Radial Leaded, Epoxy Dipped, Multilayer Ceramic Capacitors RD Series MERITEK MERITEK Radial Leaded, Epoxy Dipped Multilayer Ceramic Capacitors are constructed with a moisture and shock resistant epoxy coating, and can be supplied in bulk or tape and reel packaging for automatic insertion in printed circuit boards. They have a wide range of applications in computers, data processors, telecommunication, industrial controls and instrumentation equipment, etc. PART NUMBERING SYSTEM RD 15 YV 104 Z 500 RR Meritek Series Size Dielectric CODE CG NPO XR X7R YV Y5V Capacitance Code CODE (pF) (μF) 101 100 ---- 223 22000 0.022 104 100000 0.1 Tolerance CODE J ± 5% K ±10% M ±20% 101 100V 201 200V Z +80% to –20% Rated Voltage CODE 500 50V Packaging CODE Blank Bulk RR Radial Leaded, Reel Package Size Code and Dimensions in mm (inches) Lead Spacing 2.5 + 0.8 (.10 + 0.032) RD15 RD20 4.06 (.160)max. 5.08 (.200)max. 3.81(.150) 5.08(.200) max 1.50(.060) max 1.50(.060) 25.4(1.00) max. 25.4(1.00) max. max 5.0 + 0.8 (.20 + 0.032) max RD16 RD21 4.06 (.160)max. 5.08 (.200)max. 3.81max. 7.60(.300) 5.08max. 7.60(.300) (.150) max. (.200) max. 25.4(1.00) 25.4(1.00) max max RD30 7.60 (.300)max. 5.0 + 0.8 (.20 + 0.032) Lead length can be cut upon customer's request. 7.60(.300) max. 1.50(.060) max. 25.4(1.00) Standard cut lead lengths are: 3.3 + 0.8(.13 + .03) 6.0 + 1.0(.24 + .04) 10.0 + 2.0(.39 + .08) max Specifications are subject to change without notice. Special lead styles available upon request. rev.6a Radial Leaded, Epoxy Dipped Multilayer Ceramic Capacitors RD Series MERITEK PERFORMANCE SPECIFICATIONS 1.E LECTRICAL DIELECTRIC CODE EIA Temperature Characteristic EIA NPO X7R 0 ± 3 0 p p m / o C , C > 20pF 0 +120 /- 4 0 ppm / o C , C < 2 0 p F Operating Temperature Range - 5 5 o C to + 125 o C Measuring Conditions for Capacitance and D.F. 1 MHz, 1 Vrms, C < 1000pF Dissipation Factor (D.F.) and Tangent of Loss Angle (tan ) < 0.1% Insulation Resistance (I.R.) after 60 secs, charging at rated voltage, 25 o C , 55% RH max . Y5V C ±15% maximum Over - 5 5 o C to +125 o C C ± 2 2 % /- 82% maximum Over -30 o C to +85 o C - 3 0 o C to +85 o C - 5 5 o C to +125 o C 1 KHz, 1 Vrms 1 KHz, 0.5 Vrms < 2 .5 % < 5 .0 % > 100G ohms or > 1 0 0 0 M μ F > 1 0 0G ohms or > 1 0 0 0 M μ F > 10G ohms or > 1 0 0 0 M μ F Whichever is less Whichever is less Whichever is less Voltage Proof 25 o C , 1 - 5 s e c s 2.5 x Rated Voltage 2.5 x Rated Voltage 2.5 x Rated Voltage Capacitance Aging 0 2.5% per decade hour 7% per decade hour 2.E NVIROMENTAL Test Solderability Test Condition Post-Test Inspection Requirements Solder 60Sn/40Pb, 235 ±5 o C Im m er s i on 2 ± 0. 5 s ec . Depth of Immersion: 1.5 – 2.0mm At least 95% of leads should be well tinned No visible damage. Resistance to Soldering Heat Rapid Change Of Temperature Immersion in solder bath at 260 ±5 o C f o r 1 0 ± 1 s e c . Recovery: 24 ±2 hrs. (NPO) 48 ±4 hrs. (X7R, Y5V) -55 to +125 o C ( N P O . X 7 R ) - 2 5 T O + 8 5 o C (Y5V) 5 cycles, duration : 30 mins. Recovery: 24 ±2 hrs. (NPO) 48 ±4 hrs. (X7R, Y5V) C / oC NPO X7R Y5V < ±5% ±10% ± 20% No visible damage No visible damage Endurance 1000 hrs. at maximum temperature with 1.5 x rated voltage applied NPO C / oC DF IR Recovery: 24 ±2 hrs. (NPO) 48 ±4 hrs. (X7R, Y5V) < ±2% < 0.3% X7R Y5V < ±2 0 % < 5% < ±3 0 % < 10% R.C>25S 3.Capacitance Range SIZE RD15, RD16 RD20, RD21 NPO 10pF to 1000pF X7R Y5V 1000pF to 0.1μF 8200pF to 0.1μF 0.1μF to 1.0μF 0.15μF to 1μF