51,17 2,015 8,89 0,350 0,90 15,60 0,614 8,89 0,350 1,27 0,050 0,035 3,20 0,51 [0,12 0,02] 2,90 0,114 2 1,70 3,70 0,146 16,50 0,650 1 4 3 6 5 8 7 2 1 4 3 6 5 2 8 7 1 4 3 6 5 8 7 2 1 4 3 6 5 8 7 6 3,20 0,12 0,067 41,08 1,617 51,17 2,015 3,68 0,145 2,54 0,100 8 1 8 1 8 1 8 RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT 5,85 0,230 6,35 0,250 56,50 2,224 16,10 0,634 1 2,20 0,087 3,68 0,145 1,27 0,050 6,35 0,250 2,54 0,100 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED 13,70 x 3 = 41,08 1,617 56,00 0,35 [2,20 0,01] Assembly Process Packaging Solder temperature Suitable assembly process Tray 240°C at 3-5s wave Approvals UL insulation body UL File No. RoHS compliant V0 E145613 Yes Mechanical properties Insertion/withdrawal force Mechanical operations Effectiveness of connector coupling device Std. applicable IEC 603-7 max. 20 N IEC 512-5, 9a min. 1.000 IEC 512-8, 15f Electrical properties Creepage / clearance distances a) Contact - contact IEC 807-3 b) Contact - shell IEC 807-3 Voltage proof (Dielectric Withstand Voltage) a) Contact - contact IEC 512-2, 4a min. b) Contact - shell/ testpane IEC 512-2, 4a min. Current carrying capacity IEC 512-3, 5b Contact resistance IEC 512-2, 2a max. Insulation resistance IEC 512-2, 3a min. Environmental properties Operation temperature NOTE 1: C-UL APPROVED E145613 AND MEETS FCC REQUIREMENTS NOTE 2: RoHS COMPLIANT PART NO. IDENT. NR. 50 N TRANSMISSION REQUIREMENT ÜBERTRAGUNGSANFORDERUNG 203540 0,52 mm min 1,0 mm 1.000 V AC/DC 1.500 V AC/DC 1.5 A @ 25°C 30 mOhm 500 MOhm -40 to +85°C Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. Technical specifications Materials & Finish Insulation body PBT Contact material Phosphor Bronze (C5210) Contact finish, mating zone 30µin Au Contact finish, termination zone 150-200µin Sn matte Underplating 50-100µin Ni Shell/shield material C2680 (acc. JIS) Shell/shield plating 30µin Ni CATEGORY 3/4 Tolerances x 0,50 x.x 0,38 x.xx 0,25 Information: All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Scale in mm Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJV 8P8C, 1 x 4, VERTICAL 203539 www.ERNI.com 11.12.2013 Index Date 2:1 All Dimensions Class MJ (1/1) A3