RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) UNLESS NOTED 0,25 RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT 1,27 ±0,25 0,050 ±0,010 0,635 ±0,10 0,025 ±0,004 0,90 14,72 0,580 21,20 0,835 0,38 ±0,10 0,015 ±0,004 16,66 0,656 PCB EDGE LP 1,60 3,20 ±0,25 5 0,06 ±0, 010 3 ±0,0 0,126 10 ±0,010 X8 8 X2 X2 1 8,89 ±0,25 0,350 ±0,010 11,43 ±0,25 0,450 ±0,010 2,54 ±0,25 0,100 ±0,010 3,05 ±0,25 0,120 ±0,010 3,60 0,142 8 13,60 0,535 1 ±0,2 2,54 ±0,25 0,100 ±0,010 0,03 5 0,25 3,25 ±0,25 0,128 ±0,010 15,90 0,626 ±0, 25 15,49 ±0,25 0,610 ±0,010 2,54 0,100 0,2 1,00 0,039 11,43 ±0,25 0,450 ±0,010 2,86 0,113 1:1 8,90 0,350 3,05 0,120 0,25 10,89 0,429 NOTE 1: SIDE SHIELD TABS REAR OF PEG (3.05 mm) NOTE 2: PANEL GROUND FLANGES BOTH SIDES, TOP AND BOTTOM (GF5) NOTE 3: RoHS COMPLIANT Value PART NO. IDENT. NR. TRANSMISSION REQUIREMENT ÜBERTRAGUNGSANFORDERUNG 20 N 1.000 133155 CAT 3/4 Standard applic. Standard description Standard description Thickness of plating Thickness of plating Standard description Asse mbly pro ce ss Packaging Solder temperature Suitable assembly process Appro vals UL insulation body UL File No. RoHS compliant Value PA46 CuSn5 30 µin Au over 50 µin Ni Flash Au over 50 µin Ni C2680 (acc. JIS) 50 µin Ni / 80 µin Sn Tray 235°C at 3-5s wave UL 94 V0 E145613 Yes T e st Dat a St andard applic. Mechanical pro pertie s Insertion/withdrawal force IEC 603-7 max. Mechanical operations IEC 512-5, 9a min. Effectiveness of connector coupling device IEC 512-8, 15f Ele ct rical pro pe rtie s Cre e page / cle arance distance s a) Contact - contact IEC 807-3 b) Contact - shell IEC 807-3 Vo lt age pro o f (Die le ct ric Wit hstand Vo lt age ) a) Contact - contact IEC 512-2, 4a min. b) Contact - shell/testpanel IEC 512-2, 4a min. Current carrying capacity IEC 512-3, 5b Contact resistance IEC 512-2, 2a max. Insulation resistance IEC 512-2, 3a min. Environme nt al pro pe rt ie s Operation temperature 50 N 0,52 mm min. 1,0 mm 1.000 V AC/DC 1.500 V AC/DC 1,5 A @ 25° C 30 mOhm 500 MOhm 0 - 70° C Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. Technical specifications Mate rials & Finish Insulation body Contact material Contact finish, mating zone Contact finish termination zone Shell/shield material Plating shield / shielding pin PCB HOLE NUMBERING LP BOHRUNGSNUMERIERUNG 2 1 4 3 6 5 8 7 Scale Tolerances Information: 2:1 All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJR 8P8C, 1X1 203446 www.ERNI.com b 07.05.2015 Index Date Class MJ I (1/1) A3