1 8 L.E.D. 1 14,72 0,58 0,38 ±0,10 0,01 ±0,00 PCB EDGE LP 8,00 mm max. 13,63 0,54 L.E.D. 2 16,66 0,66 3,05 ±0,5 0,12 ±0,02 15,88 0,63 2,00 mm nominal 21,59 0,85 MAX RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 11,43 0,45 3,20 max. 10,89 0,43 Note 1: IEEE 802.3u compliant integrated magnetics Note 2: Compatible to lead-free wave soldering process Note 3: RoHS compliant; print "RC" with date code Note 4: Side shield tabs in rear 3,05 mm (R) Note 5: Panel ground flanges both sides botton and top (GF5) MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES ELECTRICAL CHARACTERISTICS CONTACT RESISTANCE: 30 MILLIOHMS MAX OPERATING TEMPERATURE: 0°C TO 70°C Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH 40 µin Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni TERMINAL FINISH: Sn MATTE LED LENS: EPOXY Information: Schematic number: M3DY1 Part No. LED 2 LED 1 LED CODE 203339 YELLOW GREEN L1 Tolerances ±0,2 mm if not specified Scale 2:1 All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. Mod Jack - MJIM 8C8T, 1x1, INT, MAG, LED ALIGNED 203516 www.ERNI.com Class MJIM I (1/2) A3 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENER FUER LEITERPLATTE (BESTUECKUNGSSEITE) TOL ±0.05 [.002] UNLESS NOTED ELECTRICAL SCHEMATIC M3DY1 1,27 0,05 0,64 0,03 2,54 0,10 2 1 3 6 5 CT P4 TD- P2 J1 TX+ J2 TX- 1.41:1 RD+ P3 7 CABLE 1.41:1 TD+ P1 8 J3 RX+ CT P5 8,18 0,32 8,89 0,35 10 2,54 0,10 9 RD- P6 12 3,05 0,12 11 4,06 0,16 X8 ±0,00 0,04 7 ,0 ±0 0,89 X2 0,00 ,06 ± 0 7 2 0,0 0 X 1,60 ± 3 ±0,0 ,1 0 ±0,07 X4 3,25 ±0,00 0,04 7 ,0 0 1,02 ± 4 ELEKTRISCHES DIAGRAMM PCB J6 RX- N/C P7 J4,5 J7,8 GND P8 1000pF/2KV 4X 75 W 11,43 0,45 13,26 0,52 15,49 0,61 MAGNETICS SPECIFICATIONS @ 25°C TURNS RATIO: (P1-P2 : J1-J2) 1.41CT : 1 ±3% (P3-P6 : J3-J6) 1.41CT : 1 ±3% LED SPECIFICATIONS OCL(100 KHz, 0.1 Vrms, 8 mA) (P1-P2 : P3-P6) 350µH MIN RETURN LOSS: 60 - 80 MHz CROSSTALK: -18 dB MIN -15.5 dB MIN -13.6 dB MIN -10 dB MIN 1-100 MHz CMR: -40 dB TYP 0.1 - 30 MHz 30 - 60 MHz 60 - 100 MHz ISOLATION -50 dB TYP -40 dB TYP -35 dB TYP 1500 Vrms Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 0.5 - 30 MHz: 40 MHz: 50 MHz Information: Schematic number: M3DY1 Vf TYP Vf MAX If mA green 2.2 2.5 20 yellow 2.1 2.5 20 COLOR FARBE Tolerances ±0,2 mm if not specified Scale CIRCUIT DIAGRAM SCHALTSKIZZE 9 10 9 10 11 12 11 12 1:1 All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. Mod Jack - MJIM 8C8T, 1 x 1, INT, MAG, LED ALIGNED 203516 www.ERNI.com Class MJIM I (2/2) A3