAM SCHALTPLAN 9 10 11 12 2:1 Scale All Dimensions in mm [in] All rights reserved. Only for Information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJIM 8C8T, 1x4, INT. MAG., LED 203340 www.ERNI.com Class MJIM I (2/2) A3