RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED 0 0 ,9 2,04 0,08 X2 7 1 12,70 0,50 1,02 0,04 1,78 0,07 13,75 0,56 0 276 ±0,00 2,54 0,10 0,126 3 1,78 0,07 0,07 ±0,00 2 4,32 0,17 3,20 ± 0,063 8 2,54 0,10 3,43 0,14 1,60 ±0,07 X2 RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT ) (x8 17,0 0,67 3,10 0,12 10,00 0,39 4,0 0,16 1,20 0,05 6,80 0,25 [0,267±0,01] 16,50 0,25 [0,649±0,001] 2,54 0,10 [0,102±0,01] 15,75 0,25 [0,62±0,01] 13,68 ,25 [0,526±0,01] 12,70 0,50 13,25 0,25 [0,522±0,01] 2,78 0,11 1:1 3,38 0,03 [0,0242±0,001] 5,40 0,2 [0,212±0,008] 3,43 0,2 [0,135±0,008] 1,20 0,05 Assembly Process Packaging Solder temperature Suitable assembly process Tray 260°C at 3-5s wave Approvals UL insulation body UL File No. RoHS compliant V0 E145613 Yes Mechanical properties Insertion/withdrawal force Mechanical operations Effectiveness of connector coupling device IEC 512-8, 15f Electrical properties Creepage / clearance distances a) Contact - contact IEC 807-3 b) Contact - shell IEC 807-3 Voltage proof (Dielectric Withstand Voltage) a) Contact - contact IEC 512-2, 4a min. b) Contact - shell/ testpane IEC 512-2, 4a min. Current carrying capacity IEC 512-3, 5b Contact resistance IEC 512-2, 2a max. Insulation resistance IEC 512-2, 3a min. Environmental properties Operation temperature Notes: Cavity confirms to FCC Rules and Regulations Part 68, Subpart F Std. applicable IEC 603-7 max. 20 N IEC 512-5, 9a min. 1.000 NO. IDENT. NR. 50 N 203530 0,52 mm min 1,0 mm 1.000 V AC/DC 1.500 V AC/DC 1.5 A @ 25°C 30 mOhm 500 MOhm -40 to +85°C Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. Technical specifications Materials & Finish Insulation body PA46 GF30 Contact material Phosphor Bronze (C5210) Contact finish, mating zone 30µin Au Contact finish, termination zone Au flash Underplating 20-50µin Ni Shell/shield material C2680 (acc. JIS) Shell/shield plating 20-50µin Ni Tolerances Information: x 0,50 x.x 0,38 x.xx 0,25 All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Scale in mm Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK- MJE 8P8C, 1X1 203529 www.ERNI.com 11.12.2013 Index Date 2:1 All Dimensions Class MJ I (1/1) A3