21.59 [.850] MAX #7 TERMINAL REMOVED ANSCHLUSS ABGESCHNITTEN 8 13.63 [.537] 1 3.20±0.20 [.126±.008] 15.88 [.625] 10.89 [.429] 11.43±0.13 [.450±.005] RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENER FUER LEITERPLATTE (BESTUECKUNGSSEITE) RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT TOL ±0.05 [.002] UNLESS NOTED 0.38±0.10 [.015±.004] 0.64 [.025] 2.54 [.100] 8 ø0.89±0.07 [ ø.035±.003] X8 14.72 [.580] 16.66 [.656] 1.27 [.050] PCB EDGE LP ø3.25±0.07 [ ø.128±.003] X2 11.43 [.450] 8.89 [.350] ø.063±.003] X2 2.54 [.100] ø1.60±0.07 [ 3.05 [.120] 1 15.49 [.610] ELECTRICAL SCHEMATIC - 10/100 BASE TX - H3D01 EXTENDED TEMPERATURE RANGE ELEKTRISCHES DIAGRAMM CABLE MAGNETICS SPECIFICATIONS @ 25˚C AUTO MDIX COMPATIBLE PCB TURNS RATIO: (P1-P2 : J1-J2) 1CT : 1 ±3% (P3-P6 : J3-J6) 1CT : 1 ±3% P1 OCL (100KHz, 0.1Vrms, 8mA) (P1-P2 : P3-P6) DCR (P1-P2, P3-P6) 350µH MIN 1.1 OHMS MAX P2 J2 P3 J3 CT P5 INSERTION LOSS: 0.1 MHz - 100 MHz J1 CT P4 P6 J6 -1.1 dB MAX RETURN LOSS: 0.5 MHz - 30 MHz -18 dB MIN 40 MHz -15.5 dB MIN 50 MHz -13.6 dB MIN 60 MHz - 80 MHz -12 dB MIN J4,5 GND P8 J7,8 1000pF/2KV 4X 75 W CROSSTALK (0.1 MHz - 100 MHz): -40 dB TYP COMMON MODE REJECTION 0.1 MHz - 30 MHz: -50 dB TYP 30 MHz - 60 MHz: -40 dB TYP 60 MHz - 100 MHz: ISOLATION: -35 dB TYP 1500 Vrms NOTE 1: SIDE SHIELD TABS IN REAR 3.05mm (R) NOTE 2: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5) MATERIALS AND FINISH Information: Tolerances HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK TERMINAL FINISH: SnPb MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES OPERATING TEMPERATURE: -40˚C TO 85˚C Consider protection memo from DIN 34 CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni Class. No. All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. 02JUL04 Index Date Designation MOD JACK - MJIM 8C7T, 1X1, INTEGRATED MAGNETICS www.ERNI.com b - - All Dimensions in mm SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE 2:1 Scale 203338 MAXMJ I