CERAMIC DISC CAPACITORS Class 3 Series: Semi-Conducting INTRODUCTION RoHS APPLICATION • Transistorized Circuits • Low Voltage-by-pass, Coupling. • Frequency determination where Dielectric losses, Hi-IR and Cap. stability are not of major importance. Single layer metalized ceramic disc with resin coating (wax impregnated). Class 3 is suitable for low voltage application and offers larger capacitance values PART NUMBER EXAMPLE 3 YV 473 M 120 A54 B Temperature Coefficient Capacitance Code Tolerance Code Disc 3mm max 20mm min Diameter (D) Packing code Lead Code Voltage Code ±0.05 mm(d) 5mm ±1mm DIMENSIONS (mm) & CAPACITANCE RANGE (F:Standard Lead Spacing. Other lead spacing may be available upon request.) Capacitance (µF) Voltage Code 0.01 103 0.022 233 0.033 333 0.047 473 0.068 683 0.1 104 0.22 224 0.47 474 12V, 16V YU 25V YV YP YU 4.5 F=5.0 4.5 F=5.0 7 F=5.0 7 F=5.0 7 F=5.0 9 F=6.35 9 F=6.35 11 F=6.35 50V YV YP YU 4.5 F=5.0 5.5 F=5.0 7 F=5.0 4.5 F=5.0 7 F=5.0 9 F=6.35 8 F=5.0 6 F=5.0 YV 4.5 F=5.0 5.5 F=5.0 7 F=5.0 13.5 F=9.5 9 F=6.35 7 F=5.0 ELECTRICAL CHARACTERISTICS Technical Data Specification Condition Capacitance Measured at 1KHz 0.05 VRMS, 25°C ± 2°C 0.01F-0.47F Operating Temperature Y5U, Y5V, Y5P -30°C ~ + 85°C Dissipation Factor (tan S) Y5U, Y5V, Y5P < 0.05 Insulation Resistance rated voltage at 25°C ± >°C and 70% R.H max 16Vdc, product voltage is 25Vdc Encapsulation Standard >1GΩ or 20MΩ Farad, whichever is less Phenolic Wax Epoxy Coating Solder temperature 250°C ± 5°C Dipping: 3±0.5 sec (Flur shall be used) Solderability of Leads at least 75 % covered Page 1 of 3 C1BE03 2013.12.16 CERAMIC DISC CAPACITORS Class 3 Series: Semi-Conducting TOLERANCE CODE TEMPERATURE COEFFICIENT CODE Code YP YU YV EIA Code Y5P Y5U Y5V Temperature Characteristics Characteristics. ±10 % -30 °C to +22 to -56% -30 °C to +22 to -82% -30 °C to RoHS +85 °C +85 °C +85 °C Code C D F G J K M Tolerance ±0.25pF ±0.5pF ±1%pF ±2% ±5% ±10% ±20% VOLTAGE CODE EXAMPLE Code WVDC 120 12V 500 50V RADIAL STRAIGHT-LEAD ON TAPE (S56 LEAD CODE) RADIAL KINK-IN ON TAPE (K56 LEAD CODE) *Most Popular Code Dimensions D 11.0 max d 0.6 ±0.05 P 12.7 ±1.0 P0 12.7 ±0.3 P1 3.85 ±0.7 P2 6.35 ±1.3 F 5.0 +0.8 -0.2 Dh 0 ±2.0 W 18.0 +1.0 -0.5 W1 9.0 +0.75 -0.5 W2 3.0 max H 18.0 +3.0 -0 H0 16.0 ±0.5 H1 32.25 max K 1.0 max D0 4.0 ±0.2 t 0.7 ±0.2 L 11.0 max Page 2 of 3 C1BE03 2013.12.16 CERAMIC DISC CAPACITORS Class 3 Series: Semi-Conducting REEL PACK (R SUFFIX) RoHS 253±5mm AMMO PACK (A SUFFIX) mm ±5 m 3m ± 48 330 LEAD CODES FOR BULK PACK (CERAMIC DISC ONLY) Lead Type C-Kink In A-Straight D-Kink Out 3.0mm 4.8mm max 4.8±1mm 25.4mm min 4.8mm max 4.8±1mm F-Special Length Y-Y Formed S & K-Taped See taping specifications 4.0 mm max 4.8 ±1.0 mm above. Per Customer Specification Lead Spacing Wire dia. (±1.00) in mm (±0.05) in mm Code 2 5 6 7 9 0 A P 2.5 5 6.35 7.5 10.0 12.7 15.0 HOW TO MAKE THE LEAD CODE FOR CERAMIC DISC (FOR BULK PACK ONLY) A67B Bulk Wire Dia. Lead Spacing Lead Type Code d 4 0.48 6 0.6 7 0.65 8 0.8 9 1.0 Page 3 of 3 C1BE03 2013.12.16